Using Variable And Text Together
I am using a system to send mail and I want to use a variable and a portion of text together, so i am trying to do something like that:
objMail.Subject=[ text1 variablevalue ] - text2
the bold part is a variable value... i just bold it to show better what i am trying to tell... the subject donīt need to be in bold.
View Replies
ADVERTISEMENT
I'm trying to change the colour of the session("name") variable below, but not having any luck. I need the name to be a different colour than the "logged in as". Any suggestions? Code:
View Replies
View Related
I am using some code like the one below to work with a text file, modifying
its lines one by one:
Set objFS = Server.CreateObject("Scripting.FileSystemObject")
Set objF = objFS.OpenTextFile("MyText.txt", 1)
Do While objF.Line <= 26 ' --- I am reading only certain lines
'--- get entire line
strTemp = objF.ReadLine
'--- do some other stuff here
Code:
View Replies
View Related
I have a text area in my asp page:
"code"
<textarea name="content" rows=10 cols=60>
</textarea>
"end of code"
Is there any way to fill the text area with the value of a variable?]
View Replies
View Related
I'm attempting to read from a text file and output the contents into one variable that I can write to the page later. I can't Response.Write the thing because of the way our system is designed. Here's the code I got so far:
<%
set objFSO =server.createobject("scripting.filesystemObject")
path = "E:******************" & session("ENTRYPAGE") & "content.asp"
path = replace(path,"www.","")
set objstream = objFSO.opentextfile(path)
do while not objstream.atendofStream
lineText = objstream.readline
lineText = lineText & lineText
loop
response.write linetext
objstream.close
%>
All I get for output is the last line of the text file twice.
Note: The content.asp that I'm trying to load in does not contain any ASP. All of the content is HTML.
View Replies
View Related
I was looking for a method to store the contents of text file within a variable. So far I am able to read the text file and output the results using the write method. Going a step further I also wanted to replace a particular string within those same results using the "Replace" function. This works as well.
My question, how can I store the final result that write's to the screen so that I can reference it later. If you run this code, I basically want to take the verbiage that displays on the sreen and place it into a variable. Code:
View Replies
View Related
I'm turning my application into a "DLL". Everything worked fine untill I try to do a "While" in my asp code. Then I recieve an error like this:
"Object variable or With block variable not set"
My vb code look like this.....
View Replies
View Related
is there any way of passing a javascript variable over to a asp variable so
i can write it to my database.
View Replies
View Related
I have this problem in controlling a the text in a Text Area. How can I do
that for example the field size is 200, when it reaches 50 it automatically
goes to the next line. Bcoz im having problem when viewing it in my report,
it continuesly views in a strieght line and im having problem in printing.
View Replies
View Related
How do I convert an ASP variable to a Javascript variable?
View Replies
View Related
When using ASP's FileSystemObject to create text files, I am unable to get user submitted text (in Hebrew) to save as anything other than "?????". The text file is being saved in Unicode and setting the CodePage in ASP proved unsuccessful. Strangely, hard coded Hebrew text in an ASP variable does add to the text file correctly.
Any ideas of why this happens and how to get it to work correctly?
View Replies
View Related
sql = "SELECT * FROM & console &'news'"
I got that right now but i want the variable, console to be placed along with news so when it selects from the db it selects from gcnnews or whatever variable it's on. How do I do that?
View Replies
View Related
im trying to subtart one quantity from another then stick the answer in to an update statment, but all i get is an error in syntax message
variable math bit=
qty=request.form("oqty")-Request.form("qty")
sql =
sSQL="Update spares SET spares.location='"&request("location")&_
"',spares.machine='"&request("machine")&_
"',spares.part_desc='"&request("part_desc")&_
"',spares.part_number='"&request("part_number")&_
"',spares.qty='(" & qty & ") "&_
"',spares.min_qty='"&request("min_qty")&_
"',spares.updated_by='"&session("name")&"' WHERE(spares.id)=" & form_id
View Replies
View Related
I need to assign a value to a variable, but this variable name is dependant upon another variable!! I am including the code below so you can see it, cos if not I am sure you are thinking whattt?? Code:
View Replies
View Related
I have a text area which I want to limit the number of words or number of text entered into it. Is this possible?
<textarea name="textarea" cols="35" rows="5"></textarea>
In the text area above, can I say limit the person filling in the text area to say 100 characters?
View Replies
View Related
I have a form on asp page that pulls info from a DB when the page loads.
It them puts the info into text boxes on the page that are editable by the
user.
The only problem I have is say in the description text box it should
read "HP Laserjet 5Si" , it always cuts the text off where it just says "HP"
.. It does this on all the text boxes? I can't seem to figure out why it
is doing it. Here is the sample code:
With quotes around <%= vdesc%>
<td><input name="desc" type="text" id="desc" size="45" value="<%=
vdesc%>"></td>
And I tried it without.
View Replies
View Related
I have text in a field coming from a database. The text has various
forms such as:
text1
text1 or text2
text1 or text2 or text3
text1; or text2
text1; or text2; or text3
etc...
how can I parse this with a reg ex? I tried this:
(.+);? or
but it only captures 1 submatch (text1) and only if theres an "or"
after it
I'd like to get 1 submatch for each piece of text separated by the
"or", just the text itself if there is no or.
Anyone know how to do it?
View Replies
View Related
I have this problem in controlling a text in a Text Area. How can I do that, for example the field size is 200, when it reaches 50 it automatically goes to the next line. Because im having problem when viewing text in my report, it continuesly views in a straight line. Can you give me ASP code for that.
View Replies
View Related
I have text - ARI Promise, when I hover over the text I would like a box to appear with the Promise information. It would be several paragraphs that need to be formatted with paragraph and bullets. Is this possible to do? If so how would I go about it?
View Replies
View Related
I have a search page, after search returns value I want to display fields in text box instead of table.
View Replies
View Related
I am getting the above error in an asp page. Not sure why? The error details is given below. Code:
View Replies
View Related
I have many buttons that mapping many textbox, when I click button, I
want to show a string that contains button number( and the mapping
string ), but it failed.
Here is the code:
/////////////////////////////////////////////////////////////////////
<%response.write"<input type='button' name="'btUS95resone"&" a &"'
value='Save' onclick='resone("&a&")'>"%>
function resone(cnt)
{
alert("document.all.txt_note"+cnt)
}
////////////////////////////////////////////////
It seems that the component I called is not there...
View Replies
View Related
Can anybody tell me what is the asp equivalent of the php-phrase:
if (!$Variable) {}
?
Another question: is there a special syntaxis for asp conditions in condition?
I tried this code it doesn t work:
If Condition Then
If 2nd condition Then
ElseIf Then
End If
End If
And it works only when I remove the 2nd condition's End If and the ElseIf. Seems strange, no?
View Replies
View Related
I have a text file that looks like this:
Artist Name: Kiss
Song Title: Rock and Roll All Night
Running Time: 04:38
And I need to be able to get the artist name and song title in asp and display it on a website. The thing is, the text file changes with the song being played on the radio. How can I do this?
View Replies
View Related
I've been given an ASP app written with server side javascript. This app needs to get the username of the person currently logged in to windows (Request.ServerVariables("AUTH_USER") in vbscript). I found a way to get this variable in javascript, but then it wouldn't let me split it (server kept saying method not supported). So I've gave up on getting the username with javascript, and have set variables in VBscript at the top of my page. How do I access those variables within the javascript portion?
View Replies
View Related
i have a textbix name "building" inside my system where the user might input one or several building name in it seperated by a comma. How can i extract each of the value in it? For example, "PG2, PG7, PG6", i want to extract each of them.
View Replies
View Related
I have this url that loads, but in the url is the date, so I need a variable i can use so as the date changes the url is automatically updated,
View Replies
View Related
using access db and asp
i have a variable from a form
sRound = request.form("round") and for now let us say this value is 3
now i want to include that 3 in sql, but it is part of a field name which
is round3_report
cm.CommandText ="UPDATE rounds SET round" & sRound & "_report = '" & var5 &
"' WHERE Name ='" & sName & "' AND meeting = " & var4 & ""
cm.execute
this isn't working. i keep getting parameter error. i know there is a way to
join a word with a variable in order to make a field name in asp/sql
View Replies
View Related
I am having difficulty in displaying Response.Write rsVacancies("Title") variable more than once. If I remove it from the page title it displays within the description tag but does not display in both. Code:
View Replies
View Related
I am tring to search a database with an SQL statement via a web page. I am using Dreamweaver to build my page. The search works great when I hard code the table field into the Recordset. However, I would like to implement a variable on the field in the table to do the search on.
For Instance, a user can make a selection in a drop down box and then enter the text in a text field. I am having trouble implementing the drop down box variable into the code. I suspect I need the WHERE to be a variable just as the LIKE parameter but I keep getting errors. Code:
View Replies
View Related
I have one condition for getting the image in an included file. If the file which is including the included file is from parent folder if should pull the image directly from Image folder, otherwise it should change the path like Code:
View Replies
View Related
I have created the pages for a website in HTML. I need a script in ASP that displayes the HTML pages when requested (EG: script.asp?page=HTMLpage1).
<html>
<head>
<title>Test site 1</title>
</head>
<body>
<% page = request("page")
select case page
case main: <!--#include file = "index.html"-->
case "services": <!--#include file = "services.html"-->
case "case_studies": <!--#include file = "case_studies.html"-->
end select
%>
</body>
</html>
Any ideas on how to make this work?
View Replies
View Related
for example, if i have Code:
do while not c.eof
if c.fields("id")=request.cookies("id") then
response.write "This is you"
else
response.write "This is " & c.fields("name")
end if
c.movenext
loop
the request.cookies("id") does not work! no variable will work in its position, either. the 'if...then' statement above will only work with c.fields("id")="something", not a variable, like i want. how can i get around this?
View Replies
View Related