I am running a stored procedure from an asp page. After the sp runs, it should export into Excel. However, I get an error 99% of the time that says: Could not open 'http://...... ' (name of the report and its location). Could it be timing out? I am not sure that would be (but it could be) as I am not getting that error message. Microsoft Excel is also saying it could be:
-->file name or path does not exist
-->The file is being used by another program
-->The workbook you are trying to save has the same name as a currently open workbook.
None of these seem to be true. Is anyone familiar with this type of error? What code can I offer for someone to take a look at it? Would you need to see the ASP portion or more than likely, the SQL portion? Any help to get this working would be appreciated.
UPDATE -- I can get the stored procedure to run inside of Analyzer, as it takes nearly 7 minutes to render the report. How can I alter the asp to not time out or to not give the error mentioned above?
I'm trying to access a stored procedure on our AS400 that is written in RPG. I know that the stored procedure works (I've called it from an RPG program on the AS400), and I know that the connection to the AS400 is good, because this same ASP page is reading data via SQL. However, when I try to call the stored procedure, I can't tell if anything is actually happening. All that I know is that the end result is not being changed, so I suspect that the procedure isn't being called correctly.
My stored procedure is used to encrypt/decrypt data. It has 3 parameters - a 1 character flag telling it whether to encrypt or decrypt, a 25 character field for the plaintext data, and a 50 character field for the encrypted data. The last two parameters are used for either input or output, depending on the value of the first flag (if the flag is "E", then the plaintext is used as input and the program fills the encrypted data field. If the flag is "D", then vice - versa).
Here is the code where I call my stored procedure. I'm trying to decrypt data from the queryString and place it in some program variables. I'm new to ASP, and can't find any good examples for my situation, so I pieced this together from what examples I found online. Can anyone tell me what I'm missing?
I have a problem with input parameter which has Decimal DataType. Stored procedure works but it rounds all values, i.e 5.555 input becomes 6 and 1.3 input becomes 1. In table QTY has data type decimal(5) - precision(8) scale(3). Please, suggest what's wrong with this:
how to use LIKE in a Stored Procedure ?I can use it as "where tbl LIKE @string"but it doesn't work truly.how can I use % ' & ?you know, we use LIKE in classic asp and sql as '%"&YYY&"%'.but how can it be used in Stored Procedure ?
the @Schedules are ID fields in a table that are integers. I would like to do an Update blah, Where ScheduleID in (@Schedules) instead of looping. How can I do this? I have to sent the values to the sproc as text, right? Where do I covert to the int data type and how?
why we use Stored procedure in VB/ASP? Why i am asking is we can do the same with SQL Query? What does this do the differnce?I need the main difference bet. these?
I have a query that selects from multiple tables and is complicated, thus making the number of code lines very big. I'd like to separate it from the page that displays the query results.
I have been told that a stored procedure will do the trick, but I've just come across another option, 'include file'. I'm used to programming in ColdFusion so I am familiar with the concept of including files.
I'm trying to access a stored procedure in oracle using asp/jscript.
I get an error message complaining about the parameters; [Oracle][ODBC][Ora]ORA-06550: line 1, column 7: PLS-00306: wrong number or types of arguments in call to 'UPDATE_BAKERY_USER' ORA-06550: line 1, column 7: PL/SQL: Statement ignored
I am new to asp, basically new to everything. but I am trying to create a log table and and trouble calling my stored procedure from my asp page, see code:
Microsoft VBScript runtime (0x800A000D) Type mismatch: 'sp_logsession' /app/lib.asp, line 71
i am using the following code to execute it in my asp page:
SET objConn = Server.CreateObject("ADODB.Connection") objConn.Open Application("deConn")
I would like to know if anyone knows how to execute a stored procedure from ASP.NET 2.0. I'm using the NorthWind database and I'm trying to execute the "CustOrderHist" stored procedure. The error I get is "Incorrect syntax near 'CustOrderHist'. "
Public Function GetCustomerOrderHistory(ByVal customerid As String) As SqlDataReader Dim conn As New SqlConnection(conString) Dim cmd As New SqlCommand("CustOrderHist", conn) cmd.Parameters.AddWithValue("@CustomerID", customerid) conn.Open() Dim dtr As SqlDataReader = cmd.ExecuteReader(CommandBehavior.CloseConnection) Return dtr End Function
I am having a problem running an sql stored procedure with ADO/ASP. If I hard code a select statement, the code works, but when I try to use a stored procedure it bombs. Here is my code:
THIS WORKS:
sql="SELECT PartNumber FROM Scrap WHERE DateOpened BETWEEN '20030601', '20030605'"
'Note: I already did my connection object above set rs=Server.CreateObject("ADODB.Recordset") rs.Open sql,conn
THIS DOES NOT:
'my stored procedure is LC_Top50_ByCost sql="LC_Top50_ByCost 'DB', '20030601', '20030605'"
set rs=Server.CreateObject("ADODB.Recordset") rs.Open sql,conn
HERE IS THE ERROR:
Error Type: ADODB.Recordset (0x800A0E78) Operation is not allowed when the object is closed. /MyWeb/T10_Cost.asp, line 202
Line 202 is the first line that I try to access the data in the recordset.
I'm new to asp but not new to web programming. I've been a cold fusion developer for a few years now, but due to a job changes I've had to learn asp. I'm running into a problem calling my stored procedure. The procedure runs fine in Query Analyer so I know that works, but when I try to call it using asp I get:
ADODB.Commanderror '800a0bb9'
Arguments are of the wrong type, are out of acceptable range, or are in conflict with one another.
I keep getting an error from the following SP snippet
"Line 11: Incorrect syntax near 'BY'."
It runs fine without the ORDER BY clause. [color=blue][color=green][color=darkred] >>>>>>>>>>>>>>>[/color][/color][/color] [' + @user + '] WHERE [' + @cal + '].clientID = [' + @user1 + '].userID AND [' + @cal + '].newID = ' + @userID + ' ORDER BY [' + @cal + '].myAppointment' EXEC (@sql) GO[color=blue][color=green][color=darkred] >>>>>>>>>>>>>>>[/color][/color][/color]
I am using a simple stored procedure that just searches for the cities whos name starts with the keyword enterd. But the below code dosnt seems to work. any ideas.
I am using SQL Server 2000
Code: CREATE PROCEDURE va_search_location @keyword varchar(50) AS Select * from tblcities where CityName like '@keyword%' GO
I have the Following Code, that Executes a Stored Procedure and Attempt to read a Returned Integer Value from the StoredProc.
But It gives Error ...
ADODB.Command (0x800A0BB9) Arguments are of the wrong type, are out of acceptable range, or are in conflict with one another. /C4U/DBOutputParameterTest.asp, line 25
I have a stored procedure that gets called from an ASP page. I had a requirement to adjust the stored procdure to have a delay, so now my browser waits for the stored procedure to complete before it returns the page and value I am looking for.
Is it possible to launch the stored proc from the ASP, but have it run in the background per say and return the value immediatley to the browser, cause the browser portion to not appear to be delayed?
i m trying to use a stored procedure to return one for now.. and later 2 random values from the tables. but it does not return any value and my recordset stays closed. Code:
'initialize_activity_master' expects parameter '@table_name', which was not supplied. where as i have suplied the parameter as shown in the code. Where did i go wrong ?
There's a stored procedure in the backend, does some offline jobs. Whenever i call my backend procedure from ASP, ASP waits for the procedure to be completed, only then i gain the control, I don't want that to happen, what i want is once the procedure is invoked in the backend from the ASP page, the control should be regained immediately.
I have written a stored procedure and I am trying to execute it inside my ASP page. So here is my code. It wont work at all, like when I try and open the page It times outs.
<% dim sqlrs, rs2 sqlrs = "exec SP_GET_KPI_TABLE_HEADERS" set rs2 = server.createobject("ADODB.Recordset") RS2.open SQLrs, CMS, 2, 2 %> Code:
I have a block of code that populates a recordset from a stored procedure. The problem is, the recordset seems to be forward only (which would be OK), but can't jump with the "AbsolutePage" property (which isn't OK)
How do I define the recordset that will allow this? Code:
