Just trying to experiment with the Request.BinaryRead(count) method. What's wrong with this script?
<SCRIPT Language="VBScript" runat="server">
Dim b
b = Request.BinaryRead(Request.TotalBytes)
Dim Counter
If IsArray(b) Then
If Not IsEmpty(b) Then
Response.Write(LBound(b) & ", " & UBound(b))
'For Counter = LBound(b) To UBound(b)
'Response.Write(CStr(b(Counter)))
'Next
End If
End If
Why does the error below occur whenever the statement Request.BinaryRead Request.TotalBytes) is executed for uploads larger than 100K? I thought the 100K limit applied only to Request.Form. This does not occur with smaller uploads. This is running on an IIS 6 server with full FP2002 extensions.
ERROR:
Request object error 'ASP 0104 : 80004005'
Operation not Allowed
Request.Form and Request.BinaryRead cannot be called after each other as it causes errors.
I need the BinaryRead and I also need to access other form values, but I cannot call them after one another. What do I do?
Under what circumstances can Request.BinaryRead() be useful & when should it be used?Assume that the value of Request.Form("anyvalue") is "a"(without the quotes). The output of
<%
Response.Write(Request.BinaryRead(10))
%>
is "??a" (again, without the quotes). How does ASP compute this value?
I'm struggling with an issue that many have seen, namely trying to upload a file using free file upload code that uses BinaryRead but getting the values using Request.Form. It doesn't work, isn't supposed to and I understand that.
My problem is that I don't know how to implement some of the workarounds I've seen. Does anybody know of a sample I could view.
Sometimes when loading binary files with Request.BinaryRead IIS on the log gives me the following Error (I have analyzed IIS Log with Web Trend Analyzer and the error isn't frequent):
POST .../WZUpload.asp |59|ASP_0101_:_80004005|Unexpected_error...
I don't have information on the file inserted because it was inserted by other people (Web Candidates that inserts their curricula on our Web Site) I have tried with large files and I haven't reproduced the problem, i have tried with 0 bytes files and I haven't reproduced the problem, I have tried to insert into the upload file Low Value (Chr(0)) and I haven't reproduced the problem.... The instruction is so....
AllDataB = Request.BinaryRead(Request.TotalBytes)
What type of files can cause the crash of BinaryRead ?
I have a VBscript that I use to upload files onto the server. The script works fine on IIS 5.0 but on IIS 6.0 on Windows 2003 I get an error when uploading certain files.
I believe its because the file is larger than what is normally uploaded. Average file size is 15KB this file is 490Kb. The error that I get is
Request object error 'ASP 0104 : 80004005' Operation not Allowed
The code on the line is biData = Request.BinaryRead(Request.TotalBytes) Also the totalbytes on the two systems are different. Any idea why this is happening. Is there any solution?
in my mail sending page i'm getting the following error
Cannot use Request.Form collection after calling BinaryRead.
can enyone explain y i'm getting that error
here's my coding where i get the error
str2 = split(Request.form("C1"),",")
i use the above code to get multiple checkbox values for getting the id's of the users to whom the mail should send
here the mail sending works as a loop while the attachemnt also attached to the mail
With IIS 6 - ASP :
I try to upload a file of 125,000,000 bytes.
To do it, I use this code :
Request.BinaryRead(Request.TotalBytes)
I get this error :
Request object error 'ASP 0101 : 80004005'
Unexpected error
/test/test.asp, line 20
The function returned |.
I tried with multiple calls to Request.BinaryRead but with a lower amount of
bytes.
It Works BUT .... if you call Request.BinaryRead with a value lower than
67125217 it works, any values equal or above, I get the error described
before.
I have the below page which i use to add the information from a form to my MySQL database. It works perfectly fine when I don't add the code at the top for sending an email. Can someone be kind and have a look at my code and let me know where I am going wrong.
When I add the email code at the top the error I get is :
Error Type:
Request object, ASP 0206 (0x80004005)
Cannot call BinaryRead after using Request.Form collection.
/change_management/area/upload.asp, line 92
upload.asp I use for addding an attachment to the form ....
I've got the same page running
on two different machines. I do the same form post on both, and on one
machine I get Request.Form.Count=21 and on the other it's 22. ?!?
I have iterated through the form collection and printed out every key
on both machines and compared them carefully. They are identical.
WTF is going on here? I even went so far as to reset IIS on both
machines, and the counts are still different.
I am using Free ASP Upload (url is no spaces .net) and I want to be able to upload something, and save something to the database (so I can keep track of what is uploaded)
Now the uploading works smoothly, ZERO problems with that. the problem comes in when i try and write to the database, or more specifically, when i use "request.form" - i get the following error:
Request object error 'ASP 0207 : 80004005'
Cannot use Request.Form
/admin/uploadPictures.asp, line 164
Cannot use Request.Form collection after calling BinaryRead.
Do i need to close BinaryRead?
Just another quick one, the upload system im using obviously doesn't like request.form is there anything else i can use to pass the variable that wont give me the error shown below.
Request object error 'ASP 0206 : 80004005'
Cannot call BinaryRead
/mainstay.asp, line 34
Cannot call BinaryRead after using Request.Form collection.
I want to save string from BinaryRead()method, so i write a ASP code just like that!!
<%
dimbinRead
dimbyteCount
byteCount= Request.TotalBytes
binRead = Request.BinaryRead(byteCount)
Set objFSO = Server.CreateObject
("Scripting.FileSystemObject")
Set objTStream = objFSO.CreateTextFile("C:aaaa.txt", True)
objTStream.WriteLine binRead
Set obj = Nothing
%>
objTStream.WriteLine binRead <-- is it right?
when i open "C:aaaa.txt" there is no char! no string
what is wrong?
how can i save binary string?
It became clear to me that using a Request.Form object doesnt work after a Request.BinaryRead. I never had to deal with the BinaryRead Object Method, so this is quite new for me.
I'm using a script to upload files to my server (this script uses the Request.BinaryRead). Besides the file, users submit there name and a checkbox (if checked of course). I want to use the data submited by the user, but the Request.Form object doesnt work .how can i access the tekstfield and checkbox, if cant use the Request.Form object?The answer will be simple probably, but my searches on google didn't give me an answer.
I had an ASP page which implemented a file upload feature. However, after moving this application from NT4 to Windows 2003 I receive an error which is caused by the Request.BinaryRead read. The error says this operation in not allowed. I presume it will be an IIS setting, but not sure what.
View Replies View RelatedWhat is the difference between these two statements? They seem to do the
same thing...
response.write(request("variable"))
response.write(request.querystring("variable"))
when the asp page is Request("txtName").i can use "testpage.aspx?txtName=User1" to post the value.but when i use Request.Form("txtName").i cannot use that method,what can i do to solve that problem.(as i cannot modifty the request.form syntax but i need to post data to that web page, is there any method so that i can pass that parameter?)
View Replies View RelatedI saw some program using "request("fieldname") " instead of "request.QueryString" to get the value from URL, what's the different ?
View Replies View RelatedI have a column n_fog defined as text. In this i have numbers or blank value in it.
For example i have 5 records
Record - number
1 - 2
2 - 2
3 - ''
4 - 3
5 - ''
What i want to know is get the total of the numbers. So it should give me 2+2+3 = 7
How can i do it?
I have a link like this
<a href="/mainfolder/one.pdf"> view pdf
what i want to do is find out how many times the pdf was open
so a member logs on the website goes into member section on that page he sees a pdf i want to find out how many times did he click on the link and opened the pdf
i have a field in the table that will store the count value.
For example take below as my array
myArray[0] = Bill
myArray[1] = Ben
myArray[2] = Ben
myArray[3] = Bill
myArray[4] = Ria
myArray[5] = John
myArray[6] = Gemma
myArray[7] = Gemma
myArray[8] = Bill
I want to be able to count the above and produce a list like so
Bill = 3
Ben = 2
Ria = 1
John = 1
Gemma = 2
I have a problem with the below which I can't understand..
SQLcount ="SELECT COUNT(dates) AS total FROM dates"
Con.execute(SQLcount)
Response.Write total
And it doesn't return anything..
When I ask Isnull(total) the answer is "False".
So, if it has a value, why doesn't return it?
What I want to do is count records in a table. if that count result is an
even number do something, if it is an odd number, do something else. sortof
like this.
set row_count = conn.execute("select count(clan_name) as cnt1 from clans")
clan_cnt = row_count.fields.item("cnt1").value
now this is the part i need
if clan_cnt " is odd" then
do something
else
do something else
end if
can someone shed some light on this for me please?
any help would be great, if even steering me in the right direction of some
site. would love to figure this out on my own, but just need a shove.
I'm selecting a wide range of records. Some of these records may have duplicates in one value but some may not. I want to display the records as one and have a seperate display that counts how many there are WHERE the field is equal to a certain value. Code:
View Replies View RelatedI have to do this client side as well as server side
i have a field where a user can enter alpha numberic values
i want to count the integers or numbers seperately
can someone tell me how to do it
for example a user enters a3re4567
so there are 34567
so there are 5 integer or 5 numbers in that field
so i want to pop up an alert on client side.
I m trying to use "select count" in order to retrieve the total number of a value in the database using the code below, but it doesn t seem to work. I get the following error mesage:
Error Type:
ADODB.Recordset (0x800A0CC1)
Item cannot be found in the collection corresponding to the requested name or ordinal.
i checked all the fields in the table, but i dont know if the syntax is wrong.
the code starts here--->
set rsTypes = con.execute("SELECT COUNT (cat) AS Total FROM firstmarch")
i am trying to pull a count from the top 16 records in a db.
select count(top 16 (username)) as cnt2 from bracketdb_"&tourney_id&" where
username <'BYE' order by POS
this is what i need to do, however, it doesn't work. i am getting a systax
error near TOP.this is using SQLdb
I have a Access database with two tables; a category table and an images table.In the Category table I have a field for Index number and a field for Categories. The images table has a field for all the images and a field to specify what category the images are assigned to.
I am trying to write a simple Select query that will return a list of Categories from my Category table, and in the second colum a count of the number of images assigned to each category from my main table of images.
I'm using SQL/VBScript and need to get the number of records found in a DB search. I'm using. where I need it, but in this case, how would I access the info?
Code:
"SELECT COUNT(*) FROM Locations WHERE Location = 'Paris SBDC'"
How do I access the results? I'm really new to SQL and ASP, and the way I usually query a database is
Code:
set rs=objRecordset.Execute(sql)
and plug in
Code:
variable = <%rs.fields("fieldname")%>
I'm having a little trouble trying to fix a little problem of mine. I have an SQL statement which counts all of the records of a certain type. Its fine up to here.
What I want to do is do a Count on a field where the value is > 0 and then do this for several fields in one SQL statement. how I may do it?
how can i create a number that goes up by one everytime its goes throgh a loop. would it be like this:
dim numbercounter
numbercounter = 1
do while numbercount eof
numbercount +1
How do i Count Records with "the same values"?
Name, Age, Sex
John, 20, M
Barry, 24, M
Eve, 19, F
How do i Count the Males and Females?
Like "There is currently 2 M and 1 F registered"
To count them all I would just use rsTable.RecordCount, but dont know how to Count them the way i want them to.