I want to add articles to a database with the intention of displaying the first so many characters (like an intro) of the field on the home page. The database would be an Access db with the field holding the html for the page in question. How would I go about this?
View RepliesI have problem to print out a table data only the data witch have the field paid yes..
I used
pi.Open "select * from invoicees where paid like '"&yes&"', "DSN=anitel"
What's wrong
May I know how to restrict the user to key in at least 6 characters from the text field by using asp? If possible
View Replies View Relatedi have a form that has two hidden fields.The first hidden field will has a value like this 'EM12HILL.JPG'.The second hidden field has a value like this 'AA01'.What i would like to happen is when submit button is pressed, the characters in the first hidden field will change to the following 'AA01HILL.JPG', as they are passed to another form.
View Replies View RelatedIf someone submits a phone number in form, such as 707-433-5434, how could I get the last four digits into a variable, ie., 5434 in this case?
View Replies View RelatedI've been tasked with integrating an older management system based on
DBF files with my snappy new ASP application to provide users of the
ASP application with real-time data from the management system.
I figure with DBF files, I should use either the DBase drivers or the
FoxPro drivers to connect to the database. Code:
Here is my code. I'm using 2 pages.
(Page 1) blob.asp
<%
set Recordset1 = Server.CreateObject("ADODB.Recordset")
Recordset1.ActiveConnection = MM_blob_STRING
Recordset1.Source = "SELECT AboutPic FROM Elizabeth.GF_AboutUs"
Recordset1.CursorType = 0
Recordset1.CursorLocation = 2
Recordset1.LockType = 3
Recordset1.Open()
Recordset1_numRows = 0
%>
<%
Response.contentType = "image/jpg" 'Recordset1.Fields("AboutPic") <---Tried
both methods
size = Recordset1.Fields("AboutPic").ActualSize
blob = Recordset1.Fields("AboutPic").GetChunk(size)
Response.binarywrite(blob)
%>
(Page 2 Show the Image)
<%
Dim urlString
urlString = "?" & Request.QueryString
%>
<% Another rs to show other information as text from the same table %>
<body>
<img src="blob.asp<%=urlString%>" width="194" height="256">
</body>
I am using a Relational database for my site and i have the following tables:
FIXTURES, GAMEDATES
the fields in FIXTURES are:
GameDate
Home
Away
(All of the above are numerical fields)
the fields in GAMEDATES are:
DateID(integer)
GameDate(#Date Field#)
What i have done is in the GAMEDATE field in the FIXTURES table i have used the ID number of the date that i wish to assign to that record - using a LEFT JOIN to display the actual date that is pulled from the GAMEDATES table (That which corresponds to the relevant id used in Fixtures)
The problem is that in some of my code i want to display records using sql and sometimes in the where clause i use the following:
WHERE Fixtures.GameDate<=(Date())
obviously meaning WHERE GAMEDATE is LESS THAN or EQUAL to TODAY.
The thing is when i use the join it does not use the where clause and displays all of the records in the FIXTURES table.
Does any one know how to get around this, i have not received any error messages it just isnt displaying the right data
Im comparing values in a field while doing a loop if sAct<>myData(5,i) then At the end of the loop I make the value of sAct equal the current myData
This will work when comparing other fields withing my recordset (so I know the statement works) but it will not work for the field I want to compare. The only difference with this field is that it has null values. Could this be the problem? if so, how do I deal with nulls?
I have a input form with 5 fields. One of the fields is MajorNo and the other is named Description.
I have a reference table in my MS Access database (tblMajor)that lists the major numbers and their descriptions.
I would like to have the description field in my ASP automatically filled based on the major number entered on the form, so the user will only need to input the major number when submitting to the Access table (tblSalesTotal).
is there a tutorial around anywhere that tells you how to change images on the page when a user selects from a select box
View Replies View RelatedI have a database of songs listed as Title, Artist,Description, DiscNo and TrackNo with a seperate record in that format for each song.What I would like to do is search through them for the Description, show only the disc numbers in the results.
This I can do easily. Where I am lost is that I only want each individual disc number to show once. If I moveNext through the recordset, it shows the disc number 15 times per disc. Is there a filter I can add to limit this display?
Is there any way to input .asp code so that a specific element isn't show on a page? example: I don't want a menu on a specific product page, but I want it on all the others. Is there any code to input into a site wide includes file to implement this?
View Replies View RelatedI have a ASP application which let user to download their reports in pdf format. I would like to show a progress bar, or change the mouse cursor to a hourglass while the user is waiting for the file. How to acomplish this? In the asp code, I use response.BinaryWrite to create the pdf file directly to the browser. How to detect when the file is ready?
View Replies View RelatedI create a page which will show me all the Regions from the table "RegionTable" where I have no information (empty fields) in on of the fields RegionDescription or RegionRank.
It is to make my content managing easier. I do not want to see those records which contain all the necessary info (region description and rank).
I tried the following code, but it does not work
qry = "SELECT * FROM RegionTable WHERE RegionDescription="" AND RegionRank="" "
error message is:
([Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 1)
I have a query that displays values from a db.
The problem is that the value displays like this:
R 6.5
instead of like this:
R 6.50
How would I get it to show the full value?
ok, well what I have been having some trouble with is to show the person character name like this:
Welcome, 'Username' <-- Here I want it to show the persons username from the database.
I am using a Cdonts e-mail script that e-mails the results of a form to my address. It currently displays the data like:
Amount: 12.00
Percent: 2.00
I need it to say:
Amount: $12.00
Percent: 2.00%
How can I get the $ and % symbols to be included in the e-mail template without getting a 500 error?
Here is what I have:
Body = Body & vbcrlf & "Amount: " & request.form("amount")
Body = Body & vbcrlf & "Percent: " & request.form("percent")
I've tried a few diffrent ways but here is one example:
Body = Body & vbcrlf & "Amount: $" & request.form("amount")
Body = Body & vbcrlf & "Percent: " & request.form("percent")%
I've tried using / before the symbols and "" but everything I've tried keeps coming up with a 500 error. How can I add these symbols to my template so they will show up in the e-mail?
I know we have this thread somewhere, but I can't seem
to find it now
I want to show the first 100 chars of a string, but
I don't want a word to be cut in half at the end, it must
show the whole word then and go a bit beyond 100 chars.
How do you print out all of the contents of an array if all you know is the array name?
FOr example, I am looking at pre existing code that looks like this:Code:
scartItem2 = session("cartItem")
arrCart2 = session("MyCart")
For Z = 0 to scartItem2
cartfields2="&Email=YES" & "&processed" & z & "=" & arrCart2(cProductid,z) & "&quantity=" & arrCart2(cQuantity,z)
What I need to find out is if there are ANY other elements other than cProductid AND cQuantity in this array and what their names would be so I can add them to the code.
I know that I could print out the values of the above by simply doing this:
response.write(cartfields2)
But how do I find out if there's a cFeature or any other element?
i have very strange error.i can not see some of the asp pages on my browser. when i
look from view source, all the source is there but browser does not show anything, just an empty page.
im looking to find out how can i make, when the pointer is over a link or picture without clickin on the link an small textbox(something like that) open and show the content of that link. for example in this forum when you go over a thread you can see the content.
View Replies View RelatedI have a ASP page that when a user clicks a link it uses a DLL to stamp a .pdf with a watermark and then display the .pdf in there web browser using the Adobe Reader. This all works fine.
if a user views a pdf and then modifes it if they click the link again it still shows the old version of the file. They have to hit there refresh button to show the changes. How can I make it so my page always displays the lastest version of the PDF and not what is in the cache?
i have a website that users log on to. On one of the pages is a form. What I want to do is only show a certain part of the form for specific users. The way i want to do this is by using their username as a 'show if' command in dreamweaver. What I currently have is this
<% If Session("MM_Username") = "union" %>
all data to be hidden shown is here
<% End If %>
But this doesnt work for me! Any suggestions on how to show this properly?
I want to show the currency like that xxx.00. In my database, i already set the type of column which i want to show to currency. However, the currency can no be shown as my expect. It only show like that XXX..
View Replies View RelatedIn one of my ASP page, I want to show the visitor's IP. Who can I do that?
View Replies View Relatedhow to show popup windows (html format) and the size is depending on the size of image?
View Replies View Relatedi m displaying only 4 lines of my main news..and after that there is one link more...if user click on this link then the detail of this news will display....but problem is i want to show the rest of content of this news at same place..i maen to say after clicking more it will display my main news content in place of 4 line and more link Code:
View Replies View RelatedI have some problems with how to show error message. Now I have two asp pages such as page "A" and page "B" and When I click a button on page "A" then the process will check conditions from page "B" ,so if there're some errors it will redirect to page "A" and show error message box.
I would like to know that how to show the message box?
where in i could show in a dropdown the database table name as i would like the whole databse be searched according to a specific table?
View Replies View RelatedI have clustered IIS 5.0. It is working on a fail-over clustered model (Active-Passive), with one node as a preferred owner and the other only as a failover. I make the changes to IIS from one node, and then synchronize it with the other node.
All of the data is stored on a shared external disk array. I have around 50 websites. All of them work fine and are accessible. Recently I have found out a confusing problem though. Code:
I am trying to pass a hidden field value on a form into another field on the
form so that it can then be inserted in the database, to enable me then to
reference that number at a later date.
(The hidden value (1 for example) would then automatically get passed to the
other input field.)
The code for the text field that allows users to type an number into it for
submission to the db is below, but what code do i need within the hidden
field to populate this text field below so that users do not have to type the
number in? Code:
I have being working with making an edit field over the past few days. The edit function is now working fine. The edit fields that i have are for id, subject, notes, timedate.
All of the edit screens are one line text screens. What I want to do now is increase the size of the notes box to a larger textarea type box to make it easier to edit notes. The notes field in the db is a textarea field. Code: