I have a sysmon activex control inside an ASP page. When I resize the window, the activex control does not resize itself to fit the window. Does anyone know how to make the activex control automatically resize to fit the window?
View RepliesI have an ASP 3.0 page that contains an ActiveX control that I wrote in VC++ v6.0. Under Visual Interdev I can debug the ASP code just fine. However, when I get to an ASP line that references my ActiveX control the debugger does not go inside my C++ code allowing me to debug the ActiveX control.
If I load the ActiveX control project from VC++ with Internet Explorer as the debug executable I have the same problem. Break points in the ActiveX control's code are not respected. I know I'm compiling in Debug mode,how to get these breakpoints to be respected?
My client wants me to add a functionality which would enable him upload and resize the pictures. His server is having ASPUPLOAD and e-kov components intalled. Also he doesn't want to write files to the disk and save only to memory.
I can use ASPUPLOAD's functionality to save files in memory or save files in the database. My question is how can I access a file so that I can resize the image using e-kov software. And when using 'upload.save' only, without path, it saves the file virtualy but where does the file and how to access it.
I currently use ASPImage and resize JPG files with no problem. How, though, do I resize GIF images? Is there a different component?
View Replies View RelatedI have been using Imager Resizer....
View Replies View RelatedRecommend me a good free image resizing tool you've been...
View Replies View RelatedI have a load of images on a server, but I don't want to resize the original images. I want to display the images on a page but at a reduced size.
Just forcing the browser to display the images at a smaller size using the width/height attributes is not really acceptable as the picture looks like *** (a technical term if ever there was one :P).
Ideally I want to see if there is the functionality to properly resize, i.e. resample?, the image on the fly. Im not interested in storing the images just resizing and displaying.
I have a web page which pulls images from a access database.
The images are displayed on the page from a recordset (objRS("Thumbnails") - Thumbnails being the field in my database that holds each image.
However, because I want the images display in thumbnail format, it means I have to open Photoshop and resize each image to thumbnail size (100 x 100) before adding them to the database.
Is there a way in ASP that I could code so that each image brought in from the record set, no matter what size, will display at 100 x 100px so I don't have to manually resize them to thumbnail size myself?
I'm designing a site in asp where the user can upload an image and the page will read from a database and show the image. The problem is that all images are odd sizes and the image is being stretched when displayed on the page. I want the page to intelligently resize the image so that it will fit within the confines of a frame. I've tried all sorts but nothing seems to work.
View Replies View RelatedI need a help to prevent resizing of <TDwhen i post inside this <TDhtml text of other web page.
View Replies View RelatedI realise that ASP can't dynamically create images on the fly using ASP code. I am considering getting a DLL file to do this for me. My question is this: do I just place the DLL on the server with my ASP file? As DLL files need registering, how does this work with using a web server? I have a folder called cgi-bin on my server.
I realise this is more a question for my webhost but I have never used a dll before and wondered if anyone could shed some light on what is involved?
making the image proportion to its size...
View Replies View RelatedI've been looking for ages for decent serverside (or clientside I suppose,) software for uploading images. I need the software to make thumbnails of the images too.
I'm making a property website product and I need to make it easy for the user to upload pics by browsing to them and selecting them. When he/she adds the info and photos the thumbnails will be made automatically ....
I have a register module where user can register with their information and they have to upload their images.
1. I need to know how i rename that image and upload to server with that new name.
2. how to i change the image's height and width and then upload that image.
I've been tasked with the challenge of re-sizing images linked via BBcode on the fly. I have compiled a list of functions that do individual components of this task, but stringing them together has proved, well, a challenge.
I discovered this code that will re-size the images, however this will need to be added on an ad-hoc basis, and the fact that the image name appears twice complicates the usual system I used to add the code.
Usual way of replacing the code (inside a function):
Code:
vText = Replace(vText,"[ img ]","<div align='center'><img align='middle' src='")
vText = Replace(vText,"[/ img ]","'></div>")
Image resize code:
I need to install a component which will upload and resize images (jpegs). I don't need too many bells and whistles but would like one which is reasonably good at keeping the file size low (or lets me set the compression options).There's quite a few out there, has anyone any recommendations?
View Replies View Relatedhow do I resize a two-dimensional array? The array I'm working with is "data(X)(Y)" where X is 0 or 1 and Y grows to a dynamic number.If "data(1)(highest element)" IsNull, then I need to strike it from the array. I believe this should be doable by simply resizing the second dimension down by one. Through researching I established the following set of code:
I = UBound(data(0)) - 1
ReDim Preserve data(2,I)
But it results in a "Subscript out of range" message on the latter line. Short of looping through and building a new array.
I have a script on a site that i am redoing and have used an i frame that resizes depending on the size of the page that is loaded into it.
I would like to use an existing asp driven page from a realesate site to laod in to the iframe as the "listings" section; however the frame will not resize. any sugestions? Code:
What is the difference between the HTML <table> and ASP <asp:table>? I've just shifted development environments from DreamWeaver to Visual Studio. I've put together a page by dropping elements directly onto the grid, but I get no automatic reformatting. My old technique from DW would be to put it all in a table for formatting, but I find that clumsy in VS.
First, they have both html and asp table controls, and I don't know the difference between them. Second, the two controls are rendered on the design page differently, and I really can't tell what they are going to do. Third, the asp:table is shown without any rows or columns. What's up with that?
My company works with a lot of estate agent websites and other projects that require images to be uploaded by the client (and their employees). We have been searching for a client-side resizing application (such as a Java applet) that can perhaps create a thumbnail, as well as a smaller version of the original file and then upload these two images to the webserver.
There are plenty of php and perl Applets that do this, but none that can submit to an ASP form.
I am working on a gallery and am uploading pics. Is there any way of resizing the resizing image eg make a thunbnail from the image been upload. Also can I rename the image so that images aren't overwritten.
below is the code I am using.....
is it possible to resize images uploaded in the dundas component or any other upload 3rd party component.
Also i woudl like to be able to rename them and put in specific folders?
Can this be done? I have designed a site that displays images in a specific dimension, but the majority of site visitors either disregard this requirment or don't know how to resize images. Is there a way to upload in image and then physically resize it to whatever I want?
View Replies View Relatedi pulled this out from an archive but without any comments or instructions on how to use it. any ideas. Code:
View Replies View RelatedHow will create no.of check boxes as per user requirement in ASP. How will we keep the names to the check boxes.
<% for i=1 to n %>
<input type="checkbox" name=? >
<%next%>
How we use the naming convention in the place of? How can we check the condition by using above naming convention
if( checkbox.checked =true) then
<< body of the condition>>
end if
I have a Base class that is inherited by Form.aspx them Form.aspx loads 2 controls Menu.ascx that never changes and a body control that is selected dynamically at runtime. On each of the body controls I have a Function for validating the page Val() .
What I need to do is when an image button is clicked on the Menu.ascx I need to Fire off Val() in the Body control. Is this possible? I have tried setting a session var. but I have to load menu.ascx after the body control for the page or the body control does not function properly?
FormView & DetailsView are great controls in the new version of ASP.Net, but
I am finding it tricky to display more than the record that either control is
bound to at the time. For these controls to be useful in any mode other than
read-only, we need the ability to populate controls like drop downs that hold
associated data, which in the DB represents foreign key related data. In
order to do this, do I create a template field that has a seperate control
that binds to a different data source pulling back the "lookup" data?
I have a list of radio buttons that is populated from the database.
The value of this radio button from the DB is SalesRanking
If one selects the radio button (Sales Ranking) then I want to display 2 select boxes.
Is this possible?
I have the following problem: I have an asp-page which contains a loginview
with two templates (loggedin- and anonymoustemplate). How can I access a
textbox inside the the loggedintemplate from the code behind c# module?
I tried: (TextBox)Page.FindControl("TextBox1") but that will result in a
null pointer.
I also tried:
(TextBox)Page.FindControl("ContentPlaceHolder1.LoginView1.TextBox1") with the
same result.
I am using the object command in asp page to download and register my controls on the client machine. But when a upload the file and run the page on client machine its shows means the permission to download the controls but it didn't download it on client machine as a result i am not able to use any of the control function from page. what to do.
I am using this object tag to download
<OBJECT
ID="voxPlayer"
CLASSID="CLSID:45C0D292-1955-4ABF-8FFE-BEDC323ADBD9"
CODEBASE="http://<ServerName>/<myControl>.cab"
height = "10"
width = "20"
border = 2>
</OBJECT>
Am i missing anything
How do I add controls in an asp page at runtime ? Does anyone have a sample piece of code? or sample? or link?
View Replies View RelatedCode:
<input type="txtLast" name="txtLast" size="20" style="background:#000000; color:#FFFFFF">
I want to change this color when someone selects this control. I know in visual basic the set.focus function works. how do I apply this to this control.
I am just learning asp and I have a question. Is it possible to disable a control that is on one page from another?
For example, I have a control on "Control.asp" and I want to disable it from "Sample.asp"? Is that posible? If it is, how is it done?