Text Field
How i can get a text field that would accept apostrophes?
here's my code:
Title = Replace(Request.form("AddTitle")
Message = Replace(Request.form("AddMessage")
Author = request.Form("AddAuthor")
TimePosted = request.Form("AddTimePosted")
DatePosted = request.Form("AddDatePosted")
sql="INSERT into NEWS (title, message, author, date_posted, time_posted) "
sql = sql & "VALUES ('" & Title & "', '" & Message & "', '" & Author & "', '" & DatePosted & "', '" & TimePosted & "') "
Conn.execute(sql)
Response.write sql
View Replies
ADVERTISEMENT
i am using ASP with recordset I am using nvarchar field and TEXT field in ms sql server
i update it as follows
rs("thenvarcharfield") = request.form("somedata")
rs("thetextfield") = request.form("someotherdata")
rs.Update
at one page it works fine and when i use the same kind of code to update another TEXT field it doesn't update and the I.E. loading bar increases very slowly and the next page never loads someone suggested to use .appendchunk i used rs.appendchunk and i got the error "object doesn't support this property or method" he also said that .appendchunk cannot be used to update nvarchar.
i removed the code to update TEXT field and the page loaded as expected (normally)!
Why one text field worked fine while the other didn't?
View Replies
View Related
I need help regarding the string. In HTML page i have a text field to enter Name. How do i check whether its valid name or not, on the server side.
View Replies
View Related
I want to create two radio button
Yes and No. Only on select that radio button 'Yes',
the text field should get enabled.
How to do this?
View Replies
View Related
i have a table in which i have many text boxes, they are named as a1,a2,a3,a4 to a16 the next row is b1,b2,b3 to b16 and so on up to G1,G2 etc, where the user enters his data, what i want to do is only allow the user to enter numbers, which can have decimals if required,
how can this be done, also i have another set of textboxes through which i want to loop and prevent user the user from entering the same data in more then one box how can this be done any help will be appreciated thank you.these are the text boxes a1,b1,c1,d1,e1 etc which is actually the first column in the table.
i have created the following array:
letterArray[0] = 'A'
letterArray[1] = 'B'
letterArray[2] = 'C'
letterArray[3] = 'D'
letterArray[4] = 'E'
letterArray[5] = 'F'
letterArray[6] = 'G'
how can i loop through to achive the above.
View Replies
View Related
May I know how to restrict the user to key in at least 6 characters from the text field by using asp? If possible
View Replies
View Related
I am trying to write some code that inserts or updates a text field in my SQL Server 2000 database. The SQL statement is created using a submit from a form, and the text is coming from a <textarea>, and therefore being placed into the SQL statement via a Request("field"). However, due to limitations in SQL Server 2000 and text fields, I can not use a simple Update or Insert command with text over 8000 bytes.
Does anybody have any sample statements that will help me update that field with larger amounts of data? I have tried using the WRITETEXT function and UPDATETEXT function with little or no success.
View Replies
View Related
i have a form that has two hidden fields.The first hidden field will has a value like this 'EM12HILL.JPG'.The second hidden field has a value like this 'AA01'.What i would like to happen is when submit button is pressed, the characters in the first hidden field will change to the following 'AA01HILL.JPG', as they are passed to another form.
View Replies
View Related
How do I clear the data in this field before using the date function.?
<input type="text" size=35 name="DepartCentralDate" value="<%=x_DepartCentral %><%= FormatDateTime(Date, 1) %> <%= FormatDateTime(Now, 3)%>">
View Replies
View Related
Is it possible to recall a variable with the combination of text + rs.field? i want to recall the variable "speler1", at the place weher rs("speler") is 1. It's probably again easy.
View Replies
View Related
I been searching google but I can't find how to shorten a text field and if it has been shortened to place a space and triple dot (...) after it. So if the text field was 75 characters long it would shorten it to 50 and add " ...". Is it also possible to shorten it to 50 to the nearest word? This is what I got so far: Code:
...
<td>
<p>
<% = left(rs("my_text").value,50) & IF rs("my_text").count > 50 Then Response.Write(" ...") End If %>
</p>
</td>
...
View Replies
View Related
In a form I have one pulldown menu, and one text field. Both MUST get their values from an Access database they connect to. Without submitting the form, how do I change the value appearing in the text field by changing the selection in the pulldown menu? Remember both the text field and the pulldown menu MUST get their values from a database.
View Replies
View Related
I need a user to follow a format. For example entering a date. I need the user to enter a date in this format MM/DD/YY. How do I check to see if they followed that format?
I need the user to enter a currency amount without the "$" sign. How do I check to see if the Request.Form("price") value has a "$" sign in it? I guess I need to know how to parse a string in ASP.
View Replies
View Related
Is it possible to make the following codes Value = idSpecies but its Label TimberSpecies?
<input name="f1" type="text" id="f13" value="<%=((rsResults.Fields.Item("idSpecies").Value))%>" size="33">
I have a database with the following...
Table Name.....Query1
Field Name......idSpecies..........Auto Number
Field Name......TimberSpecies...Text Field
View Replies
View Related
I have an asp page that allows cdont mailing of form field values to persons matching slected criterea in their profile.
Works good if the user goes straight from the form to the email-making asp.
Then the user asked for a proofreading screen and what seemed simple took a bad turn.
When I try to pass from the proof reading screen to the asp that actually sends the email I only get the first word. as soon as a blank is encountered in the text it thinks it it done. Code:
View Replies
View Related
i have a formular using two text field. i want , when i finish writnig , moving to the next using " Enter " key.
View Replies
View Related
how to lock down a text field so that data displayed within it cannot be altered?
View Replies
View Related
I want to search text field and highlight the text. This is the code,
Code:
strText = cstr(Request.form("strText"))
strText = uCase(strText)
strTextWhere = ""
strTextWhere = " and (Specialisation
like '%"&strText&"%') "
I have a lot of data in different cases. I can do the search, let say i want to search by keyword project, it will display all the "project", "Project" and "PROJECT". But now i can only hightlight the "PROJECT" only. I think this is because of ucase(strText). Is there any way for me to highlight all (either lower, upper and mixed cases)?
View Replies
View Related
Is there any way I can pass the value in a disabled text field without creating a hidden field?
View Replies
View Related
I need to make a text field equal to the entered value. Example: First time to the page nothing will show up in the field because nothing was entered. I enter a value and submit the form. The redirect is to the same page to add new inforation but this time the value entered in that one text field will be there. I tried <%=Request.Form("box")%as the value of the text field but to
no success.
View Replies
View Related
I have a DSN connection for MySql with Asp. Used Text
field[Memo] to store the data. While displaying the data
its gives the error,if field is empty. But works well if
not empty. So pls help me to check the text/memo field
for empty/null. How?
View Replies
View Related
I am using text fields to display data from a table in access in an ASP file, i am using text fields because if i used anything else, like labels the info was not updated to the table correctly.
Does anyone know how to input of edits to a text field so that the user can view the data in it but cannot remove or change it?
View Replies
View Related
I'm looking for a script or direction to help to find a script (maybe java?) that will validate an email based on comparing it to another email text field. So when one enters an email and then "confirm email. The two entries must match. This form is .asp. This should be client side validation and not through my server.
View Replies
View Related
i'm trying to figure out why i can not update a record if in the text box there is a ' anywhere in the field..
View Replies
View Related
I have a page with a drop down box and a text field. The drop down box selects a column from a table in my database. txtField is the drop down box and txtSearch is the text field.
The form method is post and the results are passed to the next page which has the query for the database as shown below. Anyone any ideas why I get no results from the query? It works in queryanalyzer so I assume its my asp thats wrong? Code:
View Replies
View Related
I was wondering if someone could help me with finding out how to populate a drop-down box with values queried from a database.
Also, I was also wondering if someone could help me with figuring out a way to place field-values retrieved from a table into a text field. This would be for the purpose of editing a record that has previously been entered.
Placing the information in a texbox field so that the user can easily type over it seems like the best thing to do.
View Replies
View Related
i know in html you can set a "max" character limit for a form field.I was wondering if it is possible to set a min number of characters?
View Replies
View Related
I'm trying to write a web form that will allow users update info from a database table. Everything is working fine, except the display of the one text field from the database (nothing displays. Here's what I'm trying:Code:
<textarea name="AdditionalInformation" cols="32" rows="10" wrap="VIRTUAL"><%=(UpdateRecruiting.Fields.Item("cs_additionalinformation").Value)%></textarea>
what I'm doing wrong?
View Replies
View Related
I want to create some text input fields which they should all have the same size regardless the browser version or type. Because my text input field looks different in size if I view them from a different computer. Is the following coding should solve the problem?
<input type="text" name="field" value="" size="30" style="width:300px;">
Is the best way to use CSS to control the size of a text input field?
View Replies
View Related
i have a software capable of building a Search engine with no programming skills needed well, the app works great, but i want it to validate when the search box is empty (no user entry).
Tha app generates 3 files : search.asp which calls the other two files, webdata.asp and searchfunc.asp, the webdata file gathers all the keywords of the site adn the searchfunc file is the one that does the remaining job. I wannna tell the user when he left empty the search box, so i go to the searchfunc.asp file and write thie:
if request("searWords") = ""
msgbox ("you left empty that entry, please try again")
end if
But when i try it on my server it gives me the error 500. I don't know what to do i just want to validate that simple thing. I attacha the 3 files mentioned above.
View Replies
View Related
how to i passing values to text field?
<input type="text" name="Usrname" size="20" value=<%= fullname %> >
i knew this is wrong.. but how do i solve this problem?
View Replies
View Related
I have a memo field in my recordset that will have varying amounts of text inserted into it from an online form. This is then uploaded to a table cell. At the minute it is just going in one long line across the table. How can I get this text to wrap or line break at a table width of say 500px. Is this an html or asp solution?
View Replies
View Related
I have a VBScript function:
<script language="VBScript" type="text/vbscript">
Function Main()
set wshshell = createobject("wscript.shell")
struser = wshShell.ExpandEnvironmentStrings("%USERNAME%")
strdomain = wshShell.ExpandEnvironmentStrings("%USERDOMAIN%")
msgbox struser & strdomain
End Function
</script>
That works great as a Active X script but I want this to display as a value in a text field and I can't find how o do that.
View Replies
View Related
