Request.querystring
I have a problem! Lets see if i can explain it....
if the querystring referrerid = "" then the page crashes.
i.e.
.com/register.asp?referrerid=
so its blank.
If request.querystring("referrerid") = "" then
I tried using a redirect to the same page without the querystring but the code still picks this up as being <request.querystring("referrerid")= "" > and ends up looping.
I don't want to replace the "" with anything because a form box takes it information from there or a session("referrer") if the user has entered incorrect details in the registration and been returned to the same page.
Does that make enough sense for anyone to make any sense?
View Replies
ADVERTISEMENT
What is the difference between these two statements? They seem to do the
same thing...
response.write(request("variable"))
response.write(request.querystring("variable"))
View Replies
View Related
Trying to test if Querystring is empty. then display content based on that. Currently trying: Code:
<% if Request.QueryString("variable")="" then
response.write ("hello") End If %>
Basically I'm looking for a way to display certain content only on the main page when no variable has been set.
View Replies
View Related
slight problem (for newbie) giving error:
0x800A01B6: Object doesn't support this property or method: 'Request.QueryString.ID'
source of problem is line 6 (the bold one):
<%
Dim players__idd
players__idd = "1"
If (Request.QueryString.ID <> "") Then
players__idd = Request.QueryString.ID
End If
%>
i call the page using profile.asp?ID=1
View Replies
View Related
i m trying to pass a string valuewith a link:
like .............
response.write("<a href==teamemployee.asp?team=" & team & ">" & team & ">")
at the run time the value of team is "Admin & facilities" .
but when i read the value of team by using request.querystring("team")
. it returns only the value "Admin" .
but if the value of team is "Finance "
it returns the "Finance " .
Now , i think you can understand my problem that , request.querystring("team") is returing the value
before space . how to solve this problem .
View Replies
View Related
I have something like this in my form:
<select onchange='document.getElementById("iframe1").src="cities.asp?country="+ this.value'">
<option value='' selected>-----Select-----
<option value='Overnight'>Overnight
<option value='Email Special'>Email Special
<option value='Fax,Email,Pickup'>Fax,Email,Pickup
</select>
this goes to cities.asp and the value of country is passed over to the cities.asp
Now what i want to do is ..I need to pass on one more value in addition with the value of variable coutry being passed.
i want to forward Request.form("CompanName") too to cities.asp.
is this the right way of modifying the statement orCAN i do it this way by any chance?
<select onchange='document.getElementById("iframe1").src="cities.asp?country="+ this.value'&Companyname='<%"&Request.form("companyname")&"'%>">
Please advise?
View Replies
View Related
I use the Request.QueryString to pass variables from one page to another in ASP but my question is how can I pass a variable such as the one used in Request.QueryString from an ASP page to a XSL page?
View Replies
View Related
I want to open a text file using the following way. I get the file list. but I want to open the file . how can I do in order to transfer the "nm" variable between the asp
asp1: Code:
View Replies
View Related
I have the following line in my ASP code.
If UCase(Trim(CStr(oRset("Suburb"))))=UCase(Trim(CStr(Request.QueryString("link"))))
then
etc etc
end if
The problem is that although the Suburb and the link variables match often,it only works when the variable has been pulled from an Access database where I entered the data directly into Access through the Access interface.Where I have entered the data through the web interface, it ignores it as if it does not match.I have added CStr, Trim and Ucase to try to get it to see it as the same text but it still fails.Can anyone help. ASP 6.0 and Access 2003.
View Replies
View Related
i have a myspace account. of course now that i have been getting more and more into programming, i try and think about it when i use other sites and see how i would do it, or figure out how they did...whatever (I know, its wierd)
you can view a myspace members profile by going to myspace.com/username. now with my experience with the querystring is that you have a variable, and then a value. but here it looks like the variable might just be understood and the value is whatever is after the slash...or something like that.
View Replies
View Related
I am using a free ASP host and when i do a Request.QueryString it returns the value in lowercase.Has anybody experienced something similar before?Is there anyway around it?
View Replies
View Related
In my page (photo.asp) there are 2 iframes - thumb and large. The iframe Thumb has p.asp inside it and its content is dynamic depending on the querystring of the parent page i.e. photo.asp?i=7.My problem is I cant read the querystring of the parent page (photo.asp) from inside the iframe.
View Replies
View Related
I am doing a JMail and I want to include a hyperlink in the message. Now the URL is juz in the form of text and not hyperlink.The hyperlink need to make use of the request.querystring to obtain the id and email of the customer. How do I write that?
Code:
strsender = abc@abc.com
strreceiver = rsQuery("email")
id = int(rnd*9999)+1000
JMail.ContentType = "text/html"
JMail.Subject = "Test"
url= "http://email.asp?id=" & id & "&addr=" & strreceiver
JMail.body = url
JMail.Sender = strsender
JMail.AddRecipient strreceiver
View Replies
View Related
I am trying to get my shopping cart to get some variables back from a payment gateway. The end goal is to have it OK digital downloads when the 'order complete' message is sent from my payment provider. It's real simple at this testing phase, only two variables are present in the URL that the payment gateway is trying to send me: Code:
View Replies
View Related
How do i call a value from the URL is there is no name assigned to the value?
http://www.abcd.com/boston.asp
I want to retrieve the value boston and show my data for boston.
The next URL might be
http://www.abcd.com/newyork.asp
So I want a code that doesnt count from back since each city name length would be different.
View Replies
View Related
i m trying to pass a string valuewith a link
like .............
response.write("<a href==teamemployee.asp?team=" & team & ">" & team & ">")
at the run time the value of team is "Admin & facilities" .
but when i read the value of team by using request.querystring("team")
.
it returns only the value "Admin" .
but if the value of team is "Finance "
it returns the "Finance " .
Now , i think you can understand my problem that , request.querystring("team") is returing the value
before space .
how to solve this problem .
View Replies
View Related
I've encountered many problems upgrading my Win2K Server to Windows 2003
Server, not the least of which involve IIS 6.0 and ASP (classic) support.
For example...
I'm getting Event ID 2236: The server failed to load application
'/LM/W3SVC/87257621/Root'. The error was 'Could not read key from registry'.
Application Log entries whenever certain ASP code is executed. These are
ASP pages that ran fine for years under Win2K/IIS 5.0.
I can do Response.Write without a problem, but something as simple as
Request.QueryString("IsActive") yields the above event and a nasty error
'8002801d'.
Has anybody encountered this kind of difficulty with ASP on IIS 6.0? Does
anybody have a clue as to how to correct this behavior?
View Replies
View Related
My problem this time is that I am trying request some data in a database via a request.querystring passed from another page.
The table is called users, and the field firstname. The data being passed is called ID.
Below is my code.
View Replies
View Related
I want to load an asp page with a very great variable part (something like save.asp?myvariable=aa...zzzzz
I know the length of aa...zzzzz is limited to 255 characters. But I would like to be able to send a request of length, let say of 2500 characters.
View Replies
View Related
I had 4 pages with the folowing code:
Page 1
Code:
strSQL = "SELECT * from Directorio where sector='sector1'"
Page 2
Code:
strSQL = "SELECT * from Directorio where sector='sector2'"
Page 3
Code:
View Replies
View Related
I have a very big asp form with a lot of fields in it and I use the get action in the form.
I want to know, is there any limitation for the Request.Querystring or can be unlimited with lots of fileds in the form?
View Replies
View Related
Daft question I'm sure but is it possible to pass information to a page via the Request.Form AND Request.Querystring at the same time?
I.E If I have a form with several text boxes and the URL includes a variable will the page it's being passed to be able to gather the information from both sources? Code:
View Replies
View Related
I am passing 3 parameters and would like to get those values in my form and write it as a link in an e-mail that I am sending, not much luck lately, my Request.querystring syntax is sooooo wrong.
Example:
http://test.at/test/default.asp?kap=43&mod=ed&lang=de
In my default.asp:
<input name="this_page" value="http://test.at/test/default.pxml?kap=Request.QueryString("kap")&mod=Request.QueryString("mod")&lang=Request.QueryString("lang")" type="hidden">
View Replies
View Related
The following code opens a new asp page and passes the following parameters. value and phone have valid values.
_OpenWindow("../scrl_asp/cc_ins_entitlement.asp?company_id="+value+"&phone_id ="+phone)
Code:
View Replies
View Related
I saw some program using "request("fieldname") " instead of "request.QueryString" to get the value from URL, what's the different ?
View Replies
View Related
I am having my code in ASP. My application is a Unicode application. I need to get the Unicode data using Request.QueryString(). But it gives me output strings (?3047)with question mark in it instead of correct Unicode data. I have set @CODEPAGE=65001 and Response.Charset="UTF-8" in the beginning of the page.
This article says that Request.QueryString() does not work for Unicode data and when we are click in the unicode language link then it will give erro that ur query is erro .
Can anybody tell me how to get Unicode data?
View Replies
View Related
Can ASP retrieve UTF-8 encoded data in query string properly, when
used with IIS 5.0 on Windows 2000 Pro/Server?
With some trial and error, it seems that adding the directive
@CodePage = 65001 to an ASP page makes the ASP page decode UTF-8 data
in query string properly. Without the directive,
Request.QueryString(var) returns garbled data. With the directive,
Request.QueryString(var) decodes UTF-8 encoded data properly. (I tried
passing it to database with ADO; and VBScript function Len() also
returned the correct string length. I passed UTF-8 encoded Chinese
characters during my test.)
My search on the Web and newgroups, however, returned mostly results
that say ASP does not support UTF-8 encoded data in query string.
One of the search results is
http://www.microsoft.com/technet/pr...y/interasp.mspx.
It was written in March 2000. Could things have changed since then?
Can anyone share their views and experience on this matter? Is the
@CodePage directive all that's needed to handle UTF-8 encoded data in
QueryString?
View Replies
View Related
How do I get all walues if my querystring is empty?
If I have a table with let's say 10 rows/records, (ID 1-10). I then have a
recordset with request.querystring("id") and get the record having the id
thats shown in the address bar ("..com?id=4" would get the record with the
id 4). How do I get all records if the querystring is empty ("..com")
I have: Code:
View Replies
View Related
I'm working a user management system, and when I activate a user that
has registered to my system, the current admin user logged in gets
logged out.
I can't seem to work out how - I can't even trace back where some of
the variables are coming from (for example, the "ref" part of the
Request.QueryString method). Code:
View Replies
View Related
I need to pull values from another page to a form in my script. Basically i want to update an entry in my dbase and populate those current values to a form which is working fine for most of the form except the dropdownlist. Also i dont know if this is an issue but i have a "FOR" Script running in my dropdownlist constructed as follows:
<% For x = 0 to 1000%><option value="<%=x%>" selected="<%=Request.QueryString("CabN")%>"><%=x%></option><% Next%></Select>
As you can see i place the Request.Querystring object in my code but the dropdownlist doest recognise this and continues on until it reaches 1000 which at this point it stops. I want the drop downlist to reflect the same value as that which exsist already in the datebase for it. What am I doing wrong?
View Replies
View Related
I have a problem. I am having my code in ASP. My application is a Unicode application. I need to get the Unicode data using Request.QueryString().
But it gives me output strings (?3047)with question mark in it instead of correct Unicode data. I have set @CODEPAGE=65001 and Response.Charset="UTF-8" in the beginning of the page.
I went through the article:
http://www.microsoft.com/technet/prodtechnol/windows2000serv/technologies/iis/maintain/featusability/interasp.mspx
This article says that Request.QueryString() does not work for Unicode data.
Can anybody tell me how to get Unicode data?
View Replies
View Related
I can successfully get one field of information at a time and randomize it, but I need the whole string. I've been searching the internet trying to find an answer to this question and I found these two commands Request.querystring and Recordset.GetString, but I
don't think I know how to use them properly. Code:
View Replies
View Related
I use the following code to debug my pages and I wanted to make it conditional to only show parameters that contain a value. Is this possible? I tried several ways but I had no luck.
<% ' debugging code ******************************************************************************
FOR EACH QueryString_Parameter IN Request.QueryString
Response.Write(QueryString_Parameter & " " & "=" & " ")'this are the field names
Response.Write(Request.QueryString(QueryString_Parameter) & "<BR>")
NEXT
'debugging code ******************************************************************************
%>
View Replies
View Related
