I'm using the following:
priceDelivered = Round(((totalMaterialPrice + rateWithHandling) / sqFtAmt),2)
It works great except for when it ends in 0, like $4.80. It only prints $4.8.
How can I make sure that even when these numbers end in 0 it shows 2 decimal places?
I want to round numbers to include a 0 at the end.
response.write "<td bgcolor=white align=center class=menuText>" & 100 - Round(CTASCAvail,2) & "%</td>"
response.write "<td bgcolor=white align=center class=menuText>" & 100 - Round(Avail,2) & "%</td>"
the following code will round the numbers 2 decimal places but if it is a 0 it will not display it.
how to round off numbers i have tried 2 different ways but hitting the dead end. say for example the number stored in my variable is
strnum="112"
i want to round it to 115 so my new value will be strnum="115" . so if its 113 it should be rounded to 115 . if its 116 or 117 or 118 or 119 it should be 120 . if its 111 or 112 or 113 it should be 115 . how i can round the numbers.
i am stuck on rounding i have a variable which holds a number like this
a=234.56789
and i want to display only
234
so i did like this
a=Formatnumber(a)
and output is
234.56
but i only need 234
I have the following html with result set. I like to have gas_revenue
display like $99,9999 and I like to have gas_price dsplay like 9.99.
Can I use html to accomplish this?
<td align="right"><Font
class=content4><%=ars.Fields("GAS_REVENUE")%></td>
<td align="right"><Font class=content4><%=ars.Fields("GAS_PRICE")%></td>
how to format every number on one page with one line of code? I need them changed in currency.example
12000 = $12,000
1000000 = $1,000,000
I'm working on asp project, access 2000 at backend.I can write arabic text and arabic
numbers in textbox and save them in database.but if i see these records, arabic text and arabic numbers,it is ok,if my computer is arabicenable.
If my computer is not arabic enable then it show arabic number into english numbers.
how can i show arabic numbers instead of english numbers if my computer is not arabic
enable.i'm working on a project i have to complete it.How can i convert english numbers that are coming from database and convert that numbers in arabic for show.
I have use
<meta http-equiv="Content-Type" content="text/html; charset=windows-1256">
I shall be very thankful to you for this purpose.
I have the following equation.
<% varWT = Round(CInt((rsFreePack.Fields.Item("Weight").Value)) +
CInt(Session("w"))) %>
Assume....
Round(CInt((rsFreePack.Fields.Item("Weight").Value)) = .12
CInt(Session("w")) = 30
How can I get it to always ROUND up to 31 ...?
I have a number with a decimal point that i always want to round upwards to the nearest whole number.Now i can use the round(No.) function and this works for any value of .5 and above the problem is the lower .1 .2 .3 .4.So an example
if i get the number 14.2 i want the output to be 15
11.3 = 12
13.8 = 14
If I have a value that is 53.123499999, how can I round it to 53.12?
View Replies View RelatedI have a variable (ex. 5.66666666) and I want to round it to 2 decimal places. Anyone got this code?
View Replies View RelatedI've created a freight calculator that needs to know how many pallets I'm shipping. I'm using 1 pallet for 750lbs and an extra pallet for anything more than that.
If materialWeight <= 750 Then numPallets = 1 Else numPallets = Round(materialWeight / 750) End If
Now, let's say the materialWeight/750 ends up being 3.2. This is returning 3, but I need it to return 4 since we need an extra pallet.
How can I make it Round up to the next whole number? If it turned out to be an exact number without a decimal then it should stay where it is, but if it's over x.0 at all it should go up to the next whole number.
I'm working on finishing a project the was started by someone else who no longer works here. Its an asp page that takes a whack of numbers form a db, and makes em look all pretty in tables. (its a remake of an excel spreadsheet)
the problem is some of the numbers are not apearing properly. I'm thinking it's because they used Round() sometimes and formatNumber() other times.
the question is... do these functions handle numbers differently? i know formatNumber can do more then just round but i just need it to make the numbers 1 or 2 decimals.
Does anyone know how I could round the minutes to the nearest 15 minutes, I'm using this
%=minute(now()) %>
Given: total = 18.01
I use FormatNumber(total,2), it give me 18.01
I use FormatNumber(total,0) it give me 18
I wanna to get 19, how should i do the code?? if there is any decimal
value, i wanna round it up to the next whole number.
I am dividing a value by two .. what i need is to round the number up if it is not a whole number.
View Replies View Relatedi have a very simple question which is driving me nuts. Using the ASP function Round():
Why do BOTH Round(1.775, 2) and Round(1.785, 2) both give the exact same result of 1.78 ?
Surely they should give different results, 1.78 and 1.79 respectively.
for eg x = 3.14. I want to do a round up to 1 decimal. if I were to use round(3.14) , I will get 3.1 , however I want to round up , expecting to get 3.2 .
View Replies View RelatedIn ASP, how do I do this?
Like 1.5 ---> 2
1.001 ---> 2
4.3---> 5
5.0001---> 6
How can I round the value to the nearest whole number. I have searched on math.round but
can not get it to function. Here is how I am getting the results if not division by zero. Code:
If I have a number that looks like 32.3, 15.5, 30.1 etc, I always assumed Price = Round(Price,2) is actually rounding a figure into a whole number or putting 32.30 etc.
So how do you exactly round the figure to whole number or put a zero at the end of it. I was thinking of formatNumber but I can't remember if there is a function for that?
I looped a record set to display and I found a strnage thing. as
Do While NOT rsBinAct.EOF
l_bin = rsBinAct.Fields("o_bin")
l_niin = rsBinAct.Fields("o_bin_niin")
l_b = LEFT(l_niin, 3)
l_n = RIGHT(l_niin, LEN(l_niin)-3 )
' display l_bin, l_b, l_n in a table-like page
rsBinAct.MoveNext
Loop
If I do not set the l_b and l_n to NULL then if the next l_niin is null value, I will get the l_n value of previous one only, l_b is still null. I wonder why.
I have the tables set up in Access, viewing in column format on ASP pages but now the company wants the schedule reports to be in a wall-calendar type format. I've searched and found calendar scripts but I need one that's creates a table resizable to a report size format. Using the existing MS Access db I've written is also a plus.
Any suggestions on where to start?
Good:
246/10 = 24.6
round(24.6) = 25
Bad:
246/100 = 2.46
round(2.46) = 2 (I want 3)
If I have a decimal, I want to round up. Always. How do I achieve this in ASP?
cart_calc_shipping_cost = (Rs.Fields("InitialCost")+(round((Weight/1000)+0.5)-1) * Rs.Fields("AdditionalCost"))
Seems to give me this error:
Microsoft VBScript runtime error '800a005e'
Invalid use of Null: 'round'
I think it is to do with the value of weight, however weight does have to be sometimes 0 so how can i fix this?
Is it possible to loop round all querystring parameters in a web page (i.e. access them without hardcoding them)?
I want to do this because I have a page that has different querystring variables passed into it depending on the content of the calling page.
We log hundreds of SQL injection attempts per day -- the type with
CAST(0x44004500... AS VARCHAR(4000)). It amuses me that the last thing the
attack does is DEALLOCATE its cursor. My SQL Server DBA tells me this makes
no difference. So...
Are these hackers cargo cultists? Or am I missing something?
if there any asp or vb functions that can convert any audio format files to vox format.
View Replies View Relatedhow to format date in MM/DD/YYYY format in ASP?
View Replies View RelatedJust started learning ASP about ten minutes ago.
Currently experimenting with forms.
could someone please tell me what is wrong with this code:Code:
<%
Resonse.Write Request.Form("myform") + Request.Form("myform2") & "<br />"
%>
Im trying to get two numbers to add together from a form.
I get this error when i use that code:
Quote: Microsoft VBScript runtime error '800a01a8'
Object required: ''
/Jaynesh/asptest.asp, line 14
how can i check if a variable is an even number
View Replies View Relatedi want to add two numbers in server script with VB script. how to do it.
View Replies View RelatedI Have this form in page1:
<form method="post" action="page2.asp">
<input type="checkbox" name="numb" value="10">
<input type="checkbox" name="numb" value="20">
<input type="checkbox" name="numb" value="30">
<input type="checkbox" name="numb" value="40">
</form>
Now what I want is to add the checked values in page2.
For example :
if checkbox1 and checkbox3 gets checked I want to add the values in the
checkboxes which in this case is 10 + 30 and get the total sum (40).
Hope this makes sense?
So how do I retrive the checked values and then add the checked values
with eachother to get the total?