I would like to use Server.Transfer to redirect users to a given page,
while maintaining the state of form fields. This works fine on a single
server.
However, this will be deployed in a load balanced environment. I know
that Session variables and load balanced environments don't mix. Do I
have a cause for concern with Server.Transfer as well?
Any idea what is causing this error? 006~ASP
0230~Server.Transfer Error~The call to Server.Transfer
failed while loading the page.
Just read about benefits of Server.Transfer over
Response.Redirect, replaced, and getting the error.
Real quick, please refresh my memory which one of the following preserves the information that was posted from a form?
server.execute
server.transfer
response.redirect
I need to have a page execute if an error occurs while processing a page that a form was submitted to and have the data preserved.
Any one has Idea, How to use Server.Transfer and Server.Execute, When I tried to use these methods I got an eror:
Server object error 'ASP 0230 : 80004005'
Server.Transfer Error
/SISWeb/portal_logon.asp, line 40
The call to Server.Transfer failed while loading the page.
anybody is there who can respond to this problem. Do I need to change any setting at IIS?
The Transfer method allows you to transfer from inside one ASP page to another ASP page
Is there a similar thing - The Transfer method taht allows you to transfer from inside one ASP page to a DLL.
I m using ASP(not .net) ,I want to use server.transfer from a.asp to a.asp (the same page), but i want to remove all the querystring before transferring the page.........although response.redirect can do, it cannot fulfil some response.write b4 the redirection.
View Replies View RelatedI am using the following statement in my asp page , it doesnt work
server.Transfer(ftp://mymachine/dir1/data.zip)
How would i embed the Server.Transfer() into the button onClick() event.
I did try this:Code:
<td><input type="button" name="edit" value="Edit" onClick="<%Server.Transfer("edit.asp")%>"/></td>
but this will display the edit.asp page without the need to click on the Edit button.
How can i transfer files from one web server to another web server. Is it possible?
View Replies View Relatedi'm using a model, view, control architecture for a group of .asp pages.
i can't decide whether to use Server.Transfer or Server.Execute to pass posted data from my control to my model. are there security implications for using Server.Execute?
just wanting some advice on pros/cons to each of these since this is the first time i'm attempting to use these methods.
I have 2 seperate web applications A and B. During the execution of A, I want to do a Server.Transfer to a page in application B. This works fine if A has a reference to B, but without the reference, I get the following error:
Parser Error
Description:
An error occurred during the parsing of a resource
required to service this request. Please review the
following specific parse error details and modify your
source file appropriately.
Parser Error Message:
Could not load type 'B.WebForm1'.
Source Error:
Line 1: <%@ Page language="c#" Codebehind="B.aspx.cs"
AutoEventWireup="false" Inherits="B.WebForm1" %>
Line 2: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" >
Line 3: <HTML>
Source File: c:inetpubwwwrootBB.aspx Line: 1
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:1.1.4322.2032;
ASP.NET Version:1.1.4322.2032
It seems to be looking for B.dll in the path for application A, and can't find it. Because of the specifics of this project I am unable to set a reference, or even include a <codeBase> element in the config file. Is there any way to force the runtime to look in the path of the target application instead of the launching app?
This works:
Server.Transfer("testimonials.asp")
This does not
Server.Transfer("testimonials.asp?somevar=yes")
I am thinking of creating a custom 404 page which does a server.transfer to a variety of different pages. My question is what shows up in the log, which the web statistics are based on?
1. The non existent page, which is requested?
2. The custom 404 page?
3. The page it gets transfered to?
I am trying to open a jpg file using server.transfer which is giving me this error
I have about 10 images out of which 7 are working and for three images i am getting an error message.
I have listed the error message
Active Server Pageserror 'ASP 0116'
Missing close of script delimiter
/rtp/trt.jpg, line 11
The Script block lacks the close of script tag (%>). error '8000d001'
/ttt.asp, line 7
Please send me a solution as i have been trying this from the last three days and could not find a solution.
I read somewhere that server.transfer had a 2nd parameter so control and input values were 'passed' to the transferred to page, but it's giving me an error of wrong number of parameters. I have IIS5, is that the problem? or is it that it's an ASP page (not ASPX)
View Replies View Relatedwhen i try to redirect a page using the server.transfer i get this error:
Active Server Pages error 'ASP 0116'
Missing close of script delimiter
/database/mydatabase.mdb, line 7832
The Script block lacks the close of script tag (%>). error '8000d001'
/admin/pages/DatabaseMan1Re.asp, line 15
Line 15 is:
Server.Transfer("/database/mydatabase.mdb")%>
I'm trying to pass 2 simple values (an integer and a string) from a start page (start.aspx) to an aspx contained within a frameset (say destpage.aspx).
I can server.transfer the values directly to destpage.aspx but I'm struggling to work out how pass the form values to destpage.aspx when it is contained in a frameset.
Is there an easier way? Is it possible to pass the values to an aspx that defines the frameset then pass to destpage.aspx?
If I redirect a page using Server.Transfer() will I get a HTTP_REFERER from the original page?
View Replies View RelatedI user Server.Transfer "MyTest.asp" to redirect the ASP page and it went through successfully If I used
Server.Transfer "MyTest.asp?R=22
The system return "An invalid character was specifiied in the Path parameter for the MapPath method." error (It seems that system treat parameter string as body of path
This ASP works fine in Windows NT server, but it does not work on Windows 2003 server.
Got a quick query in relation to the Server.Transfer method available in IIS
5+/ASP. I've got an issue where I want to take a portion of an online app and
extract this out into a web site on its own, so I will end up having two web
sites. This planned to aid problems we've been having with performance, as if
the portion (which is an app in its own right) has problems we then have to
restart the whole site and so bring everything down just because of the
portion of the app which we're having issues with. Taking the portion of the
site will allow us to run it in isolated mode in ISS and so just restrat that
if needed, while not affecting the rest of IIS.
Anyways, I'm in the process of writing a jump page to facilitate the process
of moving from the first site to the new second site, but as we need to reuse
session info created in site 1 I need a way of passing this over to the
second site.
I've been aware of the Server.Transfer but never really used it so I'm not
too sure how I can actually use this. I was planning to write an ASP page
that takes the required info out of session is site 1, calling
Server.Transfere to send it over to the second site. I don't want to do a
Response.Redirect, not wanting the client to do this and not allowing it to
know what info I'm using in the session.
And so, I thought the Server.Transfer would facilitate this, but after
reading some of the documentation on MSDN I'm not sure I can, ie: redirect to
another ASP page in this way and tack on a QueryString holding all the
session info I need, as MSDN says that I'll get an 'ASP 0173 error, "Invalid
Path Character"' error if I have a question-mark '?' in the path, or any
other of a list of invalid chars. But then I need this '?' char to build my
QString ie: XXX.asp?sas=123&jdy=0689...
So what I'm after is some clarification that I can use Server.Transfere in
this way or not, ie to redirect to an ASP page and tack on a QueryString, of
if it just allows for an ASP page without s QString. So then if I want to do
this I might need to use the Response.Redirect method, or some other way!!
MSDN also says: "When you use the Transfer method, the state information for
all the built-in objects are included in the transfer. This means that any
variables or objects that have been assigned a value in session or
application scope are maintained"
....So will I have the session info from site 1 available in site 2 after the
redirect or does this only apply for a Server.Transfer within the same web
(which I think is what it means!).
I don't have an environment up that I can test this on yet so I'm kinda
feeling may wat in the dark here, hence my lengthly post.
When using the Response.Redirect in test1.asp in this manner:
Response.Redirect ("test2.asp?err=something&msg=somethingelse")
You can pass values calculated in test1.asp to test2.asp.
But this is a round trip redirect - and also shows passed values in
the address bar.
But when using Server.Transfer, as in:
Server.Transfer ("test2.asp?err=something&msg=somethingelse")
This is apparently not allowed, as I get an error claiming that
non-relative references in the path of the file are not allowed.
My question is:
*Without* using application or session stores, how can you pass values
between pages called in this manner - values that are not a part of
the originally submitted information?
Any ideas on how I can set some data in 1.asp, then have 1.asp do a server.transfer (or .execute, come to that) to 2.asp, and have 2.asp access the original data?
I'm aware that the Session object fits the bill but want to avoid using this if I can. Having said that, the nature of the data is very much per-user so things like the application object are definitely inappropriate.
Another way I can do this is redirect/querystring, but the additional roundtrip here is not attractive.
Any other (sensible) methods anyone can think of?
ok here is my scenario - using model, vew , controller architecture:
-- user submits the view page to the controller
-- controller issues a server.execute on a model page to update the changed information
-- upon successful updating of the the information, the controller issues server.transfer back to the view
-- everything is fine at at this point, however, if the user hits the
re-submits the page at this point, the original items are still in the
request object from the first time around because the page never went out of
scope - so this causes another update to be inssued because changes are
detected between what is in the database and what is in the request.form
collection.
I have a subdirectory with it's own images folder. All the image paths in the pages in the sub directory are "image/image.jpg" When I Response.Redirect to a page in the subdirectory the images are fine but when I use Server.Transfer all the links are broken. I'd prefer to use the relative paths. Is there a way around this in the Server.Transfer?
View Replies View RelatedIs there a way to clear out the request.form collection, or the entire request object, for that matter?
I'm using server.transfer and this can be troublesome in cases where you need the request.form items to be reset.
i'm setting up my web new server. i see that cookies do not persist after a Server.Transfer or Response.Redirect although i do expire them the next year.
View Replies View RelatedI have a form that is posting to itself. Does the necessary validation on the data.
Once it passes all validation, it is redirected to another page. I need to access the data that was submitted on the first page on the redirected page.
I know you can pass your data along via URL but I am unsure how to access the data once it is in URL form.
I also read that you can use Server.transfer and access your form objects with request.form(var_name).
I have some ASP questions which I wanted answering (have an interview comming up)
1) What is the difference between response.redirect and server.transfer
2) How can you deal with recodset paging using ASP?
3) What are the different locking type and cursors in ASP?
I have a problem with getting a redirect to work on our server.
It's worked fine on our server for months, but suddenly won't work and I
can't figure out why.
codewise, It's nothing special:
Response.Redirect("indexThankYou.htm");
instead of redirecting the browser to this page, an JavaScript-alert-style
message comes up with the text:
Cannot Find 'file://E:wwwrootmdc00152-learnproengine2_00index.htm'. Make
sure the path or Internet address is correct.
(No page exists, nor was there ever any mention of it in the code)
I've examined the output with fiddler to find:
<html><head><title>Object moved</title></head><body> <h2>Object moved to <a
href='E:wwwrootmdc00152-learnProEnginev2_00index.htm'>here</a>.</h2></body></html>
I've checked that the aspnet client folder, and it's there and loads with a
code 200 (from fiddler)
Has anyone any ideas why this might have suddenly stopped working? Does
this sound like a cache-ing problem? The code has worked fine previously.
On my WinXP machine, with both IE6 and Firefox 1.0, response.redirect and server.transfer take about a minute. But on my WinNT machine with IE5.5, it works instantly. What's going on?
View Replies View RelatedOk, I give up... why do 1-4 work fine... but 5-6 give "can't find" errors?
1. Client-side VBscript code: call navigate("209.11.22.33MyDir")
2. Client-side VBscript code: location.href ="209.11.22.33MyDir"
3. Typing "209.11.22.33MyDir" into my ie6 browser.
4. Typing "209.11.22.33MyDir" into my Windows Explorer.
5. Server-side ASP: server.transfer "209.11.22.33MyDir"
6. Server-side ASP: response.redirect 209.11.22.33MyDir"
How do I make it redirect?
I've got an application that I want to redirect to another file while keeping the location of the file hidden. In other words,
WEBROOT.COM/REDIT.ASP?a=14
is going to display the contents of file
WEBROOT.COM/SECURE12954
without the user knowing they are in the /SECURE12954 subdir.
Which is better to protect that privacy the name of the /SECURE12954 subdir?
<%Server.Transfer("/SECURE12954")%>
or
<%Response.Redirect("/SECURE12954")%>
or
<!-- #include file="/SECURE12954" -->
Our asp programs seem to have different behaviors when users use IE and firefox. One of most annoying things is the data disappearing problem in IE but not in firefox.(Note: Sometimes a search program can run much faster in Firefox than in IE, don't know why)
For example, I have an internal user interface which they can do different product data
entry, the program will use Server.Transfer to different asp program for data entry.
Page1---UserInterface.asp
Select Case Request("Product")
Case "Sel"
Server.transfer("/Virtualdir1/test1.asp ")
Server.Transfer("/Virtualdir2/Test2.asp")
Case "Bear"
Server.Transfer("/Virtualdir3/test3.asp")
Case "IMED"
Server.Transfer("test4.asp")
Case "AC"
Server.Transfer("/Virtualdir4/test5.asp")
Case Else
End Select
When user finished data entry on test1.asp(second page, the web address will still show UserInterface.asp page as you know), click continue, on the third page if they found something typed wrong, if they click back button in the broswer, all data on the second page is gone. This only occurrs in IE, Firefox is fine.
It's very annoying, how can I fix it, if not, is there any other way?