Nested Loop
I want to loop through a certain number of records in the recordset and then create a second loop for the remaining records. How do I capture the last record on the first loop to use in the second loop?
View Replies
ADVERTISEMENT
Nested Loops
What I'm trying to do is match all buyer requirements in a database table to all available properties in another table. I then want all these matches displayed in a report with the buyer name followed by the relevant matching properties, this should occur until all buyers have been displayed with their matching properties.
The problem is that it only works correctly for the first buyer for which the correct properties are displayed, after that all I get is the buyer names without their matching properties... so it seems to loop perfectly the first time but from then on forgets about the inner loop! Code:
Nested Menu
My last (maybe) problem is to make a nested menu (I think is possible only with Java) and I must take the names of the selections from a DB ...
is possible? I can't find documents where is explained how to use MDB files with Java
Nested Recordsets
I have an array of items and for each item I need to find sizes and and for each size I need to find colors The array of items comes from the previous page. Code:
View Replies View RelatedNested Subroutines
I am using IIS 5.0, ASP and VBScript. I am puzzled by recurrences of errors when I nest subroutines, and I'd like to know if there are rules for that which I don't know. Would functions work better instead? I am not much of a coder.
View Replies View RelatedNested SHAPE
I'm using the following SHAPE command:
SHAPE {SELECT * FROM Chapters WHERE SchoolID=320}
APPEND ({SELECT * FROM ChapterLink}
RELATE ID TO ChapterID) AS Advisors
({SELECT FirstName, LastName FROM LocalAdvisors }
RELATE UserName TO UserName) AS AdvName
I get an error, "Column (UserName) does not exist in the appropriate rowset", which is correct, the UserName column actually exists in the ChapterLink table. But, I can't figure out how to construct this SHAPE command so that it works like that.
Nested Recordsets
I have taken over a program that uses a mixture of javascript and clasic ASP. However i am trying to get rid of the javascript and just use ASP.
However the code uses a nested recordset as the secpnd recordset needs a result from the first to run correctly. I have managed to change the code so that it goes through the first record but I can't get it to loop through the other recordsets. So it writes one results and then just a blanks.
Is it possible to use nested recordsets for more than one result? If not what are my options for fixing this problem?
Nested If Else Conditional Statament
I am not too sure wats wrong w the if-else statement below!
<%if(grp==grp2)%>
{
<%if (start==req || end==req)%>
{
<%=grp%>
<%=start%>
<%=end%>
}
<%else%>
{
<%="There is no such record found"%>
}
}
<%else%>
{
<%="There is no such record found!"%>
}
<%endif%>
Error: 'else' without 'if'.
else
^
Nested SQL SELECT Commands?
I have an ASP page where I build a html table dynamically by reading a database table and populating the <TD> cells with the fields of each record.
I want the last field to be a html drop down list that contains values read from another db relation in the same db. It would seem to me, (i'm novice) that this would require nesting SQL SELECT Code:
Repeated Recordsets (nested)
I am trying to produce a results page where the results come from three seperate tables.
e.g. The main query gets a list of results, for each one of those results I need to display data from another table. I have a list of bars, restaurants, hotels etc.
I want to display the details of those in sections (a bar section showing all the bars etc) each one of the bars is ranked by members. When I do this I get a "type mismatch" which I guess comes from the fact I am trying to equate an array to a single value. How do I get round this? Code:
Error Messages Nested
When an HTTP 500.100 occure in IIS 5.0, I was getting redirected to a HTTP 500.100 -'page cannot be displayed' error page when there was an error, but now in IIS 6.0, I get 'Microsoft VBScript runtime error '800a01c2' ' nested within the page.
I'm trying to create my own error messages so it will re-direct to my own error page and send me an email. I used to be able to do this in IIS 5.0 but I can't seem to get it going in IIS 6.0 as it doesn't re-direct to a default error message.how to get IIS 6.0 to work like IIS 5.0, or is there another way of doing it, or is this not even an IIS problem.
Triple Nested Quotes
Can someone tell me how to write this line so I don't get an error - I've tried various ways to nest the quotes,but I still get an error saying that an ")" is expected.
Code:
response.write("document.write('<form method="post" action="message_send.asp?subject=" & _
Request.QueryString("subject") & "" onsubmit="return preValidate(this);">);")
Is there any other way to feed the result of an ASP function into Javascript other than by getting ASP to write out the JS as above?
Nested For Each Overload Array
I would like to know what I'am doing wrong with this loop & Array's... Keeps over oading but unsure why... Would anyone know why and know a sollution?
ERROR:
Microsoft VBScript runtime (0x800A0009)
Subscript out of range: '6'
CODE:
For Each i in TArrSpl
For Each e in TId_Arr
IF TId_Arr(e) = TArrSpl(i) THEN
' CODE
ELSE
' CODE
END IF
Next
Next
Read Nested Nodes In XML File With ASP
I have to read a XML file in ASP and save the values in a database. I can get this work, but I cannot read some nested nodes of the xml file. This is a part of the XML file: Code:
View Replies View RelatedPassing Value With Nested Repeating Region
I am passing values from Supplier_Details.asp to Supplier_Products.asp, when I click to view the details of the supplier I want, their values goe to the other page ( supplier_product)that I want all his products to be displayed.
so far I can pass values and could be displayed, no problem but when it comes to displaying all the products, it;s then where I am stuck, with the previous tutorials ( nested repeat region) I can get it working and I tried to have that example working for all this, so far it;s not, so is it possible to do it ? Code:
Nested Includes Not Working As Intended
I'm working on a new site that has a nearly empty index file (variable
location) that includes a template file (set location) which in turn
includes two data files (variable location dependent on index file's
location). This concept worked in PHP and I'm just playing around with it
in ASP to see if it can make my site management easier because I can't move
to Apache for a while.
It seems that the template file can only include relative to itself and also
with specific paths, but it can't include relative to the original index
file.
Parameter Not Passed From For Loop To While Loop
I'm trying to pass a parameter from a for loop to the nested while loop
but only the first counter is passed. Here is the code:
Nesting One Loop Within Another, Using 1st Loop As Criteria For 2nd
I have a recordset that I loop through all of the data within a table, within the same loop, I am trying to add another loops that pulls information from the first recordset to base the second recordset off of: Code:
View Replies View RelatedDo While Loop?
I have a case statment like
select case code
case "01"
ups_desc = "OPTION1."
case "02"
ups_desc = "OPTION2."
case "03"
ups_desc = "OPTION3"
case "07"
ups_desc = "OPTION4"
case "08"
ups_desc = "OPTION5 "
case "11"
ups_desc = "OPTION6"
case "12"
ups_desc = "OPTION7"
end select
I then have table called "users" which has the following
id
UserID
Code
now the trick
I want to loop through the recordset of the user tables and populate a drop down where the code from the case and the user table are the same.
Something like
do while rs("code") = code
<option> This then is populated based upon the loop(I have this code)</option>
loop
Do While Loop
I need to insert recordes into a db based upon a number returned in a form
Somerthing like
AddRecords = Request.Form("NumberOfRecords")
Count = 0
if Count < AddRecords Then
Do while Count.eof
SQL Code....
Count = Count + 1
Count.move next
Loop
End If
How To Loop
i have 2 tables (A & B) with date records
now i loop table A and then table B, the output will be table A in the front
and table B in the back.how can i make the output show by date in both tables altogether?
do i need to combine tables before but the number of records is over 100K
which may spend a lot of processing power?
Asp Loop
on my classifieds site i would like to create a simple ads system. i currently have the ads site made but need some advice.
on my classifieds site i would like to display the ads down the left hand side.
however i dont want to over display ads.
if there is not many items listed i only want a small amount of adverts shown on the left hand side. however if there is lots listed
i would like quite a few adverts listed.
otherwise i would have a big list of adverts and only a small number of items listed making a big blank space on my page.
i am guessing this would have to be a loop or something.
the code i am using to show the text links is <%=adurl%>
For Loop
I am using a for loop in one of my asp page. Could someone let me know if I can do the for loop as follow:
[code]<% for i = 1 to 5 %>
my html code
my html code
my html code
<% Next i %>
instead of
[code]<%
for i = 1 to 5
Response.Write "<input name = 'id'"&i&" type='text' value = "&id& ">"
Next i
%>
More Than 1 Do Loop
I am using ASP and need a DO LOOP to get some info back from the db. but the asp reads the first do loop but does not read the second one ......
View Replies View RelatedWhile Loop
is there any function or statements that work the same as the 'break' statement in C++ language?
for example:
While Not rs.EOF
If rs("LoginID") = userId Then
break 'what shd i use for ASP???
Else
rs.movenext
Loop Within A Loop
im writing some script to add records to my db. but if a value thats about to be added exists, then dont add that record.for example: if i want to add 7 records to my db with the values 1 - 7, but the db already has 3, 5 and 7, then it should only add 4 new records (1, 2, 4 and 6).
i have a record returning all records form my db, and an array with the values i want to add. i want to loop through my recordset of all existing entries, then for each loop, start another loop to see if the value exists, and if it doesnt , then add a new record.
For Loop Or Do While Loop
How to use the for loop or do while loop to create the age range from 10 -100 to let the user to select from the form object - list/menu by using asp? The coding below is just a concept. For example
Response.Write("<select name=""select"">")
for (a=0; a<101; a++)
(
Response.Write("<option value=""" & age & """>" & age & "</option>")
)
Response.Write("</select>")
If Then Else Loop
I'm trying to create a page where images are displayed based on an id in a sql table (basically its an unlit candle until a value in the id field exists). I'm not getting an error with my code below - but its not working right either. Code:
<% If rs("my_id")="2" Then Response.Write "<img src=""images/07.jpg"" width=""56"" height=""97"" alt="lit candle">"Else Response.Write "<img src=""images/UNLIT_07.jpg"" width=""56"" height=""97"" alt=""unlit candle"">" End If %> ...
Sub And For Next Loop
I have a SUB which has input variables. If I run it once its okay, but I need to include it in a for....next loop. Can this be done ?
for i=0 to 100
call mySub(arr(0,i))
next
sub mySub(var)
.....code
end sub
RS Loop
I am getting this error:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver]Numeric value out of range
(null)
/database/data_entry.asp, line 90
Line 90 is shown below...
// count the total records by iterating through the recordset
for (rsProducts_total=0; !rsProducts.EOF; rsProducts.MoveNext())
{ <---- Line 90
rsProducts_total++;
}
This is an access database, connected to via a DSN. Any help will be muchly appreciated! I'm stuck on this one.
For Next Loop
I'm using three loops on a page and would like to set the loops individually to start at either 0 or -1 based on a condition. As an example, I would want the loop to start at either -1 as shown or 0.
Dim r
For r = --1 to Session("TotalRowsF")
code...
Next
Or, based on the condition it could be
Dim r
For r = 0 to Session("TotalRowsF")
code...
Next
ASP Loop
I can display some text 5 times using a loop and i want to pass those printed
values to another page when i clicked send button.
Loop D Loop
I'm trying to give the variable sStart a new name on each loo
EG
sStart1 = value1
sStart2 = value
however the following piece of code doesn't work
set oNodes=xml.selectNodes("/Project/Tasks/Task/Start"
for each oNode in oNode
sStart=oNode.tex
response.write("<BR>"
for i=0 to 10
response.Write(sStart(i)
nex
next