i'm trying to update a row in my Access Database by the AD_ID... i get the following error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error in UPDATE statement.
/alterantique1.asp, line 35
Here is the code:
I'm having trouble with an SQL UPDATE string updating Microsoft Access 2000 with jet engine using ASP classic. I can't see what could be going wrong, as far as I can tell it's fine. I have tried surrounding my field names with brackets [] to no avail.
The error I receive is: Code:
SQL = "UPDATE * FROM IME_request SET instructName = '" &InstructName& "', email = '" &email& "', school = '"&school&"', courseNumber='"&courseNumber&"', dateMonth = '"&dateMonth&"', dateYear = '"&dateYear&"', dateDay = '"&dateDay&"', description = '"&description&"', instructDesign = '"&instructDesign&"', techranger = '"& techranger & "', IP= '"&IP&"', completed = '"&completed&"', feedback = '"&feedback&"' WHERE courseNumber='" &courseNumber&"' "
I have a form that I want to update my database. I am receiving an error that reads:
Syntax error in UPDATE statement.
I'm trying to update my counter in DB (Access) using sql query but the following error appears
Microsoft JET Database Engine error '80040e14'
Syntax error in UPDATE statement.
/cms/modules/test.asp, line 14
How could i solve this problem, here is sql query that i'm trying to run
sql = "UPDATE articles SET counter=counter+1 where (((aid) ="&aid&"))" .
What am I doing wrong with my Update statement in with
javascript? Code:
I am getting a syntax error on my SQL statement, not sure if I am doing this
right. i am trying to pass a value from another form.
strsql = "select PrinterModel, PrinterName, IP_Address, Location from
Printers where PrinterName = ' & <% =Request.Form(npName) %> & ')"
I'm having a very difficult time with an ASP page that I develpoped in Dreamweaver and the MS Access DB it's supposed to update. When I submit the data the following error appears:
Microsoft JET Database Engine error '80040e14'
Syntax error in INSERT INTO statement.
/sessiondata2.asp, line 115
I know this is usually a reserved word issue but I don't think that's the case here because the page updates perfectly when executed on my computer as a testing server.
The rest of the site updates data into the database properly so I know the connection string is working. I can't figure out what would throw an error on a live server when there isn't one on a testing server. Code:
strQuery2 = "Update tbCard_Temp Set tbCard_Temp.Id='tbCardSwipe.Id
From tbCardSwipe'"
and i get this message
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing
operator) in query expression 'tbCardSwipe.Id From tbCardSwipe'.
The following error is appearing
Microsoft JET Database Engineerror '80040e14'
Syntax error in UPDATE statement.
/TestUpdate4.asp, line 111
with the following page. Been told has something to do with Field Names?????
Now I know I posted this elsewhere twice but no one seems to even be looking at them. I really am stumped by this problem.
I recieve the error:
Microsoft JET Database Engine error '80040e14'
Syntax error in INSERT INTO statement.
/quizmaker/admin/create_teacher.asp, line 20
DIM mySQL
mySQL = "INSERT INTO users(user, password) VALUES('"& uname &"', "& pword &")"
USERS1.open mySQL , objConn <----- Line 20.
Syntax error in INSERT INTO statement.
Please download the attachment and unzip it.
I have 4 files:
Starting with "signup.asp" - fill up the registration form. this will forward you to next form.
"signup_process.asp" - process the filled form
"signup_success.asp" - indicate that register successfully
"Database.mdb" - the database file (MS Access 2000 format)
My problem occurs in "signup_process.asp".
The error message found in IE:
Error Type:
Microsoft JET Database Engine (0x80040E14)
Syntax error in INSERT INTO statement.
/myweb/signup_process.asp, line 31
I look through my code, but found no mistake.
But why still I cannot add the information in the form into the "Database.mdb"?
I've see this error message when I try to submit my form..
Help with Syntax error in INSERT INTO statement. line 153
Here's the SQL Code:
My Code is as follows, im basically trying to get the value from a radio button from another page for a vote, take the value thats allready in the table add 1 to the value and then insert it back into the database, then create a voted cookie and redirect back to the same page to view the vote results. Code:
View Replies View RelatedI keep getting the same error... Syntax error in INSERT INTO statement. (line 14) Code:
View Replies View RelatedAny idea's what's wrong with this statement?
sql_insert = "insert into Specs (ItemID, Title, Value) values ('" & _
ItemID & "', '" & Title & "', '" & Valuesa & "')"
It returns.
Syntax Error in INSERT INTO statement.
Does this have something to do with using "Value" as the field name?
I am trying to modify and update a column in the access dB by using a form on the first page, and then the update sql statement on the second page.
For some reason the error its throwing at me is this
Microsoft JET Database Engine error '80040e14'
Syntax error in UPDATE statement.
/willdata/password.asp, line 34
When I use the same update statement directly into the access dB it works, if I even hard code in values in the ASP page I still get an error - I now cannot see for looking: Code:
Usually on our server we see or can view source to see where in the INSERT statement something got messed up. I have debugging on but when I run a test, I get the following error:
Syntax error in INSERT INTO statement.
Line 57
It is a very long INSERT statement but for the life of me, I can not see where it is wrong. What I am wondering, if all I am seeing is "Syntax error in INSERT INTO statement. " does this mean it is at the beginning of the statement since i do no see any of the actual data on the error page?
I am trying to run a simple update statement through asp and for the life of me can't figure out why it isn't working. I was wondering if anyone could look at this and tell me what may be wrong: Code:
View Replies View RelatedI have this insert statement where instruction field in the DB is a memo field.
SQL="INSERT INTO int ([instruction]) VALUES " & _
"('"&Request.Form("myTextarea")&"')"
objConn.Execute(SQL)
Its giving me error:
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement.
ASP error number 13 - Type mismatch with SELECT...FOR UPDATE statement. I got ASP error number 13 when I use the SELECT...FOR UPDATE statement as below. However, if I use SELECT statement without FOR UPDATE, it is fine and no error. I also tried Set objRs = objConn.Execute("SELECT * FROM EMP UPDATE OF EMPNO"), but it still couldn't help.
Here's the code fragment: ....
I'm using the following Insert statement which is giving me an error.
query="Insert Into "& CurrentSeason() &" (pkDate, Players(Goals)") Values (#31/12/2004#, '"&strOpponent&"')"
cnDB.Execute(query)
I think this is occurring as one of my field names has brackets in it. Can someone please tell me how I can adjust the syntax of my insert statement so it allows me to include brackets? Is it possible as I have played around with the syntax and received syntax errors.
tell me the syntax for using like in an if statement? I am using an access database and asp. I want to look for a single character in a database field. I tried to use similar syntax as in SQL select statement?
<%if l_rstNews("highlighted") like .... then%>
I am trying to update my database with hidden fields that are being requested from a previous page such as:
hfSectionOneScore
hfSectionTwoScore
hfSectionThreeScore
I'm not familiar how to write an UPDATE statement, and would like some help. I'm thinking that it is something like this:
UPDATE Director_Appraisals SET
Section1Score = request("hfSectionOneScore"),
Section2Score = request("hfSectionTwoScore"),
Section3Score = request("hfSectionThreeScore"),
WHERE UserID = request("hfUserID");
Of course there are more columns, but am I on the right track? Does the syntax look correct?
Code:
MySql="UPDATE country SET country.country_name='" & country_name & "'
WHERE country.country_id =" & country_id & ";"
Hi,
My question relates to the quotes in the above query. I was able to find my probem by searching the forum, but I am interested in knowing why I must use single quotes around the following: Code:
country.country_name='" & country_name & "' ....
I have been trying to do this code but I cannot make it works. Could you help debugging the code.I dont know if the code is in the correct syntax or not.
I place this code at the top of all my page to check an invalid user that are trying to access the page without logging in. When they are success, I want to update a field to store the current time ("LastActive" field)
When the user login, I ask for their Username and password!and then, reffering to this username, update the LastActive field.
I think I know what I want to say, but don't know the proper syntax. I want to redirect the user to a new page if the referrer is ANYTHING but one particular page (/index.asp)
Code:
<%
If instr(Request.ServerVariables("HTTP_REFERER"), IS NOT EQUAL TO /= "www.sheridan.edu/index.asp") Then
Response.Redirect("/index.asp")
End If
%> .
May I know what is the syntax to copy multiple records to a single record? login_userid is in string.
sql =" UPDATE user, leave_summary_temp SET user.l_annual_taken = leave_summary_temp.l_annual_taken
sql = sql & " WHERE user.login_userid = leave_summary_temp.login_userid "
conn.Execute( sql )
Let's say in user table
login_userid | l_annual_taken
steve | 0
and in leave_summary_temp
login_userid | l_annual_taken
steve | 2
steve | 1
steve | 4
So, after the copy, the result in user table should be
login_userid | l_annual_taken
steve | 7
with the syntax below wouldn't it update all acct stats with the name potential client
where before the values were set to 0? Am I writing this correctly? User_info is the table and i don't know whether or not if it goes in there. update user_info set acct_stat Potential Client where acct_stat = "0";
I have to do an ASP script that updates some columns in four MS Excel files, based on the SQL Server data. For 2 days I have an error :
Microsoft OLE DB Provider for ODBC Drivers (0x80004005)
[Microsoft][ODBC Excel Driver] Syntax error in UPDATE statement.
This is the code I use for the update statement:
I am trying to run a update statement to update a Microsoft Access database. Can memo fields be updated with ASP. I keep getting an error when the statement gets to the memo field?
View Replies View RelatedI started here only it doesn't work with single quotes in the name. It does work if there are no single quotes.
strSQL = "select * from Members WHERE co_name = '" & request("coname") & "'"
I get this error Microsoft JET Database Engine (0x80040E14)
Syntax error (missing operator) in query expression 'co_name = 'aa'a aaa'aa''
So I tried this:
strSQL = "select * from Members WHERE co_name = '" & replace(request("coname"), "'", "''") & "'"
It kind of works but stops outputing at the first space it encounters. It works good if there are no single quotes in the name. I'm writing the output to an input box.
In fact here is the code for the input box:
Response.Write "<td><input name=coname tabindex=5 value= '" & objRs("co_name") & "'></td>"
chk whether i write correct or no..Code:
SQL_query1 = "update Activity_Status set TotalTime = '" & Request.Form("time") & "', Score = '" & Request.Form("QuizScore") & "' where UserID ='" & Request.Form("username") & "', ActivityName = '" & Request.Form("QuizType") & "'"
I have no problems with a single "Where" clause, but I'm not exactly sure about my syntax when it comes to another part to my "Where" clause. Here is my statement:
conn.execute= "UPDATE STUDENT_INFRACTION_ACTION Set ACTION_NO = '" & ActionNumber &"' WHERE INCIDENT_NO = " & Request.Form("txtIncidentNumber") "AND STUDENT_ID = " & Request.Form("txtStudenID")
I'm receiving the following error:
Expected end of statement
/Development/Discipline_Form_Admin_Action_Submitted.asp, line 61, column 144
I've highlighted position of the error in my statement, but I'm not sure if I need the second set of parenthesis in my statment or not.