Time Difference In Seconds
I'd like to find the time difference in seconds in my ASP-code, but can't find how to do this. In php you have the time() that give the seconds from 1.1.1970 (?) until now. Is there something like this in ASP too? I have found the DateDiff that one just gives days, right? I basicly want to have two variables, time1 and time2, and show the seconds between them.
View Replies
ADVERTISEMENT
Basically I have 2 times:
timea = (date here) 12:00:00 PM
timeb = now()
and what i want to do is compare the difference in seconds between the two.
But I'm struggling and the thought has crossed my mind that DateDiff only works with dates not times...
Code:
<%
Dim DateToCompareTo
DateToCompareTo = 4/10/2005 1:00:00 PM
%>
There are <%= DateDiff("s", Now(), DateToCompareTo) %> seconds left %>!
View Replies
View Related
I would like to display the difference between the logging time
[Session("start"] and the current time [now]. In hours minutes and seconds,
I have tried a couple of things but all I see is gobbledy gook.
View Replies
View Related
I'm having a problem with this code:
Code:
<input type="hidden" name="lastdate" value="<%=now%>">
not returning the "seconds" portion of time. It writes the date and time - but only to the minute. The seconds are 00 each time. Ex. 1/29/2005 1:47:23 PM is what I want and 1/29/2005 1:47:00 PM is what I'm getting.This is the result I'm getting on two separate DB's on two different servers. I'm sure there's some glaring problem I'm overlooking because I sure can't see it.
View Replies
View Related
I have a simple calendar scipt that ask for time of event input. While I like the time feature I do not like the fact that it displays with seconds included.
Ex. Displays HR:MIN:SEC 5:05:30 PM
Desired display 5:05 PM
How do I get rid of the display showing seconds? I have changed the database format, but this does not seem to effect the disply on the asp page.
View Replies
View Related
I need to convert seconds into time since for a message board application.
"minutes ago, hours ago and days ago" etc.
I have capture the time of the original post and compared it to the time now getting seconds but having a little trouble working out the seconds into time. Have used calculations (/60 minute), (/3600 hour), and (/86400 hour) but the time remaining is bugging me.
View Replies
View Related
The code to show how long it took the page to generate in seconds ?!?, if you get onto the main page of this site, www.tgplus.net and loom at the left had side, it tells you how long it took the page 2 generate.
View Replies
View Related
is there anybody know to code the time difference in asp? i used timediff, it returned a date, it should return a time actually. i tried the command in mysql n it's fine. but it's error when i switched to ASP. i hv refered to alot references such as sql time manual n other sites. but stil fail to find ans.
View Replies
View Related
I am logging a time that people log in, stored as a short time. I want to be able to run a script which runs through my users database and checks all the users who are logged in, it checks the users last action time time against the current time and automatically logs any out any users who haven't had any activity in more than 30 minutes.
pseudo code as follows:
dim currentTime = now()
dim lastActionTime = rs("lastAction")
if(lastActionTime < currentTime - 30 minutes)
log the user out
Can anyone tell me how I code the time calculation to deduct 30 minutes from the current time?
View Replies
View Related
i need to get the number of seconds since Jan 1, 1990 or 70 or something to compare session times ... how do i get the timestamp in seconds ...
btw the msdn library is not a very good one ... does any one know an asp manual simillar to php (downloadble) ...
View Replies
View Related
Code:
StartTime = FormatDateTime((rs("startdate")),3)
this returns
7/4/2006 1:00:00 AM
I need to trim the seconds off so it looks like this
7/4/2006 1:00 AM
View Replies
View Related
I have a variable that returns a certain number of seconds. Is there a function that can format this into something more useful?
For example, if the variable returned is 32, then it would format it to say "32 seconds"
If the variable is 312, then it would return "5 minutes and 12 seconds"
If the variable was 7315 then it would return "2 hours, 1 minute, and 55 seconds"
And so on.
View Replies
View Related
Is there a way to response.redirect to a url within 5 seconds or something, so its not right away? I was thinking meta refresh, but everywhere I go online it says that meta refreshes are not a good idea.
View Replies
View Related
I have a column in my Access db that stores a number which is supposed to be seconds. How can I convert the seconds to display mm:ss on my ASP page? For instance, if the number in the db is 300, I want it to display 5:00 on my page.
Now these are lengths of time, not current time (AM or PM), so I dont want it to display the AM or PM. I've tried format(rs("length"), "nn:ss") and that didnt work. Matter of fact Format(), FormatDateTime(), and FormatNumber() doesnt work on my page. I've been getting the 800a000d Type Mismatch error. What am I doing wrong? Code:
View Replies
View Related
I'm trying to set up an asp script that redirects a user after a few seconds on a page- I cant use meta tags to redirect due to the page structure.does anyone have any similar scripts they could share?
View Replies
View Related
What is the best way to do an ASP/sleep for 8 seconds (pause script for 8 seconds)? I have tried the following:
EndTime = Now() + (8 / (24 * 60* 60)) '8 seconds
Do While Now() < EndTime
'Do nothing
Loop
But unfortunately that keeps the CPU at 100% for that time. I need something that doesn't impact the CPU, as this delay will be in a while loop that will execute continuously for a few days.
View Replies
View Related
Been playing with the function DateDiff, and with it it's easy to calculate the difference in years/months/days between two dates. However, if i wanted to calculate the difference in Years, Months, Days, Hours, Seconds (a la Ebay bids) how can I do this? Is it easy or complicated?
View Replies
View Related
how to do the count down timer? which their is count down timer for sepacific day, hour, minute and second.
View Replies
View Related
I need to get the number of seconds when subtracting two date/times.
With the code I am using below I subtract the two date/times and end
up with a total of days like "1.56".
Then when I multiply it to get
the number of seconds I am not getting an accurate number. I should
only have whole numbers of seconds with nothing past the decimal
point. I would like to be able to subtract the two date/times and get
the number of seconds without multiplying to get it. Is this possible?
Does anyone have a better more accurate way to do this? Code:
View Replies
View Related
I have been looking around at various design solutions for uploading a file using ASP and have found that many sources have devised a much simpler plan using ASP.NET.
My question is this, I have a box running Win2k Advanced Server, with the .NET framework installed. WIll that enable me to run some of the new functions etc. decribed in ASP.net ??
View Replies
View Related
What's the difference between ASP and ASP.Net? Which one should I learn in order to start making dynamic web pages for the internet?
View Replies
View Related
So I need to write the difference between the biggest and the smallest number in database table. I know that I need to take MAX and MIN from table, but I just can't get it work.
Example:
Let's say max = 5 and min = 1, I need to have it like this:
5-1=4 (max-min=total)
View Replies
View Related
Maybe my books are just sorry, but I can't find a description of what <%# is supposed to mean. I find Dreamweaver inserting it often.
View Replies
View Related
Is there any technique available that my asp code will convert into asp.net
View Replies
View Related
What is the difference between
Code:
<meta http-equiv="refresh" content="5;url=menu.asp">
and
Code:
Responce.Redirect("")
Which one would you chose?
View Replies
View Related
What is the difference, and when to use one over the other?
View Replies
View Related
i have a problem with differentiating these
response.redirect()
server.transfer()
server.execute()
do they all perform same?
View Replies
View Related
I'm writing an ASP app that administers an ISA server remotely. The fact that it's an ISA server isn't my problem I believe. My question? What is the security difference between disabling anonymous access and using account X from the web client, versusallowing anonymous access but using account X as the account that runs the application?
When I configure my web application to allow anonymous access, but set the anonymous process to use account X, my ASP code works (the ASP code can administer my ISA Server). When I disable anonymous access, and I log into the web application using the same account X I mention above, I get an error 80070005 when my ASP code tries to connect to my ISA server to administer it. I would think the above two options would be equivalent, but they're not. What is the difference?
View Replies
View Related
I have a problem to calculate the day different. I use
datediff(currentdate, quoteDate) > 20
The error message is : Wrong number of arguments or invalid property
assignment: 'datediff'
I use datediff("D", Date, quoteDate) > 20, but still could get the correct one. Maybe I need to change string to the digit. How to do it?
View Replies
View Related
I understand how asp scripting works and how you put <% %> around your server script. However this is .asp . what is .aspx? is this the new version ASP.nET? I dont understand how it works when i create a new aspx project in vstudio.net and i create a aspx page in design view.
I add a button and then double click it to add code to that button. I dont see any html code around it? In an asp page the server side code is surrounded by html code. An aspx page almost looks like a normal vb application, why is there no html
code around?
View Replies
View Related
Can someone shed light on this: -
When I search for 'ô', the url encode shows a "%F4", whereas should I show a "%C3%B4"
View Replies
View Related
A few weeks ago I was told in this forum that ASP would be a great solution to a large web site. I purchased a book about ASP.Net but have also seen info on ASP. Can you please tell me what is the difference between the two?
I don't know computer programming at all. Dreamweaver MX is the program I use. Can ASP be done with a WYSIWYG program? I have set up databases in Access & built web sites with DW MX I am not sure how to tie the two together.
View Replies
View Related
I have an arrayA and arrayB. How do I get the difference into arrayC.
View Replies
View Related