have a very simple web page/site with only 3 fields where hospitals enter some data for tracking purposes. As soon as I submit data this is the eerror i get
Microsoft VBScript runtime (0x800A000D)
Type mismatch: 'GETDATE'
/shipment/TMP3or9t1fnjy.asp, line 61
I just understand why would there be a type mismatch,especially because i have used this before, the field in the database is a datetime field. Code:
I got a problem while running an application. The code for this is as follows:
aList = Split(strMsg,";") For nX = 0 to UBound(aList) strarry=split(aList(nX),"_") var_year=left(strarry(2),4) var_month=mid(strarry(2),5,2) var_day=mid(strarry(2),7,2) var_date=var_day&"-"&var_month&"-"&var_year var_time1=mid(strarry(2),9,2) var_time2=mid(strarry(2),11,2) var_time=var_time1&":"&var_time2 set rs1=conn.execute("insert into tbl_BackupfileInfo(Filename,Createddate,Createdtim e)values('" &aList(nX)&"','"&var_date&"','"&var_time&"')") Next
while runnig this application some times it works fine .But some times it giving an error
Error Type:Microsoft VBScript runtime (0x800A000D) Type mismatch: 'UBound'.
I have about 2000 email addresses in a table my script was sending and got to about 600 and pulled this error:
Microsoft VBScript runtime error '800a000d'
Type mismatch: 'To' /admin/newslettercreate.asp, line 151
Which refers to this line
objMail.To = objRS("Email")
I'm not sure how it can error with this half through the job, there were some blank fields which I have now removed which i thought could have been the problem but not sure.
I have the following code that I am trying to use to calculate distance. However I keep getting a Type Mismatch error on line 50 which is in bold. Code:
I am writing this simple program where i am running the query and then displaying all the output in my text boxes and all.Here is the code.I get the Type mismatch error at the highligheted line.Some times it says Type mismatch 'RS' at that line too. Code:
My ASP code works on a number of servers except one particular server and I cannot see any reason why this is happening. Any suggestions as to what settings etc. I should be looking out for on this other server??
Microsoft VBScript runtime (0x800A000D) Type mismatch: 'm_items'
The first one has a form with a drop down box which lists all the names of the surgeons. When a particular surgeon is selected i am trying to pull out other coresponding info and post it on the second asp page. The first page works fine and i am able to populate the drop down box by connecting to the database. The below is the code snippet on the second page in which i am facing errors.
I'm new to using long raw fields with ASP. I know it would be easier to leave the files on the file system, but the client wants them in the database. Based on what I've read so far, I have used the following code to read files from a hard drive and stuff them in the database. Code:
I am doing a simple profile update webpage, I keep getting this error and can'y figure out how to fix it. I have included the code. The only field in my database that isn't a text field is my userid field which is an autonumber field.
Microsoft OLE DB Provider for ODBC Drivers error '80040e07'
[Microsoft][ODBC Microsoft Access Driver] Data type mismatch in criteria expression ASP Code:
<% Function CstrN(str) If IsNull(str) Then CstrN = "" Else CstrN = Cstr(str) End If End Function %> chkboxvalue = CstrN(RS("field1")) & CstrN(RS("field2"))
Error message: Microsoft VBScript runtime error '800a000d' Type mismatch
This error number usually generates when there is spelling or any mismatch variables, etc. I checked and I couldn't find any error. Then, is it the syntax?
strSQL ="select * from fn_select_loads_carrier('"& strCarrierEmail &"', DEFAULT, DEFAULT)"
from an asp page. When i run it on the SQLl server it results me a result set. And also in the asp page all the results are getting displayed properly. This is how i am running the query: Code:
All the ASP pages in my website were working fine this morning but suddenly this evening I'm getting this error message in lot of ASP pages on my website.
Microsoft VBScript runtime error '800a000d' Type mismatch: 'strEndDate'.
I didn't change any code ,DSN or database tables or stored procedure. What should be the reason behind this error message?
SQL "Select * FROM kmCarbonlessCost WHERE Part = "'" & CCSpecificProduct & "'"" rs1.Open SQL,cn,1,2 IF NOT rs1.EOF THEN xCarbonlessCost=trim(rs1("CostAfterRebates")) ELSE xCarbonlessCost=0 END IF rs1.CLose
I have no idea what I'm doing wrong.
Error msg: Microsoft VBScript runtime error '800a000d'
strSQL ="select * from fn_select_loads_carrier('"& strCarrierEmail &"', DEFAULT, DEFAULT)"
from an asp page. When i run it on the SQLl server it results me a result set. And also in the asp page all the results are getting displayed properly. This is how i am running the query:
Create_Recordset() obj_RS.CursorLocation = adUseClient obj_RS.Open strSQL, obj_Conn ,adOpenStatic, adCmdTable If strSort = "none" Then obj_RS.Sort = "LoadID, TMSName" Else obj_RS.Sort = "" &strSort &"" End If
If Err.Number <> 0 Then strRedirect = "Error.asp" response.write "Erro number" &Err.Number End If
I am getting the Err.Number as 13 and it doesnt display at which line the following error is occuring. But all the results which the database is returning are getting displayed on the webpage.
I have no idea from where this err.number 13 is occuring at. I crossed checked all my procedures and script.
The listing_districts table has two fields, one is listing_id and the other is district_id. I have a form on an asp page that has a <select> field used to display all districts. What I am after is dynamically writing "Selected" for thos districts that are in the listing_districts talbe with a matching listing_id field that is equal to the request("listing") variable. Code:
I'm now getting a Type mismatch error and am stumped. I have the following lines of code and am really trying to learn this, but I've been stuck on this one for a few hours now. It tells me that the mismatch error is on the last line. Code:
dim connectionToDatabase dim database_select_submitted dim id Set connectionToDatabase=Server.CreateObject("ADODB.Connection") connectionToDatabase.ConnectionTimeout=60 connectionToDatabase.Open "DSN=international_hotlines" id=Request("id") database_select_submitted=("SELECT * FROM hotlines WHERE incrementing_number=" & Request("id") & "") connectionToDatabase.Execute(database_select_submitted) Response.Write database_select_submitted("receiving_record_number")
I apply a function to a set of Strings basically as follows formatText(str_title), etc. I use this same method across multiple pages, and across all of them this works fine, APART from on ONE page.
It is basically extracting the EXACT same variable (with the exact same value) on BOTH pages, and applying the EXACT same function to this variable, yet on one page it is displaying the following error :
I'm in the midst of building my first ASP Session Shopping Cart. Please take a look at this page. See the error that's sitting there? Well, this is it:
Microsoft VBScript runtime error '800a000d' Type mismatch: '[string: ""]'
I have no clue where it's coming from. The file in question is sessionCart_display.asp. Here is the code of that file with line 80 (the error line) in bold: Code:
i have 3 columns in sql server . all of them are numeric value. when a user enter my site i take the value of userid (numeric one) i assign it as session("userid ") . after a query i take 2 value (both numeric again) from my table and write this code. if towhom=session("userid") then towhom=fromwhom . it gives an error .. how can i solve it. Type Mismatch Error .