Problem With Writing/reading Text File
Here is what I have setup:
- a form that updates a text file.
- for example, in the form I have two fields, title and story. then, this write to a textfile (i.e. theinfo.asp). the update.asp file looks like this:
TSO.write "<%" & vbCrLf
TSO.write "title = """
TSO.write Request.Form("title")
TSO.write """" & vbCrLf
TSO.write "story = """
TSO.write Request.Form("story")
TSO.write """" & vbCrLf
- so, essentially it is creating an asp file with two variables.
- this works fine, it updates the file and i can call these variables in other pages. however, when i call these variables into a form : old versions of the variables populate the form: Code:
View Replies
ADVERTISEMENT
i had a vbscript that will read the text file from the bottom to the top, and after reading the file, it will be displayed in the screen, and the code look like this:
PHP Code: Code:
View Replies
View Related
I have prepared a mail merge application in VB. Now i want the same to convert to ASP. how to go about it. I mean what class need to be used for that.
View Replies
View Related
I am new to working with ASP and I would like to know
the code to create a textfile on the serer and then write
something in it using ASP.
View Replies
View Related
I'm writing data from an access db to a text file then emailing the text file. Everything works fine but it needs to tab deliminated. Can some one post the code for a "tab"?
View Replies
View Related
how to write (String data) to a text file from an ASP page?
View Replies
View Related
Can this be done? For example, in the line below. There may not always be a & objRS("ShippingAddress2") and I'm wondering if there is a way to use an if/then in there some how. If there is no data in that field then I need to pass over this part completely & objRS("ShippingAddress2") & "|"
I'l have several instances where I need to do this Code:
fname.WriteLine("hd2|" & objRS("ShippingName") & "|" & objRS("ShippingAddress") & "|" & objRS("ShippingAddress2") & "|")
View Replies
View Related
i found this piece of code from a site and it claims that you could create a text file into directory "c:test.txt" and writes the line Hello world in it. Code:
View Replies
View Related
I have the following file whatnew.txt on my server! It consists of lines each line hase 3 items seperated by commas like this:
item1,item2,item3
item12,item22,item32
...
...
I need the code to add new items to this file using the browser!
View Replies
View Related
I would like to know how I could accomplish this without using DB. There's a long text file named "TEST.TXT" The TEST file contains special character 'º' which will be used as pagebreak. I want an ASP page that will read the TEST.TXT file and split it into multiple web pages with navigation control. (eg. <FIRST<PREVIOUS>
<NEXT<LAST)
If it is possible
View Replies
View Related
I have a form that updates a text file. This text file writes variables (i.e. username = tom). This file is used to preview an HTML page and when you go to the form the variables are populated into the form fields again.
For some reason when someone else modifies the text file (using the form) I only see the old contents in the form fields. When I look at the preview HTML file, however, everything is fine.Why doesn't the form re-populate with the new info?
View Replies
View Related
i have a variable 'user', and a text file 'users.txt'. how can i search the text file and select the line thats the same as the variable 'user', then put that line into a variable?
'user' = 'root'
'users.txt' =
testuser1|kfkfjd
root|18273
test2|fjfkds
View Replies
View Related
I need to create something that will read a text file and send e-mail statements from that text file. I know this is a basic application, but I am not sure where to start with this. The text file already contains all of the information for the statements. It is one file that starts with the customer e-mail address and then separates each statement by an <eob> marker. I need to be able to browse to upload the file and then have the application cycle through and generate all of the e-mails. I don't need to do any formatting to the text file, just read it and send the e-mails. The server currently uses CDOSYS to send other e-mails from a shopping cart application.
View Replies
View Related
I have some messages in a text file.I would like to read one message every day from the text file. My Text file looks something like this
If you take medication for your blood pressure, you may need to be wary of adding certain pain relievers to your system. A class of pain-relieving anti-inflammatory medication often used to treat arthritis may interfere with a common blood pressure medication, according to research. The hash is just for demarcation. As I havent worked much with FileSystem can anyone help me how to go about acheiving the same.
View Replies
View Related
I'm having a hard time to open/write to a txt file from a .asp, the code is right, but, looks that the iis 5.0 is messing with the file system.
once the execution gets to the point of :
Set filetxt = filesys.OpenTextFile(sFilePathAndName, ForReading, False)
the browser just hangs forever, If I do the request to the same .asp several times then the IIS hangs, and can not even stop the service(a bug in IIS). Code:
View Replies
View Related
I need to read a simple txt file where there are some variables. I've done
this a lot of times but in this case I have something different: the text
file is located at an ftp server.
The FTP server has anynomous access.
Anyone know how can I do this?
View Replies
View Related
I get a CD from O2 containing call data.I want to read the txt file on the CD and use the content of the textfile in an asp file to import to the database.But how do i read the file?
View Replies
View Related
I have an application which was successfully writing data from submitted forms to a text file in a directory - in this case:
/data/findata.txt
This was fine because the forms lived at the root level with this directory.
Since then I have added enabled the forms to be used on subdirectories :
/subdirectory/myform.asp
I've used the same code for server.mapparth("data") etc - but instead of locating the directory at the root of the server called "data" it looks to the current directory- doesn't find it and creates another! eek!
What I need is a way to say "right, it doesnt matter what level you are at at the moment, always look at the root level /data directory"...
This has to be fairly dynamic - on the development server here its got a different file structure than on the live server (ie, it lives another level down again on the physical drive)...
Anyone got a good idea on how to look back up?
I do have one way to test which level they are at - but I feel that its a bit 'weak' - I have an ID that tells me if they are working on the upper or lower levels (ie, anything other than 1 is a lower level) - whilst I realise I could use this in the test I'm not sure if its going to be 100% fool proof to base this criteria on this ID.
Therefore I was hoping for a better way using the server.mappath etc...
View Replies
View Related
I'm having a hard time to open/write to a txt file from a .asp, the code is right, but, looks that the iis 5.0 is messing with the file system.
once the execution gets to the point of:
Set filetxt = filesys.OpenTextFile(sFilePathAndName, ForReading, False)
the browser just hangs forever, If I do the request to the same .asp several times then the IIS hangs, and can not even stop the service(a bug in IIS).
I'm running w2k pro, w/IIS 5.0
Here is the code:
View Replies
View Related
Does anyone know if it's possible to write and retrieve variables from a text file??
I know how to use the FSO to create text files and write data to them etc. I just don't know how to write a variable to a text file, and retrieve it at a later date??
I would like similar functionality to a cookie. The reason I can't just use a normal cookie is because the data needs to be permanent and I can't risk the cookies being removed off a users machine.
View Replies
View Related
the source code is:
<%
Set fso = CreateObject("Scripting.FileSystemObject")
Set a = fso.OpenTextFile(Server.MapPath("") & "/learn.txt")
mystring=a.readAll
Response.Write ("<pre>" & mystring & "</pre>")
Set a = Nothing
Set fso = Nothing
%>
The output is:
abc
ABC
i don't understand this:
Set fso = CreateObject("Scripting.FileSystemObject")
Set a = fso.OpenTextFile(Server.MapPath("") & "/learn.txt")
what should be insect in ("Scripting.FileSystemObject")?
and what should be insect in (Server.MapPath("") & "/learn.txt") ?
View Replies
View Related
I have to make a site search function for my website. User types a keyword, and the search function searches through all the static pages for the keyword. The result of the search has to display the URL relating to the keyword, which the user can click to read the contents.
I had no idea how to go about doing it, finally I thought of using a textfile containing the word, and its related URL in the format: Code:
View Replies
View Related
I'm looping through the source code of an HTML page, looking for links, grabbing the source of those links and saving each one in turn to an HTML page on disk.
This is working fine about 70% of the time, but sometimes it falls over when I try to write the source code as a text file to disk: Code:
View Replies
View Related
In ASP, using PerlScript, how do you read and write to files?
View Replies
View Related
I Would like to know the code for reading/writng binary data.
View Replies
View Related
I'm planning a little asp prog that will allow me to read&write .ini files.
meaning, read lines that are:
key=value
and maybe even read from groups (optional):
[group 1]
key1=value1
[group 2]
key2=value2
View Replies
View Related
how to write a text file to a mapped drive or network drive. In my script, I’m currently writing the text file to a local folder on the server temporarily until I can figure this out.
So far I have tried to use the mapped drive letter, network path, etc. to get this working. I believe all the permissions are in order (I hope) as well. No matter what I have tried, I just get a Path Not Found script error. I know this has to be possible, just I’m missing something … probably something right under my nose but I just can’t figure it out.
View Replies
View Related
I found the complete physical path to the doman by Response.Write Server.MapPath(".") and the path is: C:Inetpubwwwrootmyweb"&"gg.txt
With this,there's still error to read my text file.The error source code is place at below,please help me do correction!!! Code:
View Replies
View Related
I am looking for a system that will:
1. Read a message from a POP3 mailbox
2. Parse the message into its parts
3. Create a record in an SQL server table with selected fields of the message
4. Upload the attachements to the filesystem
5. Write the path of the attachements to the SQL server record
For security reasons, I want the process to be initiated and approved
by a user.
View Replies
View Related
is there any component to make it.. i want to make user registiration page..
in this page i want to place a image which has a text and a user must be
type this text to a text box and after that i will check the textbox value
and image text value.. how can i make it.. do i need a component. if there
is a component what is its name .. and i need a free one...
View Replies
View Related
I would like to dynamically add a text as a watermark on images.
I managed to do that with aspsmartimage but as the watermark is added
when the image is sent to the browser, it takes too much ressources on
the server, due to a big number of images to diplay simultaneously.
Is there a way or an other component to do that more efficiently. I
can't add the watermark when uploading the file because it has to be
written when the image is displayed.
View Replies
View Related
I'm writing a script lately to write some records into a text file for backup purpose. But may i know do asp allow update for the text file? Cause i dun want it to overwrite my previous records.
View Replies
View Related
I have the below code found on an ASP site.
<%
arrName = Split(Request("TextArea"),",")
%>
<%
For i = LBound(arrName) To UBound(arrName)
Response.Write "ID: " & arrName(i) & "<br>"
Next
%>
I'm using a TextArea box to submit the following...
A123,1
B123,2
C123,3
Results are...
ID: A123
ID: 1 B123
ID: 2 C123
ID: 3
I expected something like...
A123 1
B123 2
C123 3
For the sake of understanding, why are the results like above?
In the end, I want to insert these values into a table.
A123 into Field1 .... 1 into Field2
B123 into Field1 .... 2 into Field2
C123 into Field1 .... 3 into Field2
Where do I start?
View Replies
View Related