Syntax Error (missing Operator) In Query Expression
1) I'm getting this error: Syntax error (missing operator) in query
expression on the below statement. Can I get some advice.
2) I searched ASPFAQ and came up blank. Where can find the "rules" for when
and how to use single quotes and double quotes in ASP? Code:
View Replies
ADVERTISEMENT
I'm getting this error:
Error Type:
Microsoft JET Database Engine (0x80040E14)
Syntax error (missing operator) in query expression ''I'm not really sure what all that stuff means. Do you have the divider pages with the tabs to stick in and organize things? If so i'll take 10 of those too. Thanks.''.
/employee_forms/testing/databaseclerical.asp, line 60
when running this code: .....
View Replies
View Related
I'm getting this error:
Error Type:
Microsoft JET Database Engine (0x80040E14)
Syntax error (missing operator) in query expression ''I'm not really sure what all that stuff means. Do you have the divider pages with the tabs to stick in and organize things? If so i'll take 10 of those too. Thanks.''.
/employee_forms/testing/databaseclerical.asp, line 60
when running this code: ....
View Replies
View Related
Any ideas why im getting this error from these lines of code?
" WHERE [Personnel].p_id = [specialists].[p_id] " & _
" AND*[specialists].spu_id = " & Cint(Request.form("spec"))
View Replies
View Related
valuA = (request.form("toadd"))
If valuA = "" then
SQL = "UPDATE CourseReg SET attended='Active' WHERE ID
IN("&request.form("toadd")&")"
Set RS = MyConn.Execute(SQL)
End If
MyConn.Close
Set RS = Nothing
Set MyConn = Nothing
the error
syntax error (missing operator) query expression ID IN ()
View Replies
View Related
First time poster here but I've spent a while lurking and reading the great threads here
I've got a problem that I've wrapped my head around for a few days and I can't seem to figure it out.
Im using ASP with Access 2000 DB. I want to perform a simple lookup by ID (AutoNumber in Access) and it says I am missing an operator. Code:
View Replies
View Related
I am trying to insert values into a database using an sql statement that i read from a table that contains all my different sql commands. The sql statement is stored in the following way in the table: Code:
View Replies
View Related
I am recieving the Microsoft JET Database Engine (0x80040E14) Syntax error (missing operator) in query expression when updating data that contains single quote marks, for example: Code:
View Replies
View Related
I'm trying to pass a piece of data i get from a query using a different form's passed values. This is how I get the data into the new form and how I try to pass it to the next asp page query.
<td valign=TOP width="168"><form action="HouseDetail.asp" method="post" name="MLS" id="MLS"><input name="MLS" type="hidden" value='<%=oRs("ML_Number")%>'><input name="Submit2" type="submit" value="Get Details"/></form></td>
The value='<%=oRS(ML_Number")%>' generates a real value like '2403943' - and the field I'm trying to use this value in the qry is expecting a number. But even passing the number without the single ' at both ends generates the same error message. Code:
View Replies
View Related
I am working on a project using an access db. Here is the problem.
Error
Code:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing
operator) in query expression 'unit=6400s'
Unit is what it is suppose to be, I don't understand why I am getting this error? Here's the code for this part.
Code:
sql="SELECT * FROM " & tableStr & " WHERE Model=" & unitStr
tableStr and unitStr are variables. Table and unit are passed into the page and are assigned to the two variables through a request.querystring().
View Replies
View Related
i have a drop down list that populates a table based on the user input. The table than has some products, I'm trying to have the product name link to another page with full details about the product. I'm close but just need some help with the sql. The sql is:
"Select * FROM tablename WHERE ID =" & request.Form("ID")
ID is defined as autonum in the database, the error message i'm getting is:
Syntax error (missing operator) in query expression 'ID ='.
View Replies
View Related
This is the sql statement:
sqlquery="SELECT * FROM tblrequest WHERE Req_id= " & Req_id & " "
set rs=con.execute (sqlquery)
Req_id is coming from a form like so:
Req_id=request.form("Req_id")
The error is:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'Req_id='.
On the first line of the query.
See anything wrong that would cause this error?
Please help, the Req_id is being sent from previous form via a hidden value hope i'm requesting this properly.
View Replies
View Related
to search based on the beginning characters the sql should be
sql="SELECT * FROM Employee Where Emp_Id Like '" & strId & "%'"
View Replies
View Related
I'm working on a page so that a user can change their password. I thought might be a simple update of a database, but everytime I do it I get the following error message. I've put x's where my ID would be showing for security purposes. Code:
View Replies
View Related
I am trying to execute the following SQL Statement:
SqlApp1 = "INSERT INTO LeagueStore (Team, Played, Wins, Loses, Draws, For, Against, Points) SELECT (Team, Played, Wins, Loses, Draws, For, Against, Points) from HomeWins WHERE postponed=''"
But i am getting the following error message:
Syntax error (comma) in query expression '(Team, Played, Wins, Loses, Draws, For, Against, Points)'.
And i dont know why. All of the fields are numerical apart from TEAM is that helps.
All i want to do is Insert data from one table into another but i cant use SELECT * because one table has one extra field to the other and when i tried to amend the SQL to look like this:
SqlApp1 = "INSERT INTO LeagueStore (Team, Played, Wins, Loses, Draws, For, Against, Points) SELECT * from HomeWins WHERE postponed=''"
i get this error:
Number of query values and destination fields are not the same
View Replies
View Related
i keep getting this error in this script on this line in display-course.asp
sql= "Select * from course_data WHERE Course_Id="&course_id &" ORDER BY Course_Date_From"
course.asp
Code:
View Replies
View Related
iam trying to insert some data into a database but i keep getting the above error msg this is the line that is causing the problems any ideas?
Code:
sql3 = "Insert INTO course_dates ([Course_Id], [Course_Heading], [Course_Title], [Week_No], Status) VALUES ("&courseid&", "&course&", "&title&", "&weekno&", "&status&")"
here is what is printed when I response.write the sql3 statement
Insert INTO course_dates ([Course_Id], [Course_Heading], [Course_Title], [Week_No], Status) VALUES (285, NEBOSH, test, Week One, TBA)
View Replies
View Related
my SQL keeps coming back with the following error
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'Clients.Area_ID = 3 AND Clients.Category_ID = 7 OR WHERE Clients.Category_ID = 7 AND Clients.All_Areas = true'.
I am trying to pull out all records where area and category match, aswell as all records where category match and all_areas = true
Any suggestions as to where I am going wrong?
Code:
View Replies
View Related
I have 6 textboxes where if I fill them up I want the query to search if either one of them has results found. I have this but it's not working: Code:
View Replies
View Related
I need to parse the following:
aaa_bbb_d_yyyy_mm.ext
aaa = ITM, CPF, FAC, GEN
bbb = almost anything (even more then 3 chars)
d = M,Q,Y,R
yyyy = year
mm = month
I'm terrible at figuring out regexp so I turn to the kind folk of SP
View Replies
View Related
is it possible to have a replace() function in an SQL query? I need to use
something like that to be able to sort my "sequential-numbers", which are
actually textfields like this:
98.1
98.10
98.2
98.3
98.4
What I want is to query these numbers, convert them by removing the dot with
the replace command and the sort the recordset on it.
Is this possible?
View Replies
View Related
I had developed a messageboard in asp which allows users to post new messages,reply to existing messages.I am using textarea (Html tag) for a messagebox in my asp page .When the user enters any characters in messagebox except a single quote ('),the message gets inserted in oracle database without any problem.But if message contains single quotes (') , while inserting in a database it gives the following error
"Microsoft OLE DB Provider for Oracle error '80040e14' ORA-00917: missing comma ".
Is there any solution to insert messages containing single quotes in a database?
View Replies
View Related
I just decided to leave Mssql and start using Mysql. I am having some problems with my queries; is there anyone here who has a knowledge of query syntax in Mysql?
View Replies
View Related
Is it possible to use IIF function in SQL query?like that for example:
objCommand.CommandText = "Select WCUST, IIF(Sum(WQTY2002) Is Not Null, ((Sum(WQTY2003)-Sum(WQTY2002)) * 100/Sum(WQTY2002)),Null) AS ChangeUnits, IFF(Sum(WAMT2002) Is Not Null, ((Sum(WAMT2003)-Sum(WAMT2002)) * 100/Sum(WAMT2002)), Null) from tabTest group by WCUST;"
View Replies
View Related
I'm having a problem With Query5, inserting the 'HF' variable into the DB, PF and HF both print out correct values when asked to do so. I think its a problem with my SQL query syntax but i'm at a loss as to what could be wrong.
The Error the Browser sends is - "Expected end of statement" Code:
View Replies
View Related
Would like to redirect the results of a form and pass the information in two fields ("x_amount") and ("x_description) on the form to that page.
Response.Redirect "../cgi-bin/test.asp?Request("x_amount")&Request("x_description") - this is not working.
View Replies
View Related
Where I found this?
Like this:
SELECT
SELECT TOP N
INTO
FROM
WHERE
GROUP BY
HAVING
UNION (ALL)
ORDER BY
WITH OWNERACCESS
( http://msdn.microsoft.com/library/e.../access2sql.asp )
But with explanations (usage) and samples...
View Replies
View Related
I am using Windows 2003/IIS 6. The following event occurs during the day. i
want to debug the culprit ASP page which is causing this, but having hard
time without knowing on what page and website where the error occurs.
May anyone have any idea:
1)how to change the server configuration so it will log the page, or
2) is the error log stored elsewhere (i checked
onWINDOWSsystem32LogFilesHTTPERR, but it logs different sort of errors),
or
3)is there another way to log only errors (we have an internal error
monitoring system, but this error seems to escape it. maybe it's on
global.asa)? Code:
View Replies
View Related
I am trying to display data from three tables in an MS Access database. Here is my code:
View Replies
View Related
I'm having a very difficult time with an ASP page that I develpoped in Dreamweaver and the MS Access DB it's supposed to update. When I submit the data the following error appears:
Microsoft JET Database Engine error '80040e14'
Syntax error in INSERT INTO statement.
/sessiondata2.asp, line 115
I know this is usually a reserved word issue but I don't think that's the case here because the page updates perfectly when executed on my computer as a testing server.
The rest of the site updates data into the database properly so I know the connection string is working. I can't figure out what would throw an error on a live server when there isn't one on a testing server. Code:
View Replies
View Related
What's wrong with the following code?
Set objRS = server.createobject("ADODB.Recordset")
strSQL ="SELECT Content FROM thread WHERE ThreadID='"& strQuoteID &"'"
objRS.Open strSQL,objConnection,3,3
I get this error:
Data type mismatch in criteria expression
View Replies
View Related
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14)
[Microsoft][ODBC Microsoft Access Driver] Syntax error in FROM clause.
----------------------------------------------------------------------------------
Yes, I know this question has been answered a million times, however, I've already searched through this forum and my problem still hasn't been resolved.
Basically, I keep getting the error above whenever I try to execute this code. This code is from a search page entitled search.asp.
Here's my code:
View Replies
View Related
What does this error means? 'Syntax Error From Clause'.
View Replies
View Related