Why does the error below occur whenever the statement Request.BinaryRead Request.TotalBytes) is executed for uploads larger than 100K? I thought the 100K limit applied only to Request.Form. This does not occur with smaller uploads. This is running on an IIS 6 server with full FP2002 extensions.
ERROR:
Request object error 'ASP 0104 : 80004005'
Operation not Allowed
With IIS 6 - ASP :
I try to upload a file of 125,000,000 bytes.
To do it, I use this code :
Request.BinaryRead(Request.TotalBytes)
I get this error :
Request object error 'ASP 0101 : 80004005'
Unexpected error
/test/test.asp, line 20
The function returned |.
I tried with multiple calls to Request.BinaryRead but with a lower amount of
bytes.
It Works BUT .... if you call Request.BinaryRead with a value lower than
67125217 it works, any values equal or above, I get the error described
before.
Sometimes when loading binary files with Request.BinaryRead IIS on the log gives me the following Error (I have analyzed IIS Log with Web Trend Analyzer and the error isn't frequent):
POST .../WZUpload.asp |59|ASP_0101_:_80004005|Unexpected_error...
I don't have information on the file inserted because it was inserted by other people (Web Candidates that inserts their curricula on our Web Site) I have tried with large files and I haven't reproduced the problem, i have tried with 0 bytes files and I haven't reproduced the problem, I have tried to insert into the upload file Low Value (Chr(0)) and I haven't reproduced the problem.... The instruction is so....
AllDataB = Request.BinaryRead(Request.TotalBytes)
What type of files can cause the crash of BinaryRead ?
I have a VBscript that I use to upload files onto the server. The script works fine on IIS 5.0 but on IIS 6.0 on Windows 2003 I get an error when uploading certain files.
I believe its because the file is larger than what is normally uploaded. Average file size is 15KB this file is 490Kb. The error that I get is
Request object error 'ASP 0104 : 80004005' Operation not Allowed
The code on the line is biData = Request.BinaryRead(Request.TotalBytes) Also the totalbytes on the two systems are different. Any idea why this is happening. Is there any solution?
Request.Form and Request.BinaryRead cannot be called after each other as it causes errors.
I need the BinaryRead and I also need to access other form values, but I cannot call them after one another. What do I do?
I have the below page which i use to add the information from a form to my MySQL database. It works perfectly fine when I don't add the code at the top for sending an email. Can someone be kind and have a look at my code and let me know where I am going wrong.
When I add the email code at the top the error I get is :
Error Type:
Request object, ASP 0206 (0x80004005)
Cannot call BinaryRead after using Request.Form collection.
/change_management/area/upload.asp, line 92
upload.asp I use for addding an attachment to the form ....
Under what circumstances can Request.BinaryRead() be useful & when should it be used?Assume that the value of Request.Form("anyvalue") is "a"(without the quotes). The output of
<%
Response.Write(Request.BinaryRead(10))
%>
is "??a" (again, without the quotes). How does ASP compute this value?
I'm struggling with an issue that many have seen, namely trying to upload a file using free file upload code that uses BinaryRead but getting the values using Request.Form. It doesn't work, isn't supposed to and I understand that.
My problem is that I don't know how to implement some of the workarounds I've seen. Does anybody know of a sample I could view.
Just trying to experiment with the Request.BinaryRead(count) method. What's wrong with this script?
<SCRIPT Language="VBScript" runat="server">
Dim b
b = Request.BinaryRead(Request.TotalBytes)
Dim Counter
If IsArray(b) Then
If Not IsEmpty(b) Then
Response.Write(LBound(b) & ", " & UBound(b))
'For Counter = LBound(b) To UBound(b)
'Response.Write(CStr(b(Counter)))
'Next
End If
End If
in my mail sending page i'm getting the following error
Cannot use Request.Form collection after calling BinaryRead.
can enyone explain y i'm getting that error
here's my coding where i get the error
str2 = split(Request.form("C1"),",")
i use the above code to get multiple checkbox values for getting the id's of the users to whom the mail should send
here the mail sending works as a loop while the attachemnt also attached to the mail
I've got a form handler that I'm useing to grade a test. The test contains some random questions pulled from a database. I'm wondering if there is a way with the request object, to get the name of the form element from the page with the form in addition to the information entered in the text box, or the value of the radio button clicked. I can get the value's from text boxes and the values of radio buttons selected, but I can't get the name of the form element. I've looked in the reference material I've got and Googled for an answer, but can't seem to find one.
View Replies View RelatedWhen you use the Post method in a form, it is stored in the Request Object. How long do those variables last?Example: User inputs some info in a textbox, presses a "Preview" submit button to preview their input before it is submitted. The form "Action" does some stuff with the user info, looks to see if they hit "Preview" or "Submit." Since they hit "Preview," it redirects them to another page to preview what the "Action" has done.
Does this third redirect page have access to the form info through the Request Object or has it disappeared by that point?
if I have a form that contains a line like this :
<input type="hidden" name="id">
The value for "id" is assigned in the form.If I want to access the information from a ASP form using Request, i would use "Request.Form("id"). what is the difference between Request.Form("id") and Request("id")?
The Request("id") works but I am wondering where it gets the information. When you don't specify the collection (as in Request("id) instead of Request.form("id) ) does it mean that the request will try to get the information from the URL, the cookie and the form?
i'm trying to display a name from a field value within a form using the following within an asp page called logpost.asp
<%
Dim strUname
strUname= Request.Form("TLFORM")
Response.Write strUname
%>
here are the form details
<form action="<%=TL_LOGIN_URL%>?ACTION=Login" method="post" name="TLFORM">
this isn't working though both files are in the same directory. anyone got any suggestions if poss or a work around?
I have this XMLHTTP request object. Which post and returns a variable value in the form of a query string from the server.
How do i read the value of the query string and assign it to a variable i want?
e.g if the querystring returns a value of results.asp?status=200
I would like to be able to assign the status value to a variable
Or if possible, does anyone know of a better script than the one below ? Because at times i get the error PERMISSION DENIED Code:
the internet explorer always give me some error
"
Object Required : Request
Code . 0"
"
on some ASP pages I try so look it up on the code, but I couldn't find anything wrong
FireFox and Opera could display the pages without any the error Does any knows what's wrong?
I'm trying some ASP script on my Windows XP professional.
I have installed the IIS and it's running fine. All the ASP pages are
running good except when there's a request involved, a submit button or
anything that loads another page such as using information from a form, a
radio buttons, or checkboxes. When I click on submit I get "The page cannot
be found".
Let's say I want to use the msxml object to call a web page from
within my script, and on the querystring or "in the header" of that
request I want to include a dictionary object, such that the called
.asp page can then request the object to it's script and use the
dictionary object.
Has anyone seen anything that describes marshaling an object into an
http request header?
Can You Put A Variable In A Request.Form Object I'm looking to do something like this:
variable = Request.Form(RS("ID"))
Is there a way to clear out the request.form collection, or the entire request object, for that matter?
I'm using server.transfer and this can be troublesome in cases where you need the request.form items to be reset.
Now my request.form object which gets the values of the answers gets them in wrong order and puts them in the database in the wrong order
is there a way i can set my order for accessing request.form object.
i m using the loop
for each x in request.form
next
becoz i dont know the values of x as they come from the database and can be anything. i also tried
value1 = rs("name") where name is a value in database
request.form(value1) which does not work.
In ASP, I’m using the following statement:
sTmp = " WHERE Sites.[Site Address] Like '" & Request("txtSiteAddress") & "'"
I’m constructing a SQL string getting the parameters from the URL that I built through a form.It works fine if it wasn’t for the jolly characters. If, for example, in my form I type %A% I can see it in the URL (I can see the % characters as well) but the ‘%’ character doesn’t get returned by the Request("txtSiteAddress").Does anybody know if there is a reason for this and a workaround?
I'm hoping someone can help me, I've searched the posts with limited results. I'm migrating an app to a win 2003 boxwith sp-1 and I get:
Server object error 'ASP 0228 : 80004005'
Server.Execute Error
/rock/userlogin.asp, line 60
The call to Server.Execute failed while loading the page.
The page code:
'Call procedure to display the page header
Server.Execute("/ASP_Procedures/PageHeader.asp")
I've tried giving rights of the IUSR account to the system directory, no luck. What can be causing this?
I have a serious problem with an application that was developed by a contracted coder. The application that was to go live today for the company. The developer that normally does the code work is in the States and I cannot get hold of him. I need to have this resolved. Can someone help me?
How do I fix this?
The error occurs on attempt to login to the application.
See below the error I receive when I attempt to login to the interface.
Response object error 'ASP 0156 : 80004005'
Header Error
/tram/admin/checklogin.asp, line 8
The HTTP headers are already written to the client browser. Any HTTP header modifications must be made before writing page content.
I'm completely lost as to what's causing this error on my browser. When i try to view my site with Internet Explorer my asp pages show nothing but the below error:
Session object error 'ASP 0102 : 80004005'
The problem is we are still getting orders and the tech support from our hosting company says he's not getting the error so it seems i'm the only one getting it, to make it stranger if i look at my site using Mozilla Firefox i don't get any error. This seems to conflict with the fact that asp is a server side script and so the browser shouldn't make any difference to asp errors but in my case it does?
What's stranger still is if i try to log into my sites Helm control panel i get a similar asp error but this time no matter what browser i use i get the same error and can't log in.
If anyone has any idea what could be causing this or more importantly what i can do to fix it I'd be very grateful to hear about it. I hadn't changed anything on my site or my browser when this error started appearing about 2 days ago and the tech support say if they aren't getting the error their end they can't fix it so I've no idea what to do.
The redirect page is giving error:
Response object error 'ASP 0156 : 80004005'
Header Error
/wheelofgod/pageing4.asp, line 76
The HTTP headers are already written to the client browser Any HTTP header modifications must be made before writing page content.
I was on here recently about error 500 messages (which I managed to sort by replacing the forum).However I am still getting error 500 messages with two sites. Both are trying to update information in the database. It displays info correctly, just doesn';t update. But everything is ok afaik and it works fine on my pws.
The errors are as follows (from different pages):
error type 1
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Operation must use an updateable query.
error type 2
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Cannot update. Database or object is read-only.
What is the difference between these two statements? They seem to do the
same thing...
response.write(request("variable"))
response.write(request.querystring("variable"))
I have a database driven (ms access) website which runs fine on my computer (win 2000 iis6). However, on uploading, some pages am receiving the following error
"An Unknown script error occured while processing your request."
......
i need 2 check the cooky in another page if itis exist the page reads its value and if not it redirect the browser to another page
i tried 2 use this but failed :
========================
fname=Request.Cookies("user")
if fname="" then
response.redirect "add.asp"
else
response.write("welcome " & fname)
end if
===================================
and when i write
fname=Request.Cookies("user")
response.write("welcome " & fname)
to just read the cooky it works good but when using if to redirect the page do not responde
when the asp page is Request("txtName").i can use "testpage.aspx?txtName=User1" to post the value.but when i use Request.Form("txtName").i cannot use that method,what can i do to solve that problem.(as i cannot modifty the request.form syntax but i need to post data to that web page, is there any method so that i can pass that parameter?)
View Replies View RelatedI saw some program using "request("fieldname") " instead of "request.QueryString" to get the value from URL, what's the different ?
View Replies View RelatedIt became clear to me that using a Request.Form object doesnt work after a Request.BinaryRead. I never had to deal with the BinaryRead Object Method, so this is quite new for me.
I'm using a script to upload files to my server (this script uses the Request.BinaryRead). Besides the file, users submit there name and a checkbox (if checked of course). I want to use the data submited by the user, but the Request.Form object doesnt work .how can i access the tekstfield and checkbox, if cant use the Request.Form object?The answer will be simple probably, but my searches on google didn't give me an answer.