i have 5 checkboxes in one asp page, I am trying to get the values of all checkbox that are checked using for each loop but I dnt get any result,just a blank page. Herez my code where I am trying to get the values of all check boxes
Code:
for each cid in request.Form("chk")
response.Write cid & "<br>"
next
i have 5 checkboxes in one asp page, I am trying to get the values of all checkbox that are checked using for each loop but I dnt get any result, just a blank page. Herez my code where I am trying to get the values of all check boxes:
for each cid in request.Form("chk")
response.Write cid & "<br>"
next
I was trying to set up 3 menue drop downs for filtered relational selections of 1st-(Buildings), 2nd (Departments) followed by (Projects). I foillowed all the links and can not see how to get a onchange to work as relational menue. This would have been best. But 3 days later I am tight for time so I was attempting to just setup of the time being 3 seperate drop downs with submit. I can only get the departments to work. The building and projects will not filter as the departments. Code:
View Replies View RelatedI have a form that is passing a number to check box values with the same name (productID) but different values (numerical values). It is also passing a warehouseID as a hidden field.
I need to dump these values into an access table called wtbProductWarehouses with fields titled ProductID and WarehouseID. What is the code that I need to write to have it loop through all of the productID values and individually add each one to the db while also adding the warehouseID with it.
i want to do a voting, which let user select. how can i count the number of user vote?
n... how can i accumulate each slection and display a chart by percent?
example:
.apple
.beer
I have a web page where a user can select a location out of a possibility of 5. I also give them the option of seraching all 5.
However when I put this in it get rids of the drop down box and puts them all in an open box about 2 inches in length. Which isn't too bad but if I say had 20 locations it would take up half the page.
I released to open source a while back but forgot to post in here a DLL that was used in some of our older developments. It's not really a live project, but may be of use to peeps in here given some of the recent queries:Quote:
DBSite: Written in Visual Basic this DLL helps solve issues for ASP web developers, e.g. handling uploads, safe parameter population for stored procedures (sql injection checks), SQL XML calls, file system browsing, etc.
I was trying:
Code:
<!--#include file="lang/<%= Request.QueryString("lang") %>.asp"-->
But it doesn’t work.
How can i create a multi tab page in asp.net 2.0?
create a frame and a number of page with hyperlink?
Would i have some directives?
How can I update/delete a record which is linked to another table with a
unique field. I know the select inner join, but no update/delete.
Trying to join three tables and find the records which DON'T match OR have less than x number of matches.Not sure how to go about it.keep getting matching fields only.
View Replies View RelatedI need to create in asp/access/javascript a questionnaire that shows a single question on each page of which there are five then after the last question create a new record in the access db and write the answers.
View Replies View Relatedlets say we have a ms db with two cols
id value
1 4
2 7
3 9
4 1
is there a simple way of updating all the value fields with one form? so i can have the page lay the four value's out in a list, the user could then edit them and hit update and this would update all the value fields. i can update single records no problem but have no idea where to start with this one.
I have a form field called Streets that contains 'HIGH STREET,MAIN STREET'
I have a field in my access db called StreetName a single record would contain one street and I want to return all records that have a StreetName in the Streets field. How would I go about this?
I do not write the whole code.
I have a IF statement like the following.
if request.Form("UyeTipi") = 1 then
strsql=select ****
else if request.Form("UyeTipi") = 2 then
strsql2=select *****
this is the recordset
set objRecordset = objConnection.Execute(strSql)
With loop I want to display data either from "strsql1" or "strsql2"
I create table like the following with loop
Code:
I am working in an asp/Vb script environment.In a form I have 2 combo boxes.first is main criteria and second one is sub criteria.in the first combo I have made predefined enteris(the headers of the table)say a table is:emp and its headers are:empid,empname,L1manager,accounts,location etc.
on a change event of first combo,I want to fetch the details from the table.say if I selected Ename in first combo.the second combo should automatically fetch the listed Enames and vice versa.
My left frame contains a combo box which loads the selected record in the main frame.The combo box retrieves concatenated 3 columns from my db. E.g. ID, Firstname & Surname.
Because of this, it seems to blow out the size of the frame,thus ruining my nav system.Does anyone know how I can restrict the box width, but allow the drop down part to remain wide?
How do i select a completly random record from a database?
sql = select (random) from tbl, sort of thing.
I have searched through a lot of paging articles. But I have not found any specific recommendations for my issue. I have a large record set that I need to page through (1000 records). But on each page (100 records) I must be able to select some rows, add
some comment for each and sumarize them on-the fly.
if I page forward and backward, I still need to see before selected rows with comments and I can even deselect or edit some of them. Should I store all this information (selection, comment, price) in session variables or is there a better way?
I am working in an asp/Vb script environment. In a form I have 2 combo boxes. first is main criteria and second one is sub criteria. in the first combo I have made predefined enteris(the headers of the table) say a table is:emp and its headers are:empid,empname,L1manager,accounts,location etc.
on a change event of first combo,I want to fetch the details from the table. say if I selected Ename in first combo. the second combo should automatically fetch the listed Enames and vice versa.
My site is running on IIS5.0 hosted on win2k service pack 4 m/c. We are going to procure high end windows M/C . I seek your advice in selecting right os and version of IIS. My comp is a bit hesitant to migrate to .net too (I don’t know planning of comp in future).My requirement should be
1) Same Program should run on new server with minimum changes.
2) If required we can migrate to .net (although planning is not in near future and I even don’t know what is needed for that)
Your advice in this regard is highly appreciated. Also if you can explain in short about new feature in IIS6.0 (or upper version). Which version of IIS come along with Windows 2003 server, I really have very little knowledge in this field.
i am using frontpage ,ASP, and some javascript. how do you create a START-> ALL PROGRAMS selection option. you place the mouse over the "all programs" and you got all selection related to "all programs"
i want to do the same thing with data from a database. how do i do this?
I have written a asp application whihc uses a number of pages and each page connects to a sql database.
Currently I have the connection script coded on each page however if i need to change the database I have to change every page.
I have been told there is a way to have the connection on one page and each page to referance this one so I only need to change the one page
As part of the development of a shopping basket function, I've a two dimensional aray which I'm storing in the session variable.
I want the array to be dynamic to store any amount of products which may added.
I am getting a problem when trying to write to the second row to the array, saying that the subscript is out of range...
You can see an example of this at:
http://www.foulkestudios.com/session.asp
I am getting what should be the first empty row by getting rows=UBound(myArray,2)
I'm then trying to add into the next row by using rows + 1
I am b-testing a community site, with currently 1,000 or so membership,
and low concurrency, say no more than 5 on-line at once.
The site is hosted on a shared server, which is sufferening from
intermittent accute slowness, affecting all other hosted sites as well as
mine.
The finger of suspicion is pointing at me and possible sloppy code. As
this is the first site I have done of this nature, could someone recommend
reading matter (knowledge bases etc), especially coding samples, in
connection with data connections (opening and closing connections and
objects) and record locking issues, which if improperly coded, could
contribute to throughput bottlenecks due to inefficient use of resources so
that I can check out my pages and correct any nasties..
I am think to write a code that will need more then 2 servers.
Can anyone give me some information to do code like that?
Like yahoo, google, msn.
I need to develop an application that will span 12 or so pages, and on the
last page, it lets the user review the data and then insert it all. This is
kind of like selling something on eBay, you give it information, click next,
enter more info and then at the end you review and submit the item. I was
thinking about sessions, but some of the fields are pretty big, like
varchar(5000) so I didn't know if there was a way to handle these big
fields.
I am in the process of developing several web sites that will accommodate up to 3 or 4 languages. The sites are not that complex, but will use an Access database for some data presentation/storage. Each page will have a series of flags for respective languages. Ideally, if someone enters on a "gateway" page for say Gallery, and they choose another language, I would like the same page to display but in a different language (there might be a page for each language, but if I can avoid that I'd rather).
So here are my thoughts on how to approach this. Have a session var for language preference and set it in a Global.asa file. I would think it could be set dependant on the origin of the request, .de, .co.uk, .it, etc. Then, if the code is not too verbose, use Case statements in the code to display content based on language preference. One thing of a bit challenging for me is that if the "flags" are in an include file, how can I get them to when clicked go to a script, change the session variable and return to the page from which it was clicked. Am I on the right track with this approach.
I have a database full of info and I have display.asp which I want to display 10 items at a time so I have display.asp?page=1, display.asp?page=2, etc.
How do I go about actually filtering the database to only produce 10 results per page? I was trying to use:
results.Move 10
and things like that, but I'm not sure of the best way around this.
I have a table in the db and one field in the db is an email field various records can have the same email address in. When an email address changes from x to y I want to be able to change an email address x in every record in the table to y, how would I do this?
View Replies View RelatedI was wondering if anyone had any links to some resources / tutorials or could offer up some help with regards to my current project.
The concept is pretty simple. Multiple user login - which are then presented with a page where they need to answer some questions (drop-down responses). These responses are then checked against the answers and the points are then added and the results list the different users in descending order.
Help and suggestions with any part of this would be greatly appreciated!
I know this will be linked to a database (open to suggestions about which to use) and then how to structure my tables.
Will the Request.form show the correct order that they were displyed in or
will it do something different. I have been testing and it always shows the
order they were displayed.Is this just coincidental?
Simple question no doubt -
I am trying to send an email to a form variable as well as a list of addresses, but I can't seem to get it to work. Please help.
I want to combine these two lines - what is the syntax?
Code:
MyCDONTSMail.To= "xxxxxxx@nzl.xerox.com"
Code:
MyCDONTSMail.To= creat_email
They work individually (I have declared creat_email).