Problem With Select Query

i am getting the problem with Select Query..

i am storing date as

<form name="main" action="Addingdailyreport.asp"

method="post" onsubmit="return CheckForm(this);">

<input type="hidden" name="tdate" value="<%=date()%>">
</form>

and when i am going to display .... the Query is like this

sql = "select * from reports where username = '" & session("userid") & "' and tdate=" & date()

it's display nothing...

Date is storing in date base like ... dd/mm/year

View Replies


ADVERTISEMENT

Sql Select Query

I want to select all the field form the database where name is not empty.

View Replies View Related

SELECT Query In ASP

I have created ASP file from MS Access. It has the following Code. But
it gives an error at:

rs.Open sql, conn, 3, 3

The Error is:

Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E10)
[Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected
1.

/MyWeb/ERP-IR Distribution.asp, line 23

This error only comes when I write query that includes WHERE clause,
simple SELECT query runs without any error. Code:

View Replies View Related

Error With SQL SELECT Query

I am trying to run an SQL SELECT query, however, I am experiencing some problems with it.

It is coming up with the error; " Microsoft VBScript compilation error '800a0401'

Expected end of statement "

It is pointing to line 46 which is highlight in bold within my code below; is the error coming up because of the way I have formatted the query?

strSQL = "SELECT * FROM tbl_lunch WHERE (((tbl_lunch.Type)="general")) ORDER BY tbl_lunch.Type;"
Thanks for any help you may be able to give me on this

View Replies View Related

Apostrophe In SELECT Query

I'm trying to query a database where some records contain apostrophes in them. Is there an effective way to do this?

View Replies View Related

SELECT Data Form A Query

i try to get data form access with asp. The select contains 2 Subselects. If i set this SQl statement in Access it works. But if i set this in ASP it doesn't. Why??? There is no error. It's completly the same statement.

View Replies View Related

Select Query Database Error

I have created a query and everytime I try to run it I get this error:

Microsoft JET Database Engine error '80004005'
Record is deleted.
/vsadmin/inc/incsearch.asp, line 162

This is the query: Code:

View Replies View Related

Query: Select All Registries From The Past 30 Days

I need to select through a query, every record with the date that is from the past 30 days from now. Any hint?

View Replies View Related

Select Query According To User Input For A WebPage In C#.Net With SQL Server 2000

How to select query according to User Input for a WebPage in C#.Net with SQL Server 2000.I am trying to build a web page in C#.NET with SQL Server 2000 using Visual Web Developer 2005. I want to select and execute the query according to user input.

I have a form which has 2 textboxes which gets start date and end date from the user. Based on start/end date my 1st query runs. Now if user does not enter any start/end date I want to run another query which takes default dates from database(which is in varchar:ex. now()/now()-180) according to logged on user's permisstions.

How to select query ?

View Replies View Related

Need To Convert This Sql Query For Access To Identical Sql Query For Sql 2005..

My code retrieves a username and a password from a form. Then this information is compared to some usernames and passwords that are stored in a database. The important thing here is that the comparison must be case sensitive meaning that "passWord" is not the same thing as "password"

I have this code, working fine in access 2003

SQL = "SELECT * FROM users WHERE StrComp(username_column,'" & entered_username_in_form & "',0) = 0 AND StrComp(password_column,'" & entered_password_in_form & "',0) = 0"

but get the following error when I run it against my sql 2005 database.

[Microsoft][SQL Native Client][SQL Server]'StrComp' is not a recognized built-in function name.

I don't know the corresponding t-sql for the query.

View Replies View Related

Error Using <select></select>

I have written some code which should dynamically build a table which is then populated with questionas and possible answers. The format of the answers will vary ie they may be in the form of a radio button which will be rated from 1-5, checkbox or a selectbox.

The first problem I have is if I do not comment out <select></select> I get an error message saying the page can not be found. when I do take it out I get asp timeout. Code:

View Replies View Related

Query A DB - Pass The Query To Next Page

I am running a querry on an access database and have set the number of records/page displayed at 20. if there are more than 20 records returned, then 1st page will show the first 20, the next page will show next 20 and so on....

The trouble:

the count of total records displayed is correct and the first page is displayed correctly. But when i click on *Next* to go to the next page, all the records of the database get displayed (not the 2nd page of records from the query).

View Replies View Related

Query Access With Multiple Query

I am using ASP/MS ACCESS to see how I can query the same database, via 2 formfields.

{name: - search}Textfield 1: - Search by Category
AND/OR By
{name: - searchT}Textfield 2: - Location

Currently,

strSearchwords = Trim(Request.QueryString("search")); where "search" is the name of Textfield1

Which is fine, but how can I set it so that on Submit, the string from search, and searchT are somehow joined together into one string?

View Replies View Related

ASP LIKE Query Using Parameterized Query

In Access you use "*" + [passed variable] + "*", + can be replaced with &
Calling a parameterized query in Access requires % be used in place of *,
however, all that I have read show dynamic SQL passed to Access:

WHERE [some column] LIKE '" & ASPvar & "' % ORDER BY ...

However, my call is similar to:

conn.qMyLookup strVar, rs

If I modify the query in Access to:

"%" & [passed variable] & "%"

I get all records. If I only put it at the end, as suggested, I only get
matches at the end, not throughout the column. Code:

View Replies View Related

Select

does anyone know what I have wrong with this select in my form?

<%
sql = "SELECT * FROM [LTAB_CAProcessArea]"
Set ProcessAreaRS = Server.CreateObject("ADODB.Recordset")
ProcessAreaRS.Open sql, SessionCPRDBConnection, adOpenStatic, adLockOptimistic, adCmdText
%>

<select name="processarea">
<%
Do While Not ProcessAreaRS.EOF
Resonse.Write("<option name='" & ProcessAreaRS("processareaID") & "'>")
Response.Write(ProcessAreaRS("txtProcessArea"))
Response.Write("</option>")

View Replies View Related

<select> Help

I don't know if this is in the right section. I hope it is.I have an HTML document that uses tables and stuff. I also have a FORM on there with some input boxes, Radio buttons and <select> options.
I have a .asp VB file also that processes the actual form and writes the answered questions to a text file on the server (tab separated)
My problem:
The input boxes and radio buttons work fine. It writes to the text file on the sever end.

My problem is I am not too sure how to go making the answers from the <select> options to also write to the server. They way I have it set up right now, it jsut writes "NULL" on the text file.

View Replies View Related

SELECT Last Vs SELECT Max

I've recently come across using "Select Last" in an sql query. Does anyone have any info or views on using it? Until now I've relied on "Select Max" but Select Last would have distinct advantages when using random autonumbers. I'm also curious about why there is so little info on it - perhaps I'm looking in the wrong places?

View Replies View Related

[Select][Value]

I want to display an editable page extract from MS Access table. Now I want to show the value in Select list, extract from another table. Both tables are joinable with the foreign key.

In simplest, I want to extract and display the exact value from a table and show in Select list for edit.

I could not think of any way. I can bring up data and display in Select list but it would display the first value in the list only.

View Replies View Related

Select

i want to select all ids from table1 where those id's arent in table2
Sounds simple and iam sure could be possible in a single sql statement

View Replies View Related

SELECT TOP 50

I have the following SQL SELECT statement below that doesn't like the TOP 50 parameter. When I remove it, all is good. When I put it back I get "Incorrect syntax near '50'".
Code:
SELECT TOP 50 SSN, LName, FName, License_Certificate, Character_Identifier, CertificateNo, " & _
"tblIndividualInfo.IndividualID, tblLicense.LicenseID FROM tblIndividualInfo " & _
"INNER JOIN (tblLicense INNER JOIN stblLicenseType ON tblLicense.LicenseTypeID = stblLicenseType.ID) ON " & _
tblIndividualInfo.IndividualID = tblLicense.IndividualID " & strWhere & " ORDER BY LName, FName

View Replies View Related

Select Box

how to insert multiple items in a select box into a database. For example:

<select multiple name="ComservGroupAge" size="3">
<option value="Children">Children </option>
<option value="Adolescents">Adolescents </option>
<option value="Adults">Adults </option>
<option value="Does Not Matter">Does Not Matter</option>
</select>

I don't want it to go into my db column as one long field.

View Replies View Related

Select Sum

for this part. can i use

select sum (orderqty) from custorder

i attach a pic file to show wat i wanted to do
a few data will be listed out
i want the total from that particular few records only. not the whole records in database

View Replies View Related

SQL SELECT

I know this is an ASP forum but I've also gotten answers to my SQL problems here and I'd appreciate your help very much.
I have these two tables in SQL. Both tables have the same two columns (Description and SiebelName). I want to some how write a script that will look for the descriptions that matches the ones in Table1 with the ones in Table2 and if there are any I would like to take the column in Table2, SName, and update the column in Table1, SiebelName, with that of Table2.
Here's what I attempted to do but it's not working:
--------------------------------
UPDATE tbl_MasterTEST
SET tbl_MasterTEST.SiebelName = Siebel.SName WHERE (SELECT tbl_MasterTEST.ProdDesc, tbl_MasterTEST.SiebelName, Siebel.SDesc, Siebel.SName
FROM tbl_MasterTEST, Siebel
WHERE tbl_MasterTEST.ProdDesc = Siebel.SDesc)

View Replies View Related

For Each And Select

strSQL = "SELECT * FROM mod48 WHERE N_GEN = 5"
oRs.open strSQL,oConn,3

this table has alot of fields. I want it to automatically create alot of Text boxes for each field. But i also need the fields names. The only thing is that the field names in the table are well not very user friendly.

n_gen = General Numer
pa_name = Client Name
pa_surname = Client SurName

So i was wondering is there something i can do. Like a For each that will create alot of tect boxes for each field "with its value in it" and also make it write a description for the lable. Code:

View Replies View Related

Select Max 2x

Ik want to select 2 MAX values form one table, but i don't know how that works, and i can't find it anywhere.

This is what i got so far:

sql = "SELECT max(tekstindex), max(volgnummer) FROM menu"

I want to select max(tekstindex) as 'tekst' and max(volgnummer) as 'volg'.

View Replies View Related

Select

I have a select statement that searches for certain records within a date range entered through a form. what i need to do on another page is count how many records they are and split them into each day within that date range. My original select query is:
Code:


objRSError.Source = "SELECT TOP 100 PERCENT TrapPage, TrapLine, COUNT(TrapID) AS ErrorVol, TrapDescription, TrapASPDescription, TrapCategory FROM dbo.tblErrorTraps WHERE (TrapTime >= CONVERT(DATETIME, '" & objRSError__strFrom & "', 103)) AND (TrapTime <= CONVERT(DATETIME, '" & objRSError__strTo & "', 103))GROUP BY TrapPage, TrapLine, TrapDescription, TrapASPDescription, TrapCategory ORDER BY COUNT(TrapID) DESC"

View Replies View Related

Select

For instance i do write out such which works.Code:

SELECT TOP 5 * FROM table4 order by id desc

Now how would i select the rest of the records without the first 5.

View Replies View Related

Two Select

I have problem, i'm starting using asp and DB

I have query

sSQL = " SELECT count(*) cc FROM ... " &_
" SELECT count(*) ff FROM ... "

Set oRS = oConn.Execute(sSQL)

First count i can get from oRS.("cc")

How to get "ff"?

View Replies View Related

SELECT AND DML

I have an ASP application.Is it right that I am calling all SELECT's AND DML's through stored procedures and in the ASP page I just call the stored procedure.

I am NOT using COM,i.e.I am not calling the procedures through DLL's but directly through ASP as time does not permit me to add this layer.

tell me is this right and is this a common practise followed i.e.calling stored procedures directly thru ASP without COM.Also,what is the main benifit of using SP than dynamic queries as there are plenty of suggestions dont know what is the conclusion.

View Replies View Related

SELECT TOP 10

how to filter top 10 records from the recordset. In Access I could use "SELECT TOP 10..." but in ASP it doesn't work.

View Replies View Related

Select On Day

I have a database containing information in different fields one of those fields is a datetime field, i want to select everything from that table where the datetime field is a monday or tuesday etc.

View Replies View Related

Select ID

if the user select the EmployeeID in drop down list, and then click the submit button, and it will look up database and show the Employee Name in the text box, this is easy.

But my case is: when the user select the employeeid in drop down list, it willfire the onchange event, and then look up database and show the employee name in the text box. There is no submit button.

View Replies View Related

Select

I have a form that contains text fields, text areas and select/lists. The form.asp gets sent through: <form method="POST" action="Confirm.asp"> When I receive the completed form it contains submitted info from all of the text fields ie: CompanyName=Request.form("companyName"), but the responses in the 'select' fields are empty.

Do the select (drop down list) fields need to be coded differently than text fields in order for the response to get posted back to me?

View Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved