Reserved Words In Microsoft Access
I've noticed several posts where people were having trouble accessing an Access Database. In the vast majority of these cases, the problem was the use of a Reserved Word as a database field name. The following are links to KB Articles listing Reserved Words for Access 97 and Access 2002:
Access 97: http://support.microsoft.com/kb/q109312/
Access 2002: http://support.microsoft.com/kb/q286335/
If you are having trouble with a SQL Statement, and you are fairly certain there is nothing wrong with your statement, check your field names against this list. Using Reserved Words as field names, while not prohibited, is never a good idea.
For example, if you have a field where you want to put someone's name, "Name" is a Reserved Word. A better choice would be something like "UserName" or "PatientsName"; something that identifies the field but doesn't use a Reserved Word.
View Replies
ADVERTISEMENT
[Microsoft][ODBC Microsoft Access Driver] Cannot update. Database or object is read-only.
I keep getting this error message when im adding a new record to my database.
Here is my code: ....
View Replies
View Related
i m trying to coneect to a access database Using DSN , but when i try to connect i get an error
Microsoft OLE DB Provider for ODBC Drivers error '8007000e'
[Microsoft][ODBC Microsoft Access Driver] System resource exceeded.
View Replies
View Related
I am trying to peform a multiple deletion of records from a single table "Stockist"
I i keep getting the following Error and can't see where i am going wrong. Can anyone help?
Microsoft OLE DB Provider for ODBC Driverserror '80040e10'
[Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 2.
/RetailerStockProductRemove.asp, line 22
The code i have used is as follows:
View Replies
View Related
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Not a valid bookmark.
has anybody seen such types of errors?
View Replies
View Related
this small bit of SQL:
SQL_EditNews = "INSERT INTO tblNews (newsBody) VALUES ('" & editedNews & "') WHERE newsID=63"
Is there something wrong with this statement? When i try to execute it, i get the following error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Missing semicolon ( ; ) at end of SQL statement.
/edit_news_03.asp, line 19
View Replies
View Related
I am urgently finding a set of codes to write data into a form and the data will go to my database. However i have tried a lot of form but couldn't successfully process. Below is one of my problem...
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Microsoft Access Driver]General error Unable to open registry key 'Temporary (volatile) Jet DSN for process 0x9a8 Thread 0xa08 DBC 0x3041e1c Jet'.
View Replies
View Related
I have this insert statement where instruction field in the DB is a memo field.
SQL="INSERT INTO int ([instruction]) VALUES " & _
"('"&Request.Form("myTextarea")&"')"
objConn.Execute(SQL)
Its giving me error:
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement.
View Replies
View Related
Can someone tell the ALL the reserved characters for regex?
View Replies
View Related
i am trying to create a microsoft access based website. i have found that for simple access database, you can only view records with an asp page. but cannot insert.
is there any way about this?
View Replies
View Related
I have an asp page with a form. I want the add the values to a Microsoft Access table. The name of the table is "seminars" and the fields are "company, phone, email, etc.". How i can create a connection from asp page to the Microsoft Access database?
View Replies
View Related
I am using a data entry program and when I enter records on a certain form,
I get the following error message when I enter data in to an Access 2000 database:
************
Microsoft JET Database Engine error '80004005'
Cannot open any more tables.
/m3cat/metd_edit.asp, line 1911
************
Any suggestions on how I can solve this problem?
I have been told my the people that created this program that they don't know what the problem is and I am "on my own" for fixing it. I have no experience with ASP and need this problem fixed.
View Replies
View Related
I recently built an application using an Access database. The application works fine, but for some reason I am unable to FTP the database file back to my machine from the server... the operation simply times out halfway into the transfer.
Has anyone ever encountered this issue? I don't know if maybe some renegade connection wasn't closed, but I kinda doubt that's the case.
Is there even a way I can check what connections to the DB are open?
View Replies
View Related
let's say that I want to highlight some words or even a square of a table in yellow...how would i go about doing that? What code would work to do what I need?
View Replies
View Related
I'm having a problem in displaying a selected option from the drop down list in words. But after I selected an option, nothing is being displayed, I think the value can't be passed at all. Please let me know how to fix it.
<td align=center width=20%>Fruit:
<select name=""FruitName">
<%
" If not myRS.eof Then
while not myRS.eof
%>
<option value="<%=myRS.fields("ID")%>"<%If FId = myRS.fields("ID") Then response.write "selected"%>><%=myRS.fields("FName")%></option>
<%
myRS.MoveNext
wend
%>
</select>
<p>The fruit you have selected is <%=FruitName%></p>
View Replies
View Related
I have a database field that is a memo type. I would like to be able to only display the first 50 words from the database. I would like for it to show ..... after about 50 words.
I am using <%=Content %>. How do I trim this field to show only 50 words and then ....?
I tried the following code:
Function LengthTrim(input, length)
If Len(input) > length Then
Return Left(input, length) + "..."
Else
Return input
End If
End Function
then <%= LengthTrim(Content, 50) %>
But it would not work. I got the following error message:
Microsoft VBScript runtime error '800a01f4'Variable is undefined: 'Return' .
View Replies
View Related
I have data where first and last name are in one field. I need help
how to i separate first and last name in ASP.
View Replies
View Related
the spaces between the words (in a textbox for example) are removed when i try to pass the value to another page for saving.
View Replies
View Related
I want to take a string like this:Code:
string = "THE RED GIGANTIC AND HUMONGOUS"
and retrieve only the words over a certain length or longer (let's say 5 characters), maintaining spaces between them- result:Code:
string = "GIGANTIC HUMONGOUS"
View Replies
View Related
i am having trouble getting my REPLACE fn. to replace whole words only. basically, i'm running a 'spelling checker' fn. that uses the REPLACE fn. to find incorrect spellings and replace them. problem is, the fn. seems to replace all instances of a string, and not a whole word only as I intend it to be:
Code as follows:
StrInput = Request.Form("BKM_Search")
StrInput = LCase(StrInput) 'convert all to lowercase
StrInput = Trim(StrInput)'trim all empty space b4 & after string
StrCorrect = Replace(a_StrWrong, a_StrRight,1,1,1)
Let's say I want to replace the word "sea" with "ZZZ" only:
Example input: "Sean has some neat sea shells"
Example output: "ZZZn has some neat ZZZ shells"
View Replies
View Related
I have to develop a spell checker from scratch using asp language. as i'm a newbie with asp, there are still a lot of things that i don't understand. How can I add new words to my list of dictionary sorted alpabetically?
Do i need to use the database for this function? Can anyone show me? or if anyone knows of any websites that i can refer to.
View Replies
View Related
Let's say I have the following var:
Code:
strTemp="Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed"
and I am searching the string for another string 'amet', for example. How would I go about getting my page to output the word I search for and say 10 chars to the left and 10 to the right? So, in this case, I'd like to be be able to search the string with any
other string ['amet' for example] and have it output this:
Code:
...dolor sit amet, consecte...
View Replies
View Related
wondering if its possible to have some kind of searched word highlight! IE. every thing it throws up in return of search it will highlight why it has brought it up! so if search "a" all "a" in return results would be highlighted.
View Replies
View Related
is it possible (i heard u can replace) to filter out bad words using regexp? I'm using Replace() but it sucks without ALOT of extra code... but using regexp it seems better, with ignorecase, etc.
How would I do it? O, here's the way it is now:
<%= Decode(ChkBadWrds("Comment")))%>
How would I do something similar using regexp?
View Replies
View Related
how can i count how many words have i written in a text
area?Like taking an example ... i am writing in this textarea
of microsoft usergroup. and say in total i have written 50
words .. how can find out this information?
View Replies
View Related
I retrieved some data from the database and put it in a textbox but the words after the blank sapace cannot be shown, why is that?
Name = rs("requestor") 'where the name is "Sam Siew"
<TD><INPUT TYPE=TEXT Name=requestor size=12 Value=<%=Name%>></TD>
In the text box, it only show "Sam".
View Replies
View Related
how to capitalise all words in a string that are seperated by spaces. The string is variable and not the same every time hence I cant use the Ucase function as I wont know the exact position of the start of each word.
View Replies
View Related
I would like to have a text box where people can type a word they want and then click on a button to get the description of that word.The way I see it working is if the word they entered in the box is in my database a page will display the meaning corresponding to the word in the database. However if it is not then it will display a message telling them that.
View Replies
View Related
This code highlights words entirely. I look for the word nation it highlights words like abomination. So I only want the function to highlight whatever I'm looking for. Code:
View Replies
View Related
i have a form where the user keys in words to be searched from the itemDescription column in the database. My search works fine, but how to i bold that particular searched word?
View Replies
View Related
I'd like to add to my search function of my asp site the possibility to highlight in the result pages all the words searched.
View Replies
View Related
I have a small form which searches a SQL DB on several fields - ie.
WHERE Field1 = xxx AND Field2 = xxx AND Field3 = xxx
How can I do this so that if one search criteria is left blank, it ignores it instead of trying to match it in the DB?
View Replies
View Related
how can i transform say 12,000 to "twelve thousand" with asp?
View Replies
View Related