When I create a ADODB.RecordSet object and then try to loop through the results, everything works fine, unless when I am done looping through the results I need to call the movefirst on the recordset object. If I happen to have used an ORDER BY in my SQL, it bombs out. Code:
I am trying to modify the code in an existing ASP page that displays records when it runs. The code in the where clause I wish to change is as follows:
where_clause = where_clause & "[DateWOCancelled] Is Null And IsNull([ACT_IS]) And ([PROP_IS] < Now())"
This works fine, but I need to have the clause also evaluate another field (Rev_IS) to see if it contains a date, and if it does check to see if it is < Now(). If the Rev_IS is not null, I don't care any longer about the date contained in Prop_IS. I only want to evaluate if Rev_IS < Now().
I'm starting in asp and I'm trying to do a simple sql query to display a number of records on a page using the limit clause. I keep getting a syntax error in my from clause. Here's what I'm doing:Code:
rstProd.Source = "SELECT * from TBL_PRODUITS LIMIT 0,10"
I have no problem using this clause with PHP so I was wondering if there's some restrictions with it in ASP??
I am using the DateDiff function to compare two dates in a query on a page. I then need to use the "Expression" created from that DateDiff function in a WHERE clause calculation, but it is not working correctly.
The page loads successfully with thre recordset populated, but the WHERE clause has no effect on the data. I'm guessing that I am doing something very wrong, but I have been staring at this for hours with no avail!
Got a bit of code, which I want to loop through, unless the current value is "", in which case I need it to skip to the next one, but how do I do it?
Response.Write "<br />" & vbCrLf For Each strItem In Request.Form If strItem = "" THEN 'these next two lines, I only want to be processed if the above does have a value in it Response.Write "-" & strItem & "-" & vbCrLf Response.Write "-" & Request.Form(strItem) & "<br />" & vbCrLf End If Next Response.Write "<br />" & vbCrLf
I am trying to connect Flash with ASP. I did few examples successfully, but I am stack on this one and I get error from the sql statement. I dont see anything wrong with it. The code is:
set conn = Server.CreateObject("ADODB.Connection") conn.ConnectionString = "Driver={Microsoft Access Driver (*.mdb)};DBQ=" & Server.MapPath("example.mdb") conn.Open set record = Server.CreateObject("ADODB.Recordset") query = "SELECT * from TABLE WHERE NAME= " &action1 record.Open query, conn
The error which I get is: Error Type: Microsoft OLE DB Provider for ODBC Drivers (0x80040E14) [Microsoft][ODBC Microsoft Access Driver] Syntax error in FROM clause.
I am trying to design a page that displays data from a query in groups of a field in the where clause and then displays a 'total' per each group. Code:
i got a field named register_date, its input a table named member when a user register in my system, What im trying to do is i want to display daily registration in seperate table, anyway the database im using is mdb file, and data type for register_date is data/time.
so below is my coding, but i can get the table to be displayed, can someone tell me what wrong with my coding? Code:
I have created the following code to create the recordset rsToBeApprovedLocalItemID. Unfortunately, the for next loop works properly only on the first cycle. The response.write(arrToBeApprovedCatSub(0)&arrToBeApprovedCatSub(1)&"<br>")works for each loop but the SQL statement sqlToBeApprovedLocalItemID returns a populated recordset only on the first loop.
On subsequent loops it is empty even though the arrToBeApprovedCatSub(0) and arrToBeApprovedCatSub(1) are alive and well. What's going on? This is truly weird behaviour. I have not come across something this funky before. Code:
I am using a Relational database for my site and i have the following tables:
FIXTURES, GAMEDATES
the fields in FIXTURES are:
GameDate Home Away
(All of the above are numerical fields)
the fields in GAMEDATES are:
DateID(integer) GameDate(#Date Field#)
What i have done is in the GAMEDATE field in the FIXTURES table i have used the ID number of the date that i wish to assign to that record - using a LEFT JOIN to display the actual date that is pulled from the GAMEDATES table (That which corresponds to the relevant id used in Fixtures)
The problem is that in some of my code i want to display records using sql and sometimes in the where clause i use the following:
WHERE Fixtures.GameDate<=(Date())
obviously meaning WHERE GAMEDATE is LESS THAN or EQUAL to TODAY.
The thing is when i use the join it does not use the where clause and displays all of the records in the FIXTURES table.
Does any one know how to get around this, i have not received any error messages it just isnt displaying the right data
Why is it that whenever I press "search" it's saying:
SELECT * FROM bible WHERE verse_spoke LIKE '%jehovah%'%' AND ( spokes = '004') AND ( recordType = 'gn' OR recordType = 'is' OR recordType = 'ro') Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error in query expression 'verse_spoke LIKE '%jehovah%'%' AND ( spokes = '004') AND ( recordType = 'gn' OR recordType = 'is' OR recordType = 'ro')'.
Error Type: Microsoft OLE DB Provider for ODBC Drivers (0x80040E14) [Microsoft][ODBC Microsoft Access Driver] Syntax error in FROM clause. ----------------------------------------------------------------------------------
Yes, I know this question has been answered a million times, however, I've already searched through this forum and my problem still hasn't been resolved.
Basically, I keep getting the error above whenever I try to execute this code. This code is from a search page entitled search.asp.
This is a follow up to a question I asked two weeks ago which I thought was solved but on further inspection I realised it wasn't working fully. I have an ORDER BY on my search results page, the search uses two dropdown menus, the first one is start character (A-Z), and the other is grade.
The problem I have is that the ORDER BY work perfectly when I leave the start character dropdown blank, and when I use the grade selection dropdown, but when I select a start character I get this error message:
An ASP page outputs data from the query "Select ThisAndThat from comments WHERE pageURL='" & pageURL & "' ORDER BY threadID, datesent" (Access mdb) threadID is a string (OK, I know!), which means that 103 displays before 99. Is there a way to write the SQL query to order them numerically? This would be much easier for me than changing the data type and hunting down every page that INSERTS or UPDATES the db.
I am extremely confused about how i should go about doing this: I have puled out current orders and have displayed in a table .These orders have their own order numbers.
Once the person clicks on first order,the order is displayed in a form,where the user can edit the order details and hit submit.
Now when he hits submit ,I want his to go the previous page where the orders are displayed in table ,so that he can click on the next order and process it/OR may be whent he user hits submit ,i want the next order directly to be displayed in the form.
I have a table in my database with several numbers.(2, 5, 8, 0, 9, 0).Now i retrieve the numbers to my page using "order by numbers", and my page look like this.
0 0 2 5 8 9
I want the lowest number to be first, but if the number is 0 (zero) I want it to go to the bottom.Can that be done
I have one table wich has a unique ID feild for each record and other feilds, and another table that has one field that is a number that contains the an ID from the other table and another field that contains some text.
I want to open with sql the first table, but order its records alphabetically by the text in the second table. is it possible? Code:
When I have the recordset in the order as follows, all works well: (Recordset2.Fields.Item("ProductName").Value) (Recordset2.Fields.Item("ShortDescription").Value) (Recordset2.Fields.Item("Thumbnail").Value)
Though if I have the Thumbnail first the description does'nt show.
I've got a site with PayPal and Google Checkout payment options. The checkout page formats two HTML forms, containing bespoke cart code - one posts to PayPal, the other to Google Checkout.When an order is placed, it needs to be updated back on my site, so that the order is marked as 'paid' in the database. When this is done with PayPal, I just provide a hidden field in the form called 'invoice' containing my id number for that transaction. This is returned in my IPN, and I update the database accordingly. However, I can't find a similar field in Google. Their example code all seems to be in XML and is WAAAAAAAAY more complicated than I need it to be. I just need to send a value with my cart code to Google Checkout, and have that value returned after the transaction has completed. I've set up Google Callback, and the page is being called and the order is being written to my google log txt file, I just need this to contain my order id number for the transaction so I can just add the logic to update the database based on this id number.
I've written the following piece of code which is embedded in HTML. For some reason when the script is processed the last response.write statment is displayed before the information in the while loop. I can't seem to figure out why this is happenming.
I'm working on a list of members.In my db I have two columns lastName and marriedName lastName is the member name before they got married and legLastName is their lastname after they got married.
Now I need to display theese two columns in alphabetical order in one list. If I for example have theese members: lastName, marriedName Anderson, Johnson Petersson, Svensson Nilsson, Persson Lindgren, Johnson
I want this result: Anderson Johnson (look for Andersson) Johnson(look for Lindgren) Nilsson Persson(look for Nilsson) Petersson Svensson(look for Petersson)
I am processing the variables from a form submission with a for/next loop. The problem is that the order of the variables are NOT written IN ORDER.
Form field 1 prints fine but then it jumps to Form field 9 and then back to Form field 4 then to Form field 2, etc. IS there a way to process the form variables in a loop in ORDER? field 1, field 2, field 3, etc? Code: