I'm having a problem where I'm losing Session variables as soon as they've been set up. The user logs onto the system, the system sets some Session variables, and redirects to a menu page. The menu page checks the Session variables, can't find them, and asks the user to log in again - the second login is successful. Has anyone seen this before, and do you know what I should do about it?
View RepliesSession expiring immediately. what could be the reason ?
View Replies View Relatedif user clicked the Sign Out button, the session abandon and the login page displays. If the user clicks the browser Back button, it won't show the previous page. It shows only the login page. How does is work?
View Replies View RelatedI usually clean the session when the result page is presented to the user.
At this time, say an email confirmation was sent to the user and a pdf file
they can becdownloaded from the result page.
But if the user click the refresh or back button etc. for some reasons, they
pdf file is not available since it created on the fly when the request was
submitted.
So I am thinking about pull pdf file from database, but don't want the
database being hitted everytime the refresh button was clicked or the
requested is resubmitted.
In my Data Access Page, I have a a combo box from which the user can select a specific record to view based on the value SupervisorManagerName. My combo box works fine in that respect. The user clicks on a name in the combo box, and the record is populated with the correct record.
When I add a *new* record, however, the combo box does not refresh immediately to include the new SupervisorManagerName in its list. Once I close the DAP and then reopen it, the new SupervisorManagerName is included in the combo box, and I can select the name to pull up the record.
Any suggestions on how to get the combo box to refresh immediately upon adding/saving a new record without having to actually close and then reopen the page?
I am able to make this process work using VBA and a regular Access page, but can't figure out how to do this using vbScript Code:
i have a problem with my asp code...when i run a query, i insert the results on a temporary table...everything works fine except when i try to load the result page, it doesnt not display the recordset...
i need to press F5 always so that the page will be refreshed to show all records in the table.. how can I retrieved all inserted records in the temporary table without reloading the page?? below is my result page... Code:
I did a program with allowed to user to upload an excel file and insert those data into the access database. I did the testing on xp pro and to upload abt 300 records took me less than a minute.
However, the computer which the program is to be located is using windows 98. So i dowlnoaded the free server thingy. The upload time for 300 records here took about 15 minutes. haha
Just want to know what makes the uploading time so different?
Can ASP pull the time it takes for a query to be hit on a DB and returned?
I see outputs like :
"6 results, query took 0.24 seconds"
I know the "6" comes from a record tally, but how can I calculate the time?
I have been tasked with producing a script that times the amount of time it takes to upload a file from client to server.Unfortunately for me, part of the spec is that the script must be written in ASP which is something I have about 30 minutes experience in.
I have been playing around with the script located at this address :
http://www.asp101.com/articles/jacob/scriptupload.asp
Which does almost everything I need, the only thing it doesnt do is tell me how many seconds/milliseconds/widgets it took to upload the file to the server (excluding time to write to disk once received)Can anybody point me in the direction of another script that can give me timings, or at least give me some pointers on how I can hack the above script to give me the data I need (I have already worked out how to get rid of the save to DB and user name option and this is now gone from the display page and the working scripts behind it)
Is it possible to put a time counter on a page which say after 20 minutes will automatically terminate the session using the abandon function?
View Replies View RelatedI open a asp page where the user fills in some details in and submits the page. The form will be submitted and sent to a diffrent page, it will check and return whether the transaction was successful or not.
This is a timebound process the time starts as soon as the form get loaded. Suppose the time is 10 minutes so if the user fills in the form and submits the form. We would consider the transaction successful if we receive notificaton of the transaction being successfully completed within this 10 minutes limit, if it takes more than 10 minutes than we consider the transaction to be unsuccessful.
I want to call a procedure 20 minutes after the page loads in vbscript. Could someone how to time the page?
View Replies View RelatedI have a piece of code that i created. It actually works as it should. The only problem is the objrs2.update causes an error-duplicate primary key. However when i check the database it has done what it should.
I then tried to use on error resume next, but it keeps timing out and i do not want to extend the time limit. Does someone know how to get round this? Code:
I have a small (half a meg or so of source, and a 2.5MB database, and a few images) ASP web app in place, and it's running fine except for the fact that occasionally people have session timeouts and are suddenly not logged in.
I've turned the session timeout in IIS up, but they still seem to get logged out in less than 15min, rather than 2 hours, as intended.
I am having a problem executing long running queries from an ASP application which connects to SQL Server 2000. Basically, I have batches of queries that are run using ADO in a loop written in VBScript. This works pretty well until the execution time of a single query starts to exceed some threshold, which I am trying to narrow down. I can typically run 2 - 10 queries in a loop, with the run time being anywhere from under a minute to an hour or more. Now that this application is being subjected to run against some large databases (25 - 40G), I'm having problems getting the application to continue beyond the first query if it takes a while to run.
I used SQL Profiler to try to diagnose what was going on. I can see the query executes to completion, but immediately after completing I can see an "Audit Logout" message, which apparently means that the client has disconnected. The query durations vary from 45 or 50 minutes to up to over 90 minutes. I have the ADO connection and query timeouts set to very large values, e.g. 1000 minutes, so I can't think its that. My guess is that there is some IIS setting or timeout that I am running up against and the connection to SQL Server is just dropped for some reason.
The configuration is
NT 4.0 SP6
SQL Server 2000 SP3
IIS 4.0
Explorer 5.5
I'm only running into this problem on the very largest databases we run against. The vast majority continue to function properly, but this is going to happen more often as time goes on the databases continue to grow in size.
Is there a way to 'force' a submit on a form with out actually allowing the
user to press a button ? For example...
step1: A from is filled out by a user, then they click the submit button.
step2: The form is 'post'ed to an ASP page which writes the values to a
database. So far No problems. But..
step3: Now I want to 'post' these values again to another page without any
user interaction.
My ideas were:
1) I know you can get the form values from Request.Form("myVar"), so I
thought of making a 'dummy' form and setting the 'values' of the form
variables to these Request.Form("myVar") valiables, but I don't know how to
'submit' them to another page again.
2) Is there some type of 'submit' command in ASP?
how to find the session expired or not without using any session varaibles?
View Replies View RelatedI have a site that I'm trying to migrate to ASP.NET from ASP, and the
foremost stumbling block I'm hitting is session state between the ASP
and ASP.NET applications. In order to access this information, I'm
doing a HttpWebRequest from the ASP.NET side into an .asp page,
passing the session name on the get in order to request it from the
ASP side and write it back to the response stream, giving ASP.NET
access to it. Of course I change sessions each time I make the call
from the ASP.NET side.
Soooooo, I'm thinking to myself, "Self, shouldn't you be able to fake
out the server by getting the session cookie from the initial usage of
the asp, pass that data to the ASP.NET, and use that to send a request
back the ASP side under the appropriate session?"
From a real high level, I enter the site via a .asp page. This page
in turn calls .aspx page from within a frame ......
I want to create an administration page which lists all the current users who are on the site at the moment.
I know coldfusion has this feature built in using the SessionTracker class... does ASP have something similar? If not... is there any way I can just iterate through all the session files on the server...?
I have a site developed using ASP, but each page I enter has a different session id when accessing the site using the domain name of the site. When accessing the site from my network and using the internal IP address, it is OK. Any ideas?
View Replies View RelatedI want the suggestion what is better for use between:
Session.abandon
&
Session.Contents.Remove
I wrote a website, which uses the session to store and track some vars.
Now I am gonna to covert it to desktop application by Activesite compiler 5, however, it doesnot support session , cookie , application() . SO ,I have no idea to find something can instead of session.
My orignal processing: Session -> modify Session var -> store to Database.
There is a problem about ASP session ID. ASP session is implemented by storing session id in a session cookie, but I read this cookie in ISAPI Filter, get a string as following:
ASPSESSIONIDQADCQQTS = IAOFCBBCGDGMDGCNJIKPNBAN
But the real session ID is 554851848. (Real sessionID is sessionID property the ASP session object)
Problem is what is relation between them? And how to get real session ID from cookie session ID.
I did a session("adminlogin")=1, if I post it to the same page, it returns true. But if I response.redirect to another page. This value doesn't exist anymore. This is on the actual server where all the ms security is updated.
The same script worked okay on my test server (the security patch not patched yet.)
Has anyone encountered this? How do you overcome it?
I tried searching the net it says the problem lies with a ms security patch. How I wish I can unintall that patch.
when does a sesson object expire?
- at the end of 20 minutes
- after they close their browser ? does that end the session?
I have a home page in html with two buttons to call my main.asp in another window my problem is:
1-From my home page I open another web page my main menu, this new page have a SessionID. (OK)
2-If I open another web page from the same home page, this new page have the same SessionID as the page open in first step
I want to get a new SessionID for every page I open from my home page and don't want to abandon the first session...
I have asp and asp.net web application. When I run it in IE7 in first tab it
starts a new session. When I open second tab and browse to the same site the
new session is not started (infact I need to have new session there).
Whereas, 2 IE instances generate 2 unique sessions. Only issue is with IE
tabs. Firefox also has similar things but lets not talk about firefox here.
I am more concerned with IE only.
In my login script I set session("User") = rs("User") the session timeout is set to 20 min
Do I need to setup some kind of update session variable on each page so that the timeout does run out or does iis update the variable aslong as I'm browsing the website ?
And another thing, <% application("something") %> works fine on my test server but once I implement it onto the main webserver I dont get any text out, is there some kind of switch that enables this function ?
How can I know if a user session had timed out ?
I always get an error in my asp page when I try to access
my session variable if it timed out.
My buttons default as you can see in the code. But I now want to take what is already choosen in database and chose apropriate button. Can I use a session to choose a radio button?
Code:
<TD><b><font face="Arial" color="#000080">Password</TD>
<TD><input type ="text" value="<%=Password %>" input name="Password" size="50" ><input type ="Hidden" value="<%=userNumber %>" input name="userNumber" size="50" ></TD>
</TR>
<TR>
<TD><b><font face="Arial" color="#000080">Billing Choice</font></b></TD>
<TD><fieldset style="padding: 2">
<input type="radio" value="Monthly" checked name="R1">Monthly
<input type="radio" name="R1" value="Quarterly">Quarterly
<input type="radio" name="R1" value="Annually">Annually</fieldset><p>Hold
Billing Date <input type="text" name="NextBillDate" size="20" Value=<%=NextBillDate%>></TD>
</TR>
I am using the session(loggedin) to see if a user is logged into that section of the site. The problem is that it is timing out on them, is there a way to define the length of the session (I think it times out at 10 or 20 mins currently), but to extend it to an hour or so. Any thoughts.
View Replies View RelatedI've developed a shopping cart app in ASP, to secure transaction by SSL, it 've put only the checkout page in SSL but all other pages i.e. product, cart etc remains on non SSL connection. How can I track user session from non SSL to SSL checkout page as the SessionID changes when shifting to SSL (to prevent session stealing/ hijacking). I'm tracking user session by putting SessionID in cart DB with products. Given below the preview of cart table ....
View Replies View RelatedI'm trying to only show part of my page based on a variable, I have two
Session Variables -
Session("EMPLOYEEMAXUSERS")
Session("EMPLOYERUSERS")
Now what I'm trying to do is -
ShowIf Session("EMPLOYERUSERS") < Session("EMPLOYERMAXUSERS")
I can't get this to work though