Record Count Query
I'm trying to do a simple record count from my Access table but when it runs I keep getting a result of -1 when it should be over 50.
<%
set rsKaCon = Server.CreateObject("ADODB.Recordset")
rsKaCon.ActiveConnection = MM_jsb_stk_STRING
rsKaCon.Source = "SELECT * FROM USDSTOCK WHERE Modelcd = 'Fiesta' "
rsKaCon.Open()
rsKaCon_total = rsKaCon.RecordCount
%>
And the result should be Code:
View Replies
ADVERTISEMENT
How to find out recordcount from recordset
I have opened recordset with
set cn = Server.CreateObject("ADODB.Connection")
'Opening the connection
cn.Open "DSN=jms;"
set rs = server.createobject("ADODB.Recordset")
rs.cursortype=adopenstatic
Response.write rs.recordcount
it is giving -1
View Replies
View Related
I want to select the count from a table of a specidfc record. For example I have 10 records. One of the values in the 8th field is "Testnamere".I want do display 8. Testnamere Any suggestions?
View Replies
View Related
One way to count the record is;
strSQL = "Select COUNT(*) As RecTotal From SCHD_ADS"
TRecords1 = objCOnn.Execute(strSQL)
but what if I want to count the records of a recordset. Well objRS.Recordcount doesn't work in ASP. I don't know why. Any other idea?
View Replies
View Related
I got websites...which is its main function is to collect data from all my outlet trough out malaysia....the problem is how can shows the data which been key in a day...
View Replies
View Related
I have a question about looping in a recordset. I'm actually showing some actualities in a page, based on a start and end date. All is working well. My problem is that I put a <hr> between each news, but I don't want a <hr> at the end of the last news. I would like to count how many results I have in my recordset so I would be able not to show the last <hr>.
View Replies
View Related
I got websites. which is its main function is to collect data from all my outlet trough out malaysia. the problem is how can shows the data which been key in a day.
View Replies
View Related
I'm trying to use a SELECT query with COUNT.
I'm using the string retrieved from the text box to match the records held in the Db.
The query below returns this error: Data type mismatch...the line in question is the sql itself.
SELECT Count(Zipcodes.Zipcode) AS Zipcode FROM Zipcodes HAVING (((Count(Zipcodes.Zipcode))='" & strZipcode & "'))
View Replies
View Related
what i want to do is run a query that counts the number of records found e.g.Code:
Query = "Select * from dbo.tblTempInv where it_anal = 10 AND cost >= 50 AND MONTH(ih_invdate) = 1"
Set tempRS =MySQLConn.Execute(Query)
how do i display the result in asp? do i not use a recordset? or is there somthing im missing.
View Replies
View Related
I have 2 tables Table_A and Table_B are linked together by TaID
Table_A
TaID - autonumber
Name
Address
Table_B
TbID - autonumber
TaID
Comments
here is my asp page
-------------------------
<%@ Language="VBScript" %>
<!-- #include file="connectionstring.asp" -->
<%
'declare variables
DIM ......
'Assign Variables
.......
Set Conn = Server.CreateObject("ADODB.Connection")
'database connection
Conn.provider = provider
Conn.ConnectionString = dbasepath
Conn.Open
'Sql statement to insert the data
sql = "insert into Table_A ( Name, Address) values (...*data from form*...)
' execute it
Conn.Execute(sql)
Response.Write "Data successfully inserted!"
Conn.Close
Set Conn = Nothing
--------------------------------------------
my question is I also need to insert the data to Table_B, but before that, I want to retrieve the Table_A.TaID first.
so if i do "select TaID from Table_A" and execute the sql how do I assign just the LAST record of TaID and assign to temp variable?
Do I allow to do that? if so, where should I put in the code above?
View Replies
View Related
I have taken over a website that was done in Frontpage and I am trying to move away from it. I am having problems with page 1 where I have a link that passes a single value to page 2 in the query string.
On page 2 I want to use that value in the query string to produce mulitple record sets. This actually works when using the fpblib.inc. Is there a way of doing this without having to use Frontpage coding.
View Replies
View Related
I'm getting this error message: Error Type:
Microsoft JET Database Engine (0x80004005)
You cannot add or change a record because a related record is required in table 'employees'. Code:
View Replies
View Related
I have an insert record form that posts fine to a db which automatically creates an ID how could I get the next page to do a preview using the ID just created by the DB to go to the right record?
View Replies
View Related
I have a .asp page which lists a date, then a bunch of record lines for data that falls within that date, then the next date and it's bunch of data record lines. e.g.
Ship Date: 04/06/04
Data xxxxxxxxxxxxxxxxxxxxx
Data xxxxxxxxxxxxxxxxxxxxx
Data xxxxxxxxxxxxxxxxxxxxx
Data xxxxxxxxxxxxxxxxxxxxx
Ship Date: 11/07/04
Data xxxxxxxxxxxxxxxxxxxxx
Data xxxxxxxxxxxxxxxxxxxxx
Data xxxxxxxxxxxxxxxxxxxxx
What I want is:
Ship Date: 04/06/04
1: Data xxxxxxxxxxxxxxxxxxxxx
2: Data xxxxxxxxxxxxxxxxxxxxx
3: Data xxxxxxxxxxxxxxxxxxxxx
4: Data xxxxxxxxxxxxxxxxxxxxx
Ship Date: 11/07/04
1: Data xxxxxxxxxxxxxxxxxxxxx
2: Data xxxxxxxxxxxxxxxxxxxxx
3: Data xxxxxxxxxxxxxxxxxxxxx
How can I get these numbers printed againsts the records ?
View Replies
View Related
My code retrieves a username and a password from a form. Then this information is compared to some usernames and passwords that are stored in a database. The important thing here is that the comparison must be case sensitive meaning that "passWord" is not the same thing as "password"
I have this code, working fine in access 2003
SQL = "SELECT * FROM users WHERE StrComp(username_column,'" & entered_username_in_form & "',0) = 0 AND StrComp(password_column,'" & entered_password_in_form & "',0) = 0"
but get the following error when I run it against my sql 2005 database.
[Microsoft][SQL Native Client][SQL Server]'StrComp' is not a recognized built-in function name.
I don't know the corresponding t-sql for the query.
View Replies
View Related
I am running a querry on an access database and have set the number of records/page displayed at 20. if there are more than 20 records returned, then 1st page will show the first 20, the next page will show next 20 and so on....
The trouble:
the count of total records displayed is correct and the first page is displayed correctly. But when i click on *Next* to go to the next page, all the records of the database get displayed (not the 2nd page of records from the query).
View Replies
View Related
I am using ASP/MS ACCESS to see how I can query the same database, via 2 formfields.
{name: - search}Textfield 1: - Search by Category
AND/OR By
{name: - searchT}Textfield 2: - Location
Currently,
strSearchwords = Trim(Request.QueryString("search")); where "search" is the name of Textfield1
Which is fine, but how can I set it so that on Submit, the string from search, and searchT are somehow joined together into one string?
View Replies
View Related
I have a column n_fog defined as text. In this i have numbers or blank value in it.
For example i have 5 records
Record - number
1 - 2
2 - 2
3 - ''
4 - 3
5 - ''
What i want to know is get the total of the numbers. So it should give me 2+2+3 = 7
How can i do it?
View Replies
View Related
I have a link like this
<a href="/mainfolder/one.pdf"> view pdf
what i want to do is find out how many times the pdf was open
so a member logs on the website goes into member section on that page he sees a pdf i want to find out how many times did he click on the link and opened the pdf
i have a field in the table that will store the count value.
View Replies
View Related
For example take below as my array
myArray[0] = Bill
myArray[1] = Ben
myArray[2] = Ben
myArray[3] = Bill
myArray[4] = Ria
myArray[5] = John
myArray[6] = Gemma
myArray[7] = Gemma
myArray[8] = Bill
I want to be able to count the above and produce a list like so
Bill = 3
Ben = 2
Ria = 1
John = 1
Gemma = 2
View Replies
View Related
I have a problem with the below which I can't understand..
SQLcount ="SELECT COUNT(dates) AS total FROM dates"
Con.execute(SQLcount)
Response.Write total
And it doesn't return anything..
When I ask Isnull(total) the answer is "False".
So, if it has a value, why doesn't return it?
View Replies
View Related
What I want to do is count records in a table. if that count result is an
even number do something, if it is an odd number, do something else. sortof
like this.
set row_count = conn.execute("select count(clan_name) as cnt1 from clans")
clan_cnt = row_count.fields.item("cnt1").value
now this is the part i need
if clan_cnt " is odd" then
do something
else
do something else
end if
can someone shed some light on this for me please?
any help would be great, if even steering me in the right direction of some
site. would love to figure this out on my own, but just need a shove.
View Replies
View Related
I'm selecting a wide range of records. Some of these records may have duplicates in one value but some may not. I want to display the records as one and have a seperate display that counts how many there are WHERE the field is equal to a certain value. Code:
View Replies
View Related
I have to do this client side as well as server side
i have a field where a user can enter alpha numberic values
i want to count the integers or numbers seperately
can someone tell me how to do it
for example a user enters a3re4567
so there are 34567
so there are 5 integer or 5 numbers in that field
so i want to pop up an alert on client side.
View Replies
View Related
I m trying to use "select count" in order to retrieve the total number of a value in the database using the code below, but it doesn t seem to work. I get the following error mesage:
Error Type:
ADODB.Recordset (0x800A0CC1)
Item cannot be found in the collection corresponding to the requested name or ordinal.
i checked all the fields in the table, but i dont know if the syntax is wrong.
the code starts here--->
set rsTypes = con.execute("SELECT COUNT (cat) AS Total FROM firstmarch")
View Replies
View Related
i am trying to pull a count from the top 16 records in a db.
select count(top 16 (username)) as cnt2 from bracketdb_"&tourney_id&" where
username <'BYE' order by POS
this is what i need to do, however, it doesn't work. i am getting a systax
error near TOP.this is using SQLdb
View Replies
View Related
I have a Access database with two tables; a category table and an images table.In the Category table I have a field for Index number and a field for Categories. The images table has a field for all the images and a field to specify what category the images are assigned to.
I am trying to write a simple Select query that will return a list of Categories from my Category table, and in the second colum a count of the number of images assigned to each category from my main table of images.
View Replies
View Related
I'm using SQL/VBScript and need to get the number of records found in a DB search. I'm using. where I need it, but in this case, how would I access the info?
Code:
"SELECT COUNT(*) FROM Locations WHERE Location = 'Paris SBDC'"
How do I access the results? I'm really new to SQL and ASP, and the way I usually query a database is
Code:
set rs=objRecordset.Execute(sql)
and plug in
Code:
variable = <%rs.fields("fieldname")%>
View Replies
View Related
I'm having a little trouble trying to fix a little problem of mine. I have an SQL statement which counts all of the records of a certain type. Its fine up to here.
What I want to do is do a Count on a field where the value is > 0 and then do this for several fields in one SQL statement. how I may do it?
View Replies
View Related
how can i create a number that goes up by one everytime its goes throgh a loop. would it be like this:
dim numbercounter
numbercounter = 1
do while numbercount eof
numbercount +1
View Replies
View Related
How do i Count Records with "the same values"?
Name, Age, Sex
John, 20, M
Barry, 24, M
Eve, 19, F
How do i Count the Males and Females?
Like "There is currently 2 M and 1 F registered"
To count them all I would just use rsTable.RecordCount, but dont know how to Count them the way i want them to.
View Replies
View Related
Course_Info and Students. Course_Info holds all the information for each course that a student can sign up for. The Students table holds all of the student’s information. The field that ties the two tables together is Course_Name.
I have an admin page that I would like to display the total number of students enrolled for each class. How can I count the records in the Students table, and then display the total number of students that are enrolled in each individual classes?
View Replies
View Related
Is is possible to accurately count the number of characters in a Word document using ASP?
View Replies
View Related