Update First 10 Records Only
I want to make modifications to the first 10 records in my database. I know that I can do it quite easily with the RecordSet object, but for speed, I was wondering if I could use pure SLQ?
View Replies
ADVERTISEMENT
Update Records
I have a form with mutiple records. Each record has got 2 fields to update. How to update mutiple records at the same time??
View Replies View RelatedHow To Update Multiple Records!
how to update multiple records on one submit. Say for example i have number of records on a html table, user performs changes on some of the records, and hits the submit button at the end and all these value have to be updated into the sql query.
View Replies View RelatedUpdate Multiple Records
How do I update multiple records in a table in ASP using loops ? For example.
I have a table with the following colums
ID | Col1 | Col2
-------------------------
1 | 50 | 100
2 | 25 | 130
3 | 55 | 70
I want to add *66* and *77* into the ID # *1* and ID # *3*
respectively. So the result should be
ID | Col1 | Col2
-------------------------
1 | 116 | 177
2 | 25 | 130
3 | 121 | 147
Note: All datatype of the colums are integer.
Update Multiple Records ?
how can update the multiple records at a time ? what loop will use to update the multiple records ? Code:
View Replies View RelatedUpdate Multiple Records At Once
How can I go about updating multiple records or deleting multiple records
from a DB at a time?
Mass Update Records
I just had a problem where I needed to update a bunch of records from a single form submission. I am sure there are lots of better ways to solve this, but I offer the code I came up with. Also I’m asking if there are any better ways.
The form page had a form in it with a table. Each row in the table had a database record in it. In each row, sat the input field titled “myOrder” and a hidden field called “myID”. The table was a repeat region, so that each field was populated dynamically from each record in the database. The number of records was dynamic in that they increased or decreased by the category the user was in.
The page submitted to my mass_update page.
Here is the relevant part of the code that took each “myID” and “myOrder” data and then updated the database record:...
Using Checkboxes To Select Records To Update.
I display work request records from a db table into a .html table dynamically by cycling through the db table until RS.EOF.
To the right of each record displayed I have two checkboxes, "chk_dev_accept", "chk_dev_sendnotif". These are the only editable items on the page.
"chk_dev_accept" is clicked by the developer to assign the work request to his/herself.
"chk_dev_sendnotif" is clicked if the developer wants to notify the customer that the status of the job has changed (optional and automatic - I don't have a problem with this part).
Upon clicking the "Update Record" button, I want the records with the checkboxes clicked to update.
The db record fields that would be updated are: "dev_developer" (The developer that will do the job, read from a cookie) and "dev_proj_status" (changed to 'Assigned'). These two fields should update when the "chk_dev_accept" is clicked and form submitted. I want the developer to check as many records as he/she wishes.
My problem is I'm not sure how to code that <input checkbox....> tag, and then, how to take that checked value to select the appropriate records to update.
Update A Field For A Bunch Of Records At Once?
My products table has a weight field that I need to populate. A bunch of them have it and a bunch of them don't, but I need them all to have one. The weight is the same, 3, for all the records. I also have an Include field in that table. I want to make the weight field 3 for all records where the include field is true (it's a yes/no checkbox in access.)
I'm using Dreamweaver and I can build the SQL statement just fine but I'm not sure of how to loop through this to set the field for each of these records.
Update Multiple Records From Array
I have a shoppingcart which is saved in an array. When the user goes to the checkout and and presses the order button the contents of the array gets saved in a databasetable. This all works fine.
The problem that I have is that I want the articles that the user ordered get subtracted from the Quantity I have got in my database. But I don't know how to tell the database which records have to be updated. Code:
Update Multiple Records With One Submit
I have a list of registrants and I want to use a check box after each record
to show those who attend and then post all with one submit button.
How Does One Update All Records Displayed In A Asp Page
I got a test asp page which connects to Northwind.mdb database. This page
pulls all the rows from the Customers table. One column i.e. GoodStatus has
been added to the customers table. The following is the code to display all
records of the customers table with some customization. Code:
Update Statement For Selected Records
I wish to update certain records in a access database where the placeID is a certain number and the coststypeID can be other numbers. I am using the following code:
View Replies View RelatedStuck On Update Multiple Records (same Field)
how to update a database from a dynamic table with checkbox. Their is only one field I would like to change and that is the one with the checkbox.
I am using Dreamweaver and I create a dynamic table, add the update record and I get BOF EOF error. The database does have data in it. Code:
How To Update Multiple Records Into A Single Table
I already have this piece of code that inserts multiple rows of data into a single table at once. Code:
View Replies View RelatedHow To Update Multiple Records With Different Multiple Value
i hav problem with updating the data. In the asp page i hav displayed records based on search criteria. in display mode im displaying the to be updated field in combo box for each similar contract_no. each contract_no will hav different no of rows and to be updated combo box.
based on the selected value in the combo boxes of different contract_nos i hav to update the combo value with old value. user select multiple combo values at a time I need anybody's help with detailed programming logic.
How To Tie RegID To Form To Update (batch Update)
Okay there is an unique EventRegID for every registration. When people first register they get pre-registered. Then an admin comes in and confirms or wait list them (based on whatever requirements). My question is how can I tie the EventRegID to a form with multipule ID's so they can batch confirm or wait list the PreReg list? Code:
View Replies View RelatedSystematic Updating Of Records Depending On Amount Of Records In Another Table
The problem concerns 2 tables, cart_products and cart_shoppingcart.
Cart_products contains all the product data (eg, prices, product's key name, etc), but most importantly, it contains the quantity of stock (prod_quantity) for each item.
cart_shoppingcart contains all of the user's items in their shoppingcart, including those that are part of an (customer) order; these have the order_number to differentiate from those that aren't in any order (their Order_number is 'no_order', the others have the order number).
Now, what I want to do is this:
For every item in the order (ie, every entry in cart_shoppingcart that matches the username and order number), take the quantity (x) the customer is ordering, then take the quantity of stock remaining (y), then subtract x from y to create the new stock level (z) and update the appropriate record in cart_products with z (all this with SQl preferably).
I was thinking of using a Do while loop, but realised that it wouldn't work as I'd have to use several SQL statements and then I'd run into a problem the minute ASP reads "objrec.movenext".
Pulling Records From End Of A Database Or Inserting New Records To The Beginning
I'm trying to pull the last 5 records from my database.
<% j=5
rs.MoveLast
While ((j>0) AND (NOT rs_article.BOF))%>
''Execute HTML and data insertion here
<%rs_article.MovePrevious
j=j-1
Wend%>
Everytime I attempt to run this code, I recieve an HTTP 500- Internal Server Error. It tells me no more than that. I know that my connection settings are OK because when I move forward through the database (first five records), the code executes without error. And yes, my Cursor type is Dynamic.
Alternatively, I would also like to know how to add new recordset to the beginning of a database rather than the end.
Grouping Records Within Another Group Of Records
I have an Access database with two fields that I would like to group by. The two fields are location and department. Field names are "Location" and "DeptName".
I have the code correct for grouping by location. That code looks like this: Code:
Getting Rid Of $ For An Update
I have this page that displays a dollor amount code:
<td class="tableValue" width="122">Expiring Premium:</td>
<td width="400" align="left">
<input name="Expiring_Premium" type="text" value="<%=formatcurrency(Expiring_Premium,2)%>" class="tableValue" size="27"></td>
it would display $100.00 when i go to insert that value into the database the value i get is $100.00 and i get an error, i need to get rid of the $ sign but not sure how to do it because the number range can be from 1 to a billion dollars.
I have this code for asp that if the value is null it insert a null instead of a blank, else i get an error message in access.
'Expiring_Premium = request.form("Expiring_Premium")
if (request.form("Expiring_Premium")) ="" then Expiring_Premium = "Null" else _
Expiring_Premium = request.form("Expiring_Premium")
Any ideas on how i can strip off the $
SQL Update
I'm looking to update a column in a datebase that has null values with N/A and I'm using this:
UPDATE tbl_members
SET branch_no = 'N/A'
WHERE branch_no = NULL
The only reason I'm trying to do this, is because I can't seem to do if statement on a null value.
Update Box
This is hard to explain, but I have wanted to know how to do this. Say you have a website, and you have a news box(where you can report all of your news), made of a picture(s), you know like something that says "news" at the top of the 'box', and the sides of the 'box' are a picture. I have wanted to know how to make one of these 'boxes' without having to use the <div> tag, and type as much text in there as i want, and it wouldnt mess up a table or anything, or realign it, because the <div> automatically wraps around the text, fitting perfectly to it. I was wondering if you can 'wrap' around the text without a <div>, but with pictures. Here is an example, this picture called ex.gif.
I know it is a link menu, but what if you wanted to add a couple more links. How would you get the 'box' to automatically resize so that it does not messup the table. I am not even sure if this is capable in ASP, but I am sure somebody knows what I am talking about.
Cannot Update
I have a guestbook form that inserts the fields into an
Access Database. The database is residing in the "fpdb"
folder that was created by FrontPage. The ASP page that
writes the data into the databse uses the
"recordset.addnew" method. The code was working fine a
couple of weeks ago, and now all of a sudden the error
message "Cannot update.Database or object is read-only"
pops up. The ASP code or the database was not changed or
modified in any way, neither were the permissions for the
account.
Asp Update
I have quite strange problem and hope you guys can help me out or provide me with some tips.
when using a update script:
UPDATE categorys SET main_cat_default= '0', banner= '', b_link= '', external_text= 'Nâkotnes parks', name = 'Arzemju muzika' WHERE (id = 115)
Then it messes up field EXTERNAL_TEXT. Instead of Nâkotnes parks it saves it as Nakotnes parks.
But! when I open Enterprise manager and type in Nâkotnes parks manually then it saves it correctly. So I believe there is something with update command or smthing like that.I changed collation also to Latvian and this did not work.
Update My Own App
For laptop users who have an ASP application running on their laptops
- is there a way I can have it check when connected to the network
(via the FSO lastmodifieddate) which files need to be updated
(enhancements, etc.), then shoot the ASP pages that have changed down
to the client?
Update Db
I'm using the following code:
rs.addnew
rs("application")=body
rs.update
body is containing a lot of text with vbcrlf in it.This is basically a form that is emailed and I want to save it to a db just in case the emails don't go through.
For some reason the field in the db (access) is only containg the first line until the first vbcrlf
Will Not Update
I am updating some pages "font "style color size" and a few words in several of my asp pages. Most of them will update but I have a few that refuse to even after rebooting the server and clearing the cache on my current computer.
View Replies View RelatedRSS Update
I was able to generate an RSS for the news I provide with ASP and MS SQL backend. When I opens it its working fine with any RSS reader, But its not getting updated, when I update the feed. Its showing the one which I made the day one, How to rectify and what could be the problem.
View Replies View RelatedSql Update
Any ideas why this is not working?
SQL = "UPDATE Answers SET Answer = '" & Replace(FieldValue, "'", "''") & "', UserName = '" & UserName & "', SurveyDate = '" & SurveyDate & "', Respondent = '" & Respondent & "', CompanyName = '" & CompanyName & "' WHERE QuestionID = " & QuestionID & " AND IntervieweeID = " & ID & " "
This is what it prints:
UPDATE Answers SET Answer = 'Answer Test', UserName = 'John Doe', SurveyDate = '08/03/2004', Respondent = 'Respondent Name', CompanyName = 'Company Name' WHERE QuestionID = 1705 AND IntervieweeID = 5
Get Value For Update
I have a database that has numbers in the fields, is there a way I can use the update command to take the value that is already in the field and add another value to that value. The value I want to add to the value alreay in the db is stored in a variable.
View Replies View RelatedUpdate Does Not Update
What I'm trying to do: I have selected one record on the asp page and I want to replace that and save it to the same record. It is a table with two fields (Website and Updwebsite).
When I open the page, the correct data I want to edit is given, but when I change that and submit, the same data is returned and I even don't get an error on the page. So, I think it has something to do with the update query. Code:
Update SQL
how can i trigger a SQL (update query) by clicking a button in a asp page without further action in another asp page? Most grateful if some examples can be referred.
View Replies View Related