I have a site where I need to compare the current date with the clients wedding date. (ie: 3/09/2005 with a wedding date like 6/15/2006) Here is what I'm using now.
CIExpires = DateDiff("d",CurrentDate,WeddingDate)
It will give me either a positive or negative number. I then just use this to either show or hide a link.
If CIExpires <= 0 Then
'don't show link
Else
'show link
end If
What is the best way to do this? The one above just doesn't work.
i am trying to get a piece of code that will check a value and then act accordinly - the usual thing with a For loop enclosing IF THEN ELSE loops - heres what i have Code:
FOR removecounter = 1 to 15 IF removecounter = Session("newoptions") THEN response.write "THEY ARE THE SAME - NOTHING TO CHANGE<br />" ELSE IF removecounter < Session("newoptions") THEN response.write " NOTHING TO CHANGE <br />" ELSE ' the only other thing it can be is > Session("newoptions") response.write "BLANKING THE UNUSED<br /> " END IF END IF NEXT
the Session("newoptions") is a value between 1 and 15 - i simply dont understand why this thing doesnt work
I am doing a scheduling system. The concept i have but i am weak in my programming, therefore i hope that u all can help me on this.
i have a capacity (uph x shift x 7.17) and orderperday (total orderqty per month / total shift per month)
the thing that i am not sure in is, i want to do a comparison it is becoz there is a capacity limit per day. i cannot afford 2 produce overlimit. so if the orderperday > capacity then orderperday - capacity = balance. balance will be bring forward to the next day to produce. then the comparison will be done again. i am not certain on how to do the looping in this context.
I am creating a website that is going to ask the user to enter a date! then from an access database get all records where a date field is greater then the date entered! Sounds simple, I do it in vb all the time!
here is my sql line: Select * From Participants WHERE DateJoined > 01/14/07 ORDER BY TournamentID
it updates fine with the date the user has entered! I know in vb I need to put ## around the date I am comparing! I tried that, I tried %%. still I am getting all records from the database
I need to compare an IP address to a database that contains ranges for each byte in a potentially "valid" IP.
Columns in the msSQL db are IP1, IP2, IP3 and IP4.
The problem is that one entry in the database may have a range. If I were to query all four columns and concatenate the data, I may get something like this:
12.35.124.12-89
So if a user sends me 4 variables (1 for each byte in IPv4) over a form, how I would I begin to compare this data?
I have problem regarding the Dates. I am storing Expiry date of the item in DB as varchar since I want date to display in the format MM/DD/YYYY HH:MM.
From user I am taking expiry date in dd/mm/yy hh/mm format and then using toLocaleString() function to convert it into string to store in Database. This function stores date in the format
Sunday, May 1, 2005 10:00:00 AM.
Now at the time of displaying items I am comparing this date to current date. I want to display items which has Expiry Date greater than today�s date. But it is not giving proper result. It is showing items whose expiry date is previous than today�s date. So not showing the desired result.
Just wanna ask if any1 noes the method to compare between current date(today) with other date and state out the difference of days in between? and also for current date(today) is it date()?
My name is Abhishek. I am writing a code in ASP which wants to access all records from SQL Server database where date lies between 11/24/2004 and 12/20/2004.DateVal is a field in custdate table.Can u reply me ASAP i.e. within 2 hours.
I am writing a script that allows a user to edit one record and its fields in a MSSQL database. For the time being I don't mess with the data, I just display what the script thinks should be updated.
Output is below.
Field name => Original Value = New Value submitted by user
If the 2 variables after comparsion return true, then the statement: This file had been inserted already will be displayed! but currently, there is nothing shown when i execute
I'm comparing a date held in a string with a date held in an access database using an SQL query. However despite tests in which the string and the date held in the database are exactly the same, no matches are found.
Here is my SQL query:
SELECT id, TimesheetDate FROM Timesheets WHERE TimesheetDate=VarDate
The format of the date in the database and the format of the string are exactly the same.
I understand this is because the VarDate variable is a string and not comparable so how do translate the string into a date format the database can make a comparison with? I've tried using CDate() with no luck.
I'm looping through database results where I have a date time field in the format: 9/2/2007 6:28:53 AM. What I'm trying to do is flag entries that are within the next 12 and 24 hours with a different color. I'm doing this currently with a counter field on another project like this:
PMCOLOR = "#000000" If cLng(rs("target_current_value")) > cLng(rs("target_value"))- 2800 Then PMCOLOR = "#FF0000" End If If cLng(rs("target_current_value")) > cLng(rs("target_value"))- 1400 Then PMCOLOR = "#FF9900" End If
This turns the line red if the current value is within 1400 of target and orange if its within 2800 of target. I want to do exactly the same thing with the date/time field flagging entries red if they are within 12 hours of the current time/date and flagging them orange if they are within 24 hours of current date/time.
I'm not sure how to break down the time and date and compare them to the current time and date, though. Its easy with integers.
I had a script set up to create a redirect until a certain date, and I left the script in there after that date thinking it would just be dormant until I changed the date parameters. To my surprise, it started redirecting again. I must not be clear on how dates work. Here is the very simple code:
<% if date < "8/20/2005" then response.redirect(url) end if %>
I want my website to support multi-lingua, so I add Codepage="65001" in my english website. However, after adding that, all the string comparison failed (login page, catcha). I thought I only need to add codepage, then my website will become multi-lingua site Did I miss something?
I am doing a date comparising. Is it possible to compare a selected date with current date which call from date function in VBScript. If can please show me the coding or reference or source online. Or you all have any idea on it?
I am back with another question. I need to have the user input two dates for a date range--thats easy! But now I would like to pull all the files up in a directory that are within that date range. I don't know how to do a comparison on dates.
I already have a working script with a loop pulling up all the files in a directory based on one date entered and listing them ---now I want to make it pull up all the files within this date range---just need to know you can do a date comparison in asp.
I am trying to pick up records from a date range without much luck. For my example below I am trying to pick up all records made in the last month. However none are being found (my code is tried and tested for all records). My database is in Access format. Field "datetime1" is of Date/Time data type getting the default value by using now()
The relevant part of my code is as follows. Can anyone see what I'm doing wrong?
I have looked all over the net and even down the back of the sofa but I've been unable to find any scripts that allow me to add price comparison functionality to my shopping cart. where a script might be or even offer some pointers as to how I might go about doing this.
First off, this is not the standard problem that can be solved by using:
SELECT * FROM table WHERE string LIKE '%abcd%'
It's actually sort of the opposite of that. I'm looking for a query that can take a string variable and will return only rows where the complete string in the relevant column is a string of the variable passed to the query. So for instance, if the variable passed was 'abcd' then...
rows containing only these strings in the relevant column would be returned:
'abcd'
rows containing these strings in the relevant column would NOT be returned: 'abcdefg' 'abcdxyz' 'abcd1234' 'abcde' 'af' 'hijk'
sql3 = "SELECT DISTINCT State FROM Property Where TypeID = '" & srch_cat & "'"
In the database, is a field called expiredDate I am trying to show only records whose expiredDates are greater than todays date, but I am messing up somewhere. The values in the fields are as this: 3/7/03 (or something like that...no time is added to it)
I'm using DW MX 2004 to build an asp based eStore. I have a checkout page created with both the billing and shipping information in the same form. I'd like to add some code and a button to activate it to copy the code to the shipping info (but it can't submit form). Also the State choice is a drop down list based on a recordset. There are other behaviors attached.
Dreamweaver created code to update to data base. But when testing on website i get the following message. I have no clue what it might be. Microsoft JET Database Engine error '80040e14' Syntax error in UPDATE statement. /admin/update.asp, line 111 line 11 is strName.execute I read it might be forbiden characters in the data base field names or spaces... but i don't have that. the names are userName, userLevel, ID, Password.
This seems a very complicated task, so I welcome any input. My boss wants a data grid or matrix of the top 6 orders with ordered items, and products, for a particular customer and he wants to see it like this:
products down the left side orders across the top number of items under the respective order number column across from the corresponding product.
I hope that makes sense. I have three tables. Products, Orders, Orderitems. I don't even know where to start. Many thanks in advance for any input offered.
how do i get data from a user on one page and display the result on the other page actually i have written a prgoram that displays a set of checkboxes and based on the checkboxes selected the related data is displayed .but the problem is the data is displayed on the same page below the list of check boxes. Code:
I have a form that has the option to upload a file at the bottom. If you select a file it works fine but if you leave file selection blank the forms bombs. This is not how I want it to work. On the form you need to use ENCTYPE="multipart/form-data" in the form tag.
On the processing page I need to use Set to assign a variable to the form data. I tried using IF on the variable assigned to the file path but it bombs out telling me "This function is not supported". Is there any other way I can check to see if curQes has a value assigned to it?
How can I display data from an XML file in ASP?I want to use an XML file instead of an Access or SQL database and would like to display this information the same as I would if I were using Access or SQL as the datasource.
