I know this is probably simple, but I'll ask anyway.
I have a form which when submitted to the database the field in the database
automatically adds date and time which is fine. My only problem is that my
site is for the GMT UK time zone, but the database resides on a American
server, IE the database records the local American time (-5 hours
difference)
New to ASP,JScript,VBScript.I have a server in one time zone and a client in another. The ASP reads time from the server.I need capture the time on the client and use that in the server code.
View Replies View RelatedIs there an asp component anywhere which will convert a GMT time in the past
to a different time zone e.g. EST?
You can't just take the hours off as there is often daylight saving hours to
take into consideration.
I got a problem solving on how to convert the following time zone all into EST. My server is currently in EST but i need to convert the following time zone [PST,MST,CST] all into EST given all the exact time. eg 09:00 AM PST, 1:00 PM MST, 2:00 PM CST etc etc.
PST to EST
MST to EST
CST to EST
I've been working for this a week now and i hope somebody will give me sample code
I have run into a bit of a time zone problem. Basically, I am using ASP and Javascript to handle dates and guess what... you got it, the client could be in any time zone but the server will always be in the same one (UK actually).
I have figured the best method would be to use Javascript to determine the GMT offset (.getTimeZoneOffset), then pass that to my ASP script (I am already doing Javascript->ASP work, I am just appending this to the end of the querystring). ASP will have two dates then, the server date and the client date, and then the client GMT offset. Once I get this offset in ASP, how can I use that with the dates/times I am working with?
I'm using brinkster, and am trying to change the Time Zone, 5 hours forward to London UK time, and also, reduce the rime by 7 minutes, as their server is off by that many minutes - I asked them to change it, the said no, it's correct, but I synchronse time with time.windows.com and the time was 7 minutes behind from brinkster.
You may think I'm being a pain, but on my site, the products I add are time dependent and people need to know the exact time. the code is below, of course, with everything I try, I get an error, can someone please figure out my mistake. Many thanks + Happy new year every1
Code:
<%=(DateAdd("n",-7,now()))(DateAdd("h",5,now()))%>
I am attempting to solve a date/time formatting issue is
VBScript ASP pages. The ASP pages needs to determine what
time zone the client browser is in and tell a COM object.
The COM object then reads information from a proprietary
file and formats the date/time into the appropriate time
zone and returns the information to the ASP in an XML
form.
My question is how do I determine the client's time Zone
using VBScript in ASP pages?
I was wondering if anyone knew how to determine how to determine the
client's time zone from within an ASP page?
how to either change the time zone or add three hours to the following?
View Replies View Relatedi can use this to change the time on my site by +2 hours:
offsetminutes=120
thetime=dateadd("n", offsetminutes, time())
but, say it's 11pm.. the script above will make it 1am, but will the date in " date() " go ahead one day too?
the other thing i could do is this:
offsetminutes=120
thetime=dateadd("n", offsetminutes, now())
using now() instead of time(). but then when i want to print " thetime " onto a page, ill get something like "7/11/2005, 5:10:13 PM". how could i then separate the new date from the new time and print them to a page separately?
Is it possible to add a domain name to trusted zones from an ASP page?
View Replies View RelatedIs there a way to detect if the servers domain is added to the user's trusted zone?
View Replies View RelatedI would like to display the difference between the logging time
[Session("start"] and the current time [now]. In hours minutes and seconds,
I have tried a couple of things but all I see is gobbledy gook.
I have a website that I subscribe to that allows me to track tasks. I have an extra computer with a big monitor that i want to always display the task list. the problem is after so many hours I get logged out.
I need to need to reload that sign in url every few hours Code:
there i was just windering how do i compare a date/time vlaue in sql server agaisnt the computers' date/time.
for example, if computer date/time is two months or 2 weeks before the database date/time do something
Currently working on a ASP for a friend, which requires the date and
time on it. It pulls in entries from an Access Database with dates and
times in the format of:
"Fri Oct 17 18:02:46 2003"
However my date and time on the ASP page is displayed as:
"Friday, October 17, 2003 18:02:46"
using the script:
"<%Session.LCID = 1033%>
<%=FormatDateTime(Date(), vbLongDate)%>
<%Session.LCID = 2057%>
<%=time()%>"
Anyone know how to change this script, fully or partly to produce the
date and time on the format that's in the access database i.e. "Fri Oct 17
18:02:46 2003" Code:
I am working on a database that collects information about incidents. One of the fields that people enter is the time of the incident. I am trying to convert that string that people enter into a OdbcType.Time and I am at a lost.
View Replies View RelatedHow will we convert the system date & time to other timezone for eg: Eastern Time zone using ASP?
View Replies View RelatedWhen the Form is submitted I use the Date() and Time() functions to put the date and time into the Body part of the e-mail. The time reported is three hours earlier than the time at which the Form is actually submitted.
I understand these functions are evaluated on the server so the server must be in a time zone three hours earlier than where I am . Is there any way I can get the local time at the location where the user is actually located. ?
Any some tools or sample codes drop down asp script execute time and
database connection time ?
I'm trying to do a very simple code that converts the server time into a time zone of your choice.
<%
dim h 'Current Hour
dim i ' Time Zone Increase - add or subtract hours
dim r 'Result Here
h = Hour(Now)
i = + 2
r = h + i
%>
but obvisouly i'm having trouble with the time zone convert.
I am trying to compare the NOW time with a "deadline" time. Please help. Just not sure why this is not working. I need to be able to say IF IT'S BEFORE 9:30 TODAY, IT'S OKAY TO ADD SOMETHING. IF IT'S AFTER 9:30 TODAY, YOU MUST ADD IT TOMORROW.
CODE:
nowtime=now()
deadlinetime=formatdatetime(now(),2) + " 8:30:00 AM"
response.write "NOW: " & nowtime & "<BR>"
response.write "Deadline: " & deadlinetime & "<BR>"
if nowtime<deadlinetime then response.write "can send out today" end if
if nowtime>deadlinetime then response.write "must send out tomorrow" end
if
RESULTS:
NOW: 1/18/2007 8:51:43 AM
Deadline: 1/18/2007 8:30:00 AM
can send out today
As you can see, NOW is GREATER THAN Deadline, so it should must send out tomorrow.
i want to calculate the total time between to dates and time.
Example: Total time elapsed from date 1 time 1 to date 2 time 2.
27/09/2004 11:00 - 28/09/2004 10:30
The user enters a record and then later comes back and closes it. I need to know the time it took from when they entered the record until the time it was closed.
i am trying to get a time variable which is 30 minutes before the current time to use in a calculation.
The code I am using is:
validationtime=time-3000
response.write(time)
response.write ("<BR>")
response.write(validationtime)
but the response I get is incorrect along the lines of:
11:54:42
14/10/1891 12:05:18
What am I doing wrong, why is validation time also including a date
Can someone tell me how i can use a if loop
its related with time I want to display a registration form on 29 Jan 2007
only between 10am pacific time to 1pm pacific time
so only between 10am - 1pm pacific time the registration form should appear
i live in the central time zone
can someone tell me how i can make this happen.
I am trying to use the time function to determine whether or not it is morning, afternoon or evening.
I wrote my code and then changed the values it is comparing with to see if would work and it doesn't, it just stays on the good morning.
<% if time > 0 then %>
Good Morning <b><%= Session("sessFirstName") %></b><br><br>
<a href="logout.asp">Log Out</a>
<% end if %>
<% if time > 12 then %>
Good Afternoon <b><%= Session("sessFirstName") %></b><br><br>
<a href="logout.asp">Log Out</a>
<% end if %>
<% if time > 18 then %>
Good Evening <b><%= Session("sessFirstName") %></b><br><br>
<a href="logout.asp">Log Out</a>
<% end if %>
Do i need to put quotes around the number i am checking with?
how can i get this tag to adjust for time zones? This is probably simple, but i just can't think of how to do it. Code: <%=Time%>
View Replies View RelatedI am writing an XML file with lots of Data and it takes time but before the operation can be finished I get this error
Quote:
The maximum amount of time for a script to execute was exceeded. You can change this limit by specifying a new value for the property Server.ScriptTimeout or by changing the value in the IIS administration tools.
How do I handle this?
Would anyone know if there is an easy and clean way of presenting maybe a time control field in html in an .asp page that allows a user to specify a certain time of the day? Currently using an <input name="SpecifyTime" type="Text"field but was wondering if there was a better way of doing this as to where users won't mistype in entering non time related characters?
View Replies View RelatedWould it be a stupid idea to use the Log Util component to retrieve the UTC date/time? It appears that the DateTime property could be used for this, but I'm not really sure how it searches through the log file.
View Replies View RelatedI've used this ASP funtion to display the time on my web page:
Date: <%= FormatDateTime(Date, 1)%>
Time: <%= FormatDateTime(now, 4)%>
THis was working fine until i moved my site to a server based in the states, not the time is 5hrs behind. help me resolve this?
I am using ADO to connect to SQL 7.0. At times the connection timeout expires. Is there any way to inrease the default time out? I think currently its 60 secs. Here is the code that I use to establish ADO connection.
set rs = Server.CreateObject("ADODB.RecordSet")
sCon = "DRIVER={SQL Server};
SERVER=Indy2;DATABASE=ProdProtrans;UID=xx; PWD=xxxxxxx"
How to find GMT time in ASP?
View Replies View Related