Syntax Error Converting From A Character String To Uniqueidentifier
I'm passing a unique identifier from page1 to page2 to page3 querried from MS SQL Server. When I pass the value, it puts the value in the curly brackets. (Page1 is for display and Page2 is for edit and Page3 is update edit)
When I go to Page3, it gives me an error saying "Syntax error converting from a character string to uniqueidentifier" {7171B9BD-4599-43D9-9521-3DA583A1BB1A} This is the value and the error page says "id=%7B7171B9BD-4599-43D9-9521-3DA583A1BB1A%7D" It seems tp put "%7B" and "%7D" for "{" and "}". Has anyone seen this?
I'm also passing numbers and text and they don't seem to have this problem, just the unique key.
View Replies
ADVERTISEMENT
if my month is represent by numbers. like 2, 4, etc
i recognize this as a string but then i want to store it as int
Microsoft OLE DB Provider for ODBC Drivers error '80040e07'
[Microsoft][ODBC SQL Server Driver][SQL Server]Syntax error converting the varchar value '2, 2, 2' to a column of data type tinyint.
/ords/asp/custorder_view.asp, line 41
u can see the varchar value to colum of data type tinyint
View Replies
View Related
I'm using Msxml2.ServerXMLHTTP.3.0 to fetch a HTML page on a remote
server. The fetched page is then parsed and the information of interest
is extracted and send to the client browser.
However, the remote server does not specify any character coding in its
headers. If using ResponseText property in ServerXMLHTTP, some
international characters are not decoded correctly. This is due to
ResponseText assuming UTF-8 coding if no character set is specified.
My solution is to use the ResponseBody property which returns the web
page as an array of unsigned bytes. I then convert the data to a string
using the ADODB.Stream method as described here:
http://www.motobit.com/tips/detpg_binarytostring/
The string is then parsed and the required information is pulled out.
This solution works just fine but I wonder if there is some more
efficient (without the need for a byte to string converion) way to
solve the problem.
View Replies
View Related
I have never run into this problem in the past. I am getting the following error:
Syntax error converting the varchar value 'Power450' to a column of data type int.
On this line:
Set grabProduct = siteConn.Execute("SELECT infoProductName FROM tblProducts WHERE infoProductID = " & distProductsArr(x))
When I output that to the screen, it shows up as:
SELECT infoProductName FROM tblProducts WHERE infoProductID = 9
The infoProductID field type is int and the infoProductName field is varchar.
View Replies
View Related
We have just upsized an Access database to a MSSQL database, our website is built using ASP/VBscript and we used to use the following SQL statement:
SELECT *, (link_url &'?ID='& ID) AS NewURL
FROM dbo.menu_mnu
WHERE visible_mnu = 1
ORDER BY order_mnu ASC
Which doesn’t work with a MS SQL database so we changed it to:
SELECT *, (url_link_mnu +'?ID='+ id_mnu) AS NewURL
FROM dbo.menu_mnu
WHERE visible_mnu = 1
ORDER BY order_mnu ASC
However this gives this error…
Syntax error converting the nvarchar value 'link.asp?ID=' to a column of data type int.
View Replies
View Related
I have a 3 page set that searches a database for users, displays the user information in a form and updates the data in the database. The first 2 pages work fine, the third page doesn't. What is annoying is that these pages are a copy of another set of pages that edit news articles (basically the same thing) and they work perfectly.
This is ASP with SQL and VB Script.
Quote: Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E07)
[Microsoft][ODBC SQL Server Driver][SQL Server]Syntax error converting the varchar value '6, 6' to a column of data type int.
/d1intranet/useredited.asp, line 72
So this message is saying that it is unable to UPDATE the field 'UserName' (which has data type INT) with the variable in the SQL code which is default as VARCHAR. Here is line 72: Code:
View Replies
View Related
I'm working on a page so that a user can change their password. I thought might be a simple update of a database, but everytime I do it I get the following error message. I've put x's where my ID would be showing for security purposes. Code:
View Replies
View Related
How do you convert Unicode into a character?
The first two examples result in a syntax error. The third example prints out the characters in the string.
ASPACE = Chr(u00A0)
ASPACE = ChrW(u00A0)
ASPACE = "u00A0"
I do realize
ASPACE = Chr(160)
works but I’d also like to be able to work with Unicode.
View Replies
View Related
I have a little script that is supposed to check for a certain value in a db column, and then do something if that particular calue is present:Code:
...<%ElseIf rsIDK.Fields.Item("my_column").Value = "/default.asp" then ...
The problem is that my_column can contain up to 300 characters, so the code above doesn't work. What I really need is a wildcard at the end of "/default.asp" but I don't really know the correct way of doing this.
View Replies
View Related
I am passing a string into a page and them looking up info to display from a database based on whats passed in. The link is www.domain.com/page.asp?variable='12345678'
Once inside the page the following code is executed Code:
View Replies
View Related
i am doing this asp programming with vbscript and came across to this problem. i need this answer asap coz i have to submit my assignment tomorrow. the thing is in the code below all the condition under the if statement works EXCEPT where i want to say that 'OrderValue' has to be between 100000 and 999999 inclusive.
it doesnt work i hv used to 'CInt' function to change 'OrderValue' Integer 'OrderValue' contains the text/string entered from the previous page that was entered in a text box called 'txtSearch'
View Replies
View Related
is any way possible to convert a string, which is a string of a number, to an integer (using VBScript). If not, are there any other solutions to have a number that is a string, and add one to increase that number?
View Replies
View Related
I am trying to populate column values from an Oracle database into an HTML "Select" control. The column in the databases is defined as number. It is not working because I think I need to convert the value from the databases into a string variable first.
View Replies
View Related
I need some advice in converting a line of string into array. For example; "001,002,003,004,005,..." into 001, 002, 003 and so on. How can I do this?
View Replies
View Related
Is there any function or some code to convert string to unicode directly or ( string to ascii and then ascii to uniccode ).
View Replies
View Related
i got some text fields im submitting by a form and i need to add the field to the current field in the table but the field is text in the table so when i do this
request.form("dkp1") + getraids.fields.item("dkp1").value
i have dkp1 = 10 from the form
and 20 in getraids field
and the above calculation it dosn add but puts them to getter as a string like 1020 and i need to calculate it to 30. my real question is there a way u can define the request.form(dkp1) to be converted from text to numberic ? and getraids of course or do i realy need to change the field type in the table ?
View Replies
View Related
can someone please tell me how to add the " character to a string
i've already tried:
<%
dim string
string = "something"
string = string & """
%>
string should equal something" but doesn't work ?
View Replies
View Related
Am collecting numerical entries from text boxes and converting to numbers using:
F1 = Round(CDbl(Request.Form("amout1")),2)
F2 = Round(CDbl(Request.Form("amount2")),2)
F3 = Round(CDbl(Request.Form("total")),2)
F4 = F1 + F2
If F4 <> F3 Then
Session("ErrorMessage") = Session("ErrorMessage") & "- Your control amounts do not tie to the Total Deposit amount.<br>"
End if
etc.
Sometimes it works, but other times, although the numbers tie out, the calculated amounts are not coming up as equal. I've written the results (F3 & F4) to the screen and they equal, although the server doesn't think so.
Is this an issue with binary number conversion or something. Should I be using something other than CRnd (Delphi has something like C$ or CCurrency)??
View Replies
View Related
What is the best way to check each character within a string?
For doing something like encryption, where you check character 1 and replace
it with a different character.. then check character 2 and replace it with a
different character.... etc.... until completing the string?
View Replies
View Related
I tried the strlen() func but to no avail. I am looping through a record set, if the length of a fields string is above a certain character count, say 50, I want to do one think, less than 50 do another?
View Replies
View Related
I have the following stored procedure:
CREATE PROCEDURE [dbo].[GET_CategoryCurrentNewsList]
@Category VARCHAR
AS
BEGIN
SELECT dbo.News_Joined.NewsTitle, dbo.News_Joined.NewsID
FROM dbo.News_Joined
WHERE (dbo.News_Joined.StartDate <= GETDATE()) AND (dbo.News_Joined.EndDate >= GETDATE()) AND (dbo.News_Joined.CategoryID IN (@Category))
END
GO
dbo.news_Joined.CategoryID is an INT, and @Category is a string such as (1000, 1010, 1020). However, no results are returned. I figured I had to do something to do some string conversions from INT to VARCHAR or something, but I can't use CSTR. I do not know how many numbers will be passed to @Category, so making seperate variables isn't an option.
Any ideas???
View Replies
View Related
I am having terrible time in converting a string to a datetime field in my asp page. I am keep on getting error on the following stateement. What would be the correct syntax on converting string to datetime for inserting into a sql table?? I did write the add_str out on the browser, everything looks correct...
Error message:
[Microsoft][ODBC SQL Server Driver][SQL Server]Syntax error converting datetime from character string. Code:
View Replies
View Related
I have an input text area on a form the max field size in the database is 255 i need to split the string at the 250 caracter?
View Replies
View Related
i have a browse button on a web form that the user can upload images via ftp. the user clicks on the browse button to browse a file on his computer and the text field displays the path - "mycomputerdesktopmyimage.jpg".
i need to get the name of the image and insert the name into my database. so i need to be able to search the string ("mycomputerdesktopmyimage.jpg") and insert all the characters after the last "" which will give me the image name. ive tried just writing out the string in asp (jscript), but it gives me "mycomputerdesktopmyimage.jpg" without all the backslashes.
how do i get those backslashes back into the string? my second question is how do i search for the characters after the last backslash? i know i can use a substring on this, but how can i use it for the last backslash?
View Replies
View Related
I have a page that will display a list of locations from an SQL DB. Users need to be able to sort and/or search these locations by industry
Each location has a 4 character desgnation, the 3rd character of which indicates industry. How do I query the DB in an ASP page to recognize ONLY the third character in the string?
View Replies
View Related
say i have a string that is "hello this is my string and i like it very
much" and i want to insert a newline at every 20th character, how could i go
about doing this?
View Replies
View Related
Is it possible to search a string for a upper case character? Here is what I am trying to do:
I have the following string:
Quote: str = "ProjectSectionPlanning"
I'm trying to break this string into:
Quote: str = "Project Section Planning"
View Replies
View Related
Would like to redirect the results of a form and pass the information in two fields ("x_amount") and ("x_description) on the form to that page.
Response.Redirect "../cgi-bin/test.asp?Request("x_amount")&Request("x_description") - this is not working.
View Replies
View Related
I am trying to display data from three tables in an MS Access database. Here is my code:
View Replies
View Related
I am working on a project using an access db. Here is the problem.
Error
Code:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing
operator) in query expression 'unit=6400s'
Unit is what it is suppose to be, I don't understand why I am getting this error? Here's the code for this part.
Code:
sql="SELECT * FROM " & tableStr & " WHERE Model=" & unitStr
tableStr and unitStr are variables. Table and unit are passed into the page and are assigned to the two variables through a request.querystring().
View Replies
View Related
This is the sql statement:
sqlquery="SELECT * FROM tblrequest WHERE Req_id= " & Req_id & " "
set rs=con.execute (sqlquery)
Req_id is coming from a form like so:
Req_id=request.form("Req_id")
The error is:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'Req_id='.
On the first line of the query.
See anything wrong that would cause this error?
Please help, the Req_id is being sent from previous form via a hidden value hope i'm requesting this properly.
View Replies
View Related
I'm having a very difficult time with an ASP page that I develpoped in Dreamweaver and the MS Access DB it's supposed to update. When I submit the data the following error appears:
Microsoft JET Database Engine error '80040e14'
Syntax error in INSERT INTO statement.
/sessiondata2.asp, line 115
I know this is usually a reserved word issue but I don't think that's the case here because the page updates perfectly when executed on my computer as a testing server.
The rest of the site updates data into the database properly so I know the connection string is working. I can't figure out what would throw an error on a live server when there isn't one on a testing server. Code:
View Replies
View Related
I am repeatedly getting the error message 'error converting datatype varchar to bit'. I am passing a varchar variable to a stored procedure (where it is also a varchar) and then trying to write it to a table (where it is also a varchar).
View Replies
View Related
