I am attempting to learn how to use the SOAP toolbox and WSDL to communicate with an online service.
I am using ASP to post a SOAP-envelope which is in the format required by the target server, and then recieves the response text which in this case should be a small amount of xml saying that login was OK or has failed.
I'm not sure if i should post this here but what i'm trying to do is create a wsdl, i'm using sql and asp and flash. well i'm trying to use all of these. from what i'm understanding i need to create a wsdl.
how do i go about doing this, i'm currently reading w3schools so i might be able to figure it out but i would like your input.
I have a web application running inside an organization and I need to post some data to an asp page sitting outside the organization
How do I get failure or success error from the outside page? currently I am using IFrame,but I wonder if I get 404(server down) how do I know I go an error?
BTW:since it is an organization i am open to other solution,cause i might be able to install activx,NET components or any other stuff.
Can any one point me how I can use classic ASP to connect to a dot net SOAP webserice? The other company has set up dot net webserivce with web address like this:
http://domain_name/webservice/service.asmx
with method Login, that can take userid and password, then sends back an authentication header(soapheader).
I am looking for tutorial and/or help on regards to accessing information using SOAP using ASP. I'm proficient in ASP, but know ver little about SOAP and XML.
I've got a particular project to do and because of my very basic understanding I'd appreciate being pointed towards a relevant example. Basically I want to have my client side stream the contents of an XML using SOAP to a webserver.
I don't want to attach an XML file, rather just stream the contents. I have to write both parts. There must be good tutorial around somewhere.
what i am reading isn't all that helpfull into sending these SOAP messages... Does anyone have a *real* usefull tutorial somewhere where i clearly shows how SOAP works? as in sending recieving...Google, isn't always kind, and ends up giving horrible confusing results.
I have been using the MS SOAP 3.0 toolkit with DIME for pulling data and files from our content server. Now I want to push files into it using SOAP with DIME attachments.
I am able to upload a file to the server and pass the file/path reference into the MSSOAP.FileAttachment30 object using this code:
I am trying to pass an array from an asp page (JScript) to a dotnet web service using the SOAP Toolkit 3.0. This is still at the Hello World stage, as you can see: ...
I have encountered some strange behaviour when using the XMLHTTP Request object in Javascript to return xml from a C# Webservice Method. I create a SOAP envelope and send it off to the Webservice, which I have debug points in, which when hit I can see that all the parameters are coming thru as null....
i am trying harder to mix this 2 solutions... but without success... the below on seen to be grabing a template and replace the data with the values posted in a form Code:
I've been researching how to send text messages and ringtones to cell phones. I've found out that one way is to use ASP which I can handle a bit. Thing is that it seems that you have to subscribe to a pretty costly service that will transmit your messages. The only exception I've found so far is http://smsonweb.www1.dotnetplayground.com/ksms.asmx?op=SendSMS but it doesn't seem to work. Does anyone know of any other free services for this or where I can find more info.I'm not looking to develop any commercial software just to learn something new.
Does anyone have an example of ASP streaming XML? Can I set content headers to indicate the page returns XML? Can this XML be a string or must it be prepared with DOM? I need to create an ASP that queries Access and Oracle,combines the data and returns it as XML.
I want to know something about how to send sms trough ASP,Any help regarding this very much appreciable,If some one have the Sending SMS Script then let me know.
I have the code for the sending mail but i do not know to loop it. I have been given specification saying that i should send mail after registration and deregistration.
so i have a asp page given the action function of the register form so the page updates the registration done. so i given after registration the send mail code and want to have the loop or condition for the mail to be sent to the person who updates registeration and code is as follows....
I'm 99.9999999999999999999% sure there haven't been any code changes, since the date stamps of the code are older than any email 'failures'
The email piece quit working using the mail.send. If there haven't been any changes made to previously working code, where do I look for the problem now? I restarted the SMTPservice in IIS. Our real email is hosted remotely, I checked with the admin and she said no changes were made, i.e., not blocking port 25 traffic from the gateway.
I guess this isn't ASP specific, but any ideas how to troubleshoot this?
I'm new with asp and server thing so if somoene could help me to resolve my problems it would be very great.
I'm trying to send myself an email but it doesn't work, no error message, I just don't receive any email.
Set myMail=CreateObject("CDO.Message") myMail.Subject="Sending email with CDO" myMail.From="bob@hotmail.com" myMail.To="bob@hotmail.com" myMail.TextBody="This is a message." myMail.Send
I am sending mail from ASP program. My server is win 2k, IIS 5. SMTP server is configured.
I am generating a report(purchase order) and the same sending as an email to the supplier. upto last week it was sending well. Now its returning bounce mail.
in the c:inetpubmailrootadmail contains the file(.bdr). The contents of the file are ....
I would like to know how can i nodify some users which are into my databese with an e-mail? How can i sent to them an "automate" e-mail using VB script.
<% Set Mail=Server.CreateObject("CDONTS.NewMail") Mail.To="rashwathama@yahoo.com" Mail.From="rashwathama@yahoo.com" Mail.Subject="Just testing my script" Mail.Body="Hey! I am sending this email through an ASP Page and guess what? I haven’t learnt much yet, but know that ASP is very powerful." Mail.Send Set Mail=nothing response.write "DONE" %>
But it did not work
I use Windows 2000 Server and Internet Information Service (IIS).....
Our local educational host doesn't have any COMs on their servers so I need to use the built-in (if there is one!!) mail/smtp component of ASP.net to send web form data via email.
Is there such a thing in ASP.net? My apols for the newbie question, but I'm still an ASP classic developer.
Could somebody post me an example of how to use it.
We currently have a form that is in PHP that after the user fill out the form and hit submit, this form send all the information via email to us. I like to know if there is a similar feature or way to do this in ASP.
using the code below is how to send email using asp;
<% Set myMail=CreateObject("CDO.Message") myMail.Subject="Sending email with CDO" myMail.From="martialdc@hotmail.com" myMail.To="amboy416@yahoo.com.ph" myMail.TextBody="This is a message." myMail.Send set myMail=nothing %>
but i encounter this error;
There is a problem with the page you are trying to reach and it cannot be displayed.
attached with this thread is the file (send.asp) so that you can check it for sure.
I am trying to develop a web site which involve in log in n to retrieve password. When a user forget their password they will use this service, after they enter their email address, i will send their user id and password to their email which allow them to see their user id and password, but i don know to to do this service which will automatically send email to user email address when they click the button .....
I've got an asp page that uses CDO.Message and CDO.Configuration to send an email.
I'm not receiving any of these emails normally (i.e. in Outlook), instead they all end up in this folder : Inetpub/Mailroot/Queue.
Could someone please explain what this means? Does this mean the emails have been successfully sent?...or are they waiting to be sent?
I'm pretty sure my smtpserver name is correct because i've got the same thing going in .NET and it all works ok there (as in I get an email thru Outlook). Just can't seem to get it going in ASP.
Not sure if it this relevant...I'm behind a firewall, so i'm assuming the smtpserver name is for a smart host, which is fine in .NET, but i'm not sure how that'll work out in ASP (eg. what do i set the serverport number to?)
I've just downloaded a component called AspEmail (http://www.aspemail.com). When i tried to test my code using the localhost, it require sthe address of my SMTP server inorder to send the email.
I put "localhost" as the address but i cannot send the mail for some wierd reason. I check the badmail folder just to find some mails under the "queue" folder.
I've tried the same code in a different pc, and i got a different error: AspEmail: Simple.asp Error occurred: Connection timed out.
Does any body know how to send email using that aspemail component on localhost Appreciate it.