Un-encoding Server.URLEncode

There has to be a simple method for un-encoding output from Server.URLEncode or Server.HTMLEncode using server-side VBScript but I just can't find it. I'd appreciate it very much if some sharp individual here would shove me in the right direction.

View Replies


ADVERTISEMENT

UTF-8 And Server.URLEncode

We are running ASP classic on IIS 5 on W2k SP4. We recently added <%
Response.charset="utf-8"%to the top of all our pages (as suggested by
validator.w3.org). A problem arose on a page which applies
Server.HTMLEncode to a field that was inputted from the user. The
problem is that when the user enters a phrase such as:

My Fiancé

The Server.URLEncode returns the value:

My Fiancé

which doesn't appear correct. When I take out the <%
Response.charset="utf-8"%line, it returns

My Fiancé

which displays correctly. Am i ok to just leave out the <%
Response.charset="utf-8"%line, or should I use a different charset?
or is there some other fix?

View Replies View Related

Server.URLEncode

I've encountered an issue and I'm not sure what's going on. I've encoded the values in a querystring. When you hover over the link, it doesn't appear to be encoded properly. But if you viewed the source of the page, it's encoded correctly?

wrong:
cp=ASF-4204=4PDT

right:
cp=ASF%2D4204%3D4PDT

The problem is with the "=" in the first example. Can anyone explain what's going on and how I can fix this?

View Replies View Related

Server.URLEncode

If I redirect a user to a page and encode the url, do I need to decode it on
the page they are redirected to.

For Eample..

Response.Redirect (Server.URLEncode(http://mysite/test.asp?id=1))

In this case do I need to decode the URL before I can do a
Request.QueryString("id")?

View Replies View Related

Server.URLEncode

When using Server.URLEncode, is there a way to undo what was encoded? I suppose I could use REPLACE if I knew exactly what the original string was. But what if I didn't know?

Apt #1 transforms to Apt+%231 how do I get it back to Apt #1 ...?

View Replies View Related

Using Server.Urlencode

I have users who upload files using my application using ASPUPLOAD component. My code uploads the file to a network location and once the upload is finish I display the hyperlink using the following code

<a href=myserverattachments<%=server.urlencode(rs("FileName"))%>
target="_blank" ><%=rs("Filename")%>

Sometimes the hyperlinks works but sometimes it doesn't.Should I be using server.urlencode or not. The problem is my users upload files with all sorts of filename slike

088-888 24(05)-774448.doc which includes spaces, special characters etc.

View Replies View Related

URLEncode

I'm trying to pass a URL parameter from one ASP page to a recordset on another (workng with SQL Server). The strings all have three '-', and some additionally have '&'.
I used URLEncode, because the strings with '&' don't pass properly, although the others do. However, even with URLEncode, the recordset on the second page still comes up empty - the strings still don't seem to encode. This is

ASP Code:
<a href="javascript:popUp('locInfo.asp?locCode=<%=Server.URLEncode(rsHighRating.Fields.Item("locCode").Value)%>')"><%=(rsHighRating.Fields.Item("locCode").Value)%></a>

The recordset on the locInfo.asp page filters by the locCode, it is set up as Request.QueryString, and does indeed work for all the codes without '&'.
Can anyone point out where I might be going wrong?

View Replies View Related

Using URLencode

<A href= "GenericUploader.asp?SavePath=<%=server.URLEncode("D:my new
web siteU") %>">folder name</A>

the link above does not seem to produce the appropriate query string value upon being clicked on. That is, when an internet user clicks on that link, the Internet Explorer opens the GenericUploader.asp web page, and the code in that asp web page responsible for picking up the value corresponding to the argument 'SavePath' (i.e, request.querystring("SavePath")) returns solely the first word of the value rather than the entire CORERECT value, which is 'D:my'rather than 'D:my new web siteU'.what needs to be done?

View Replies View Related

URLEncode

I'm having a strange problem with URLEncode. When I use the following code, it works:

m1 = server.URLEncode(m1)

Now if I add another line for another variable I get a type mismatch error:

m1 = server.URLEncode(m1)
m2 = server.URLEncode(m2)

The error is: Microsoft VBScript runtime error '800a000d' Type mismatch: 'Server.URLEncode'

It doesn't matter which one I do buy itself, if I do , it works. If I have more than one use of URLEncode, I get the error. Both variables are dimensioned like (dim m1).

View Replies View Related

Difference In URLEncode

Can someone shed light on this: -

When I search for 'ô', the url encode shows a "%F4", whereas should I show a "%C3%B4"

View Replies View Related

ASP Encoding!

I am running the Script Encoder on ASP file,
however I gets this message no matter what I do to this
file, I even clean up most of the html tags.

Why the Script Encoder Object failed to encoded asp file,
but it works fine on .js files.

Here is the message I gets:

Microsoft(R) Windows 98
(C)Copyright Microsoft Corp 1981-1999.

C:Encoded Script>screnc *.asp c: emp

Scripting encoder object ("Scripting.Encoder") failed on
C:Encoded Scriptine2c.asp

View Replies View Related

Encoding

I want to encode the data send from my website to server page. ie I want to hide from the user.

View Replies View Related

URL Encoding

I have a page that got a textbox to submit a string to another page, when the second page recieve the string the url of that page looks like this: Code:

View Replies View Related

Character Encoding

I have a partner sending me by post method to an asp page some text (xml
string).

It arrives to my page encoded as follows
%9a%2f%Purchaseorder%3....f

The < and > and spaces are replaced by nuùmbers and percentage sign
I am using Request.BinaryRead(BytesTotal) and then doing response write and
I am getting exactly the same string with the encoding
How can tell my asp page to translate the encoded text to normal text?

View Replies View Related

Encoding Cookie.

When I run the ASP page for the first time, I find out, that the Cookie file name contains some several special characters such as %5F, which are encoded with a URLEncode function. So, I have the following string (after convert): ....

View Replies View Related

XML-Encoding Problems

I'm using ASP to load an XML file. German Umlaute work fine all the
time (I use <?xml version="1.0" encoding="iso-8859-1"?> so they
should). Except this time where I add a text to a child which I then
fill with text which contains an "ä". The ASP-error is:

"An Invalid character was found in text content."
(Or I believe that's the English translation, I get a German one, as
I'm on a German system.)

I read something about this error however even some suggested fixed
don't work. I installed the latest MSXML (4) and use
"Msxml2.DOMDocument.4.0" for server-createObject.

Actually all I want to do is save some text coming from a textarea back
into a little file.

View Replies View Related

Encoding The Ampersand(&) In A Url

I'm trying to use a popup window initiated from javascript to display pictures. Some of the directories and pictures contain &'s in the name or path. I've read the posts about Encoding but I cannot seem to get the get this working. Encoding the path to replace the & with %26 just gives me a page not found.

<script language="javascript">
function NewWindow(url, w, h)
{
url = "http://intranet/Marketing_Photos/" + url;
window.open(url,"_blank","width=" + w + ",height=" + h + ",left=0,top=0,scrollbars=yes,resizable=yes");
}
</script>

url is the subdir and picture name, i.e. subdir/pic.jpg

Mareting_Photos is an IIS Virtual Directory pointing to a different server.
Everything works, the pictues display, except when I pass a url with an & in the path then I get the page not found error.

I can type in http//intranet/Marketing_Photos/SomeDir/Some%26PicName.jpg (replacing the & with %26) in the browser address bar but I get a page not found.

View Replies View Related

Encoding Proplem

for arabic language im using the write code which is

<%@ Language=VBScript CodePage = "1256"%>

it works good when i try to display data but no good work when i try to insert data
im using sql server 2000 database.and most of my pages r self refrencing like that

if st=1 then

code here

end if

and of course im using the encoding code 1 time above the page </DIV><DIV>

View Replies View Related

Chinese Encoding

I developed a site in English but need it to be viewed in chinese.

Is it possible if so how do i go about it.

I've tried various ways but i can't get it to work.

I've done the following but it yieled no results.

<body lang="zh-TW" xml:lang="zh-TW">

Is there anything else i can do....

View Replies View Related

Ansi Encoding

i need to connect to a dbf database with ansi/oem encoding the connection is ok but i have problem with page encoding the characters don't display as they should! does anyone have any suggestions??

View Replies View Related

BASE64 Encoding

I've finished my whole application and now I don't like the whole
session variables that I am using. I have a form, user fills in info
clicks submit and using CDOSYSMail an email link gets created with an
encoded query string. i.e
http://www.yahoo.ca?#$@%@&#%#$@&^@%# which translates into
http://www.yahoo.ca?userID=54&LocationID=Denver.

Now when the user get's this email and clicks on the link I have a
decode function(again using BASE64) that takes that url and decodes it
to http://www.yahoo.ca?userID=54&LocationID=Denver. My app then
connects to the database and pulls info associated with that
querystring. I am doing the passing from page to page using session
variables. I do not want to do this? Any ideas How I can take what
is encoded in the url link and decode it on the next page? Let me
know if there is a simple solution to this. I love the encode/decoding
function.

View Replies View Related

Page Encoding - RSS

I am getting an error in my attempt to run RSS feeds via ASP

Error...
encoded as "utf-8", but your server is reporting "US-ASCII"
I've tried windows-1251 but do not seem to be able to change the output from the servers default

The problem is the data from an Access db contains hyphens and ampersands etc which cause a problem if the db content in the xml is read as US-ASCII

How can I encode the page in ASP so that it can display the correct encodingmfor xml.

View Replies View Related

UTF8 Encoding

I have an oracle database where I store my html files on. While uploading I call the server.HTMLencode function to encode the blog but that's not enough. Once that is called I would like to encode the rest of the text through UTF8. Is there a predefined function that I can use to do this?

View Replies View Related

Character Encoding

I have created ASP with database application over a PHP based software. My problem is I get data from Excel files with an encoding as SJIS (Shift-JIS) and save it to the database.

And the PHP software is the one that displays data in the web but using UTF-8 (unicode). I need an API in ASP that will convert charactrers from SJIS to UTF-8.

View Replies View Related

Encoding ASP Files

Does anyone know of a good way to encode/encrypt ASP files so the code is
hidden, but still able to be read by IIS when requested? I have done some
searches and have found that using vbscript.encode would work, but that it
is very weak and tools are readily available to decode them. I have also
seen two products that claim to do this, but they either just used
vbscript.encode, or didn't work even on extremely simple asp files.

View Replies View Related

Encoding French

I used "Request.Params["sName"]" on the Page_Load event.

I could not read the French like "é" If the sName has French, ie. if I pass the url like "webFom1?sName='abé'", then the Request.Params["sName"]"will equal to "ab", the "é" get choped.,
What should I do?

I used System.text; and set Request.contentEncoding =encoding.default or
Request.contentEncoding =encoding.utf-7, none of them works.

View Replies View Related

Ignore Encoding

if I read an XML document using ASP without any encoding, ican read it fine, but if an XML document contains an encoding parameter, like the following, ...

<?xml version="1.0" encoding="ISO-8859-1" ?>

... then it doesnt work and just stops working with no errors.

Can I ignore the encoding, if so how?

View Replies View Related

Character Encoding Problem:

I'm having the following problem: I have an ASP page that calls another JSP page, passing some strings as parameters. The strings have special characters, such as "ó" and "ê" (Portuguese characters). When passing those parameters, the JSP page receives them as UTF-8 characters, with 2 bytes each, but we would like them to be treated as ISO-8859-1 characters. Code:

View Replies View Related

Transfer-Encoding: Chunked

When I get the following input stream of chunked data I ge
Request.TotalBytes = -1 because there is not Content-Length.

The following will work because I hardcoded the correct length:


TotalBytes = 16
strBRequest = Request.BinaryRead(TotalBytes)
I get: 16 bytes of data (see below)


However, if I don't know the length and try to use something > 16 li
100 then I get at error and the TotalBytes is set to 16 and th
strBRequest is empty.

Does anybody know how to determine how to get around this. I am usin
Transfer-Encoding: chunked because I do not know how much data is bein
uploaded (could be very very large).

POST /test.asp HTTP/1.1
Accept: */*
Host: 192.168.1.10
Content-Type: application/x-www-form-urlencoded
Transfer-Encoding: chunked

10
16 bytes of data

View Replies View Related

Hebrew Encoding Issue

I have an asp page that shows the contents of HTML files in a textarea using the Server.HTMLEncode method.
It works perfectly with HTML files having english contents.
When trying to show HTML with Hebrew I see all the text correct, except the hebrew part, appearing as jibberish.
I use the hebrew encoding "windows-1255" in all the files with codepage=1255 in the beginng of the asp page.
Using a special text editor I detected the encoding of the jibberish text - it's windows-1252.The problem started when i uploaded the page to a remote server. in my local server it runs ok.I should say that all the html pages are readable when entering their url in the browser and i can also make changes in hebrew to a database using asp (from that remote server).I think the problem has something to do with the way the remote server opens the file.

View Replies View Related

Outlook Mail Encoding

im sending a mail with CDONTS now if im combining 2 languages in the same mail, i have a problem (languages are hebrew and english) if im using dir=rtl the words in english appear backwards (the letters order is reversed) if im using dir=lrt the hebrew is reversed . how can i fix this thing.

View Replies View Related

Encoding Problem With MS Access

We have a MS Access database, and we are working with greek encoding. When we insert data into the database, it's fine, everything in the database is stored properly in greek. However, when we retrieve from the database, everything is return as "????S???" (something like that with a lot of question marks).

What we've tried so far are adding CODEPAGE="1253" on top of the script, but that doesn't seem to help. I also tried response.Charset="UTF8", but no luck.

Anyone know what else can I try to have the data being retrieved with proper encoding?

View Replies View Related

Creating An Xml Doc That Includes Encoding.

I'm trying to make an xml doc that gets passed to sql server, but I keep getting an xml parsing error. When i printed out the xml string, the encoding is not on there despite my putting it there... Code:

View Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved