I am trying to change an existing function that currently only displays records that
fall under a criteria of
NOT(now>cdate(OTDate & ' 2:00 AM')
If I wanted to change this function to display entries that are before
6:00 pm the day before the OTDate, how could I modify this part of my
code? should is be something like this...
NOT(now>cdate((OTDate -1) & ' 6:00 PM')
I am getting the following error and not sure what it means.
Microsoft OLE DB Provider for ODBC Driverserror '80040e07'
[Microsoft][ODBC Microsoft Access Driver] Data type mismatch in criteria expression. /addgift.asp, line 18
Code:
I'm getting the error: Data type mismatch in criteria expression every time I try to run this bit of code:
View Replies View RelatedNoob question I'm getting errors with the following code
Code:
processevent = Request.QueryString("processevent")
SQL = "Select * From shimlog Where ID = '" & processevent & "'"
Rs.Open SQL, Conn, 3, 3
Is giving following error
Microsoft OLE DB Provider for ODBC Drivers error '80040e07'
[Microsoft][ODBC Microsoft Access Driver] Data type mismatch in criteria expression.
/area51/shimlog.asp, line 53
Read MS webpage and using some :'s in there somewhere could not get it to work
This should be an easy one, but I can't figure it out. I am getting the error:
Data type mismatch in criteria expression.
Here is my SQL:
SQL = "UPDATE Revision SET Contact='"&Contact&"', ID='"&ID&"', TR='"&TR&"' WHERE TrackingNum='" &TrackingNum&"'"
TrackingNum is an autoNumber in two of my tables in my database (IME_request) the table names are revision and IME_request. I pull the data from IME_request.IME_request and then I update IME_request.revision with the form values.
I did a response.write to make sure I was getting to form values, and I am.
What's wrong with the following code?
Set objRS = server.createobject("ADODB.Recordset")
strSQL ="SELECT Content FROM thread WHERE ThreadID='"& strQuoteID &"'"
objRS.Open strSQL,objConnection,3,3
I get this error:
Data type mismatch in criteria expression
I am trying to test a sql statement in Access which gives me
the error as stated in the heading.
The sql statement is built as a part of asp login verification,
where the userid and password are input in login screen.
The password in the database is a number field.
I am writing the dynamic sql statement as follows below. I believe
I am going wrong in the password section of the code:
I am trying to insert the fields into the DB by quering an insert statement in my form
i get the following error on line:
objConn.Execute(strSQL)
Microsoft JET Database Engine (0x80040E07)
Data type mismatch in criteria expression.
Does anyone know how to combined two select fields and convert it into date using CDate()?
I would like to make up 2 selects option in a form
select 1 is for month and select 2 is for year. when user select the desired month and year, these 2 fields will be converted into date format using CDate() but unfortunately I am having problems as CDate only recognise string and single value...
I tried to combined the 2 values using
mydate = Request.Form("month") and Request.Form("year") but alway returned an error. How do you combined these 2 values so I can get single value to be inserted into the CDate() function?
I have a form where the user enters some information, one field is a date. I have a date 04/18/1982 I'm using CDATE to convert from string to date format so it can be inserted into access.
It works fine if the field is not null. If the user leaves the field null i get page not able to display, is there any way to use CDate with a null value?
why this is giving me a 'type mismatch' error on the last line with the (CDate) when i use it with SA-Fileup and everything works fine when I am not using SA-Fileup. Checked out the SA-Fileup docs and couldn't find anything.
here it is.Code:
Set oFileUp = Server.CreateObject("SoftArtisans.FileUp")
eventStartDate = oFileUp.Form("sYear") & "-" & oFileUp.Form("sMonth") & "-" & oFileUp.Form("sDay") & " " & oFileUp.Form("sTimeHour") & ":" & oFileUp.Form("sTimeMinutes") & ":" & oFileUp.Form("sTimeSeconds")
Can anyone tell me why this is giving me a 'type mismatch' error on the last line with the (CDate) when i use it with SA-Fileup and everything works fine when I am not using SA-Fileup. Checked out the SA-Fileup docs and couldn't find anything.
Code:
Set oFileUp = Server.CreateObject("SoftArtisans.FileUp")
eventStartDate = oFileUp.Form("sYear") & "-" & oFileUp.Form("sMonth") & "-" & oFileUp.Form("sDay") & " " & oFileUp.Form("sTimeHour") & ":" & oFileUp.Form("sTimeMinutes") & ":" & oFileUp.Form("sTimeSeconds")
eventEndDate = oFileUp.Form("eYear") & "-" & oFileUp.Form("eMonth") & "-" & oFileUp.Form("eDay") & " " & oFileUp.Form("eTimeHour") & ":" & oFileUp.Form("eTimeMinutes") & ":" & oFileUp.Form("eTimeSeconds")
ESDT = CDate(eventStartDate)
I have a VBScript function:
<script language="VBScript" type="text/vbscript">
Function Main()
set wshshell = createobject("wscript.shell")
struser = wshShell.ExpandEnvironmentStrings("%USERNAME%")
strdomain = wshShell.ExpandEnvironmentStrings("%USERDOMAIN%")
msgbox struser & strdomain
End Function
</script>
That works great as a Active X script but I want this to display as a value in a text field and I can't find how o do that.
there is a JavaScript/ASP function that that will check for new Private Message (PM) Inbox. New PM will be referred as "NEW" in the status field in the database and "READ" for all the old PM.hen there is a new PM, a popup will appear in my page. But I have to press the REFRESH BUTTON before I get the popup ALERT!
Can this be done in AJAX? (Alert me without refreshing the page?)
May I know how to use the ASP to display the data from database in the format of data grid or table? If possible, please provide coding.
View Replies View RelatedI have a database for my users orders, and I what a search for the admin to search for the orders in a specific user and display them in a chart.
View Replies View RelatedI Have a list of groups that are assigned to users. I want to list groups for a particular user in order by name. I want to then have a drop down list that shows all the groups that the user is not in at the moment. Users can then add groups to that user.
How i have it setup:
I have a table that has an id and group name.
I have another table that has id, userid and groupid
Do anyone have any ideas how to diplay it. Keep in mine that the groups have to be in order of the group name. Thats tge part that is confussing me.
I am creating a resource website and pulling from an access databse, I have 1 page that loads with a list of catagories, when you click a catagory the page reloads with a querystring attached that loads only the contents of that catagory.
All of this is coming from the same table in the database, I have an ID column that is shared by the articles in the same catagory.. (i.e. ID is set to 1 for all the items in catagory 1, set to 2 for all in catagory 2 and so on).
I currently have articles in about 6 of 16 catagories. Everything displays fine but if you click on a catagory that has no articles, I would like a message to appear such as "There are no articles found for that catagory". How can I get the ASP script to see that there are no (we will say) entries for ID 8 in the databse, and display the message.
We're working on creating a site that tracks club sports results - we originally created a form that inserts the results into a database, but the folks using it have decided they'd rather enter the information in a spreadsheet and upload it.
what is the best practice for this data - should I write some code that just reads the content of the excel file and displays that on a results page or should I take their data and import it into the database we initially designed.
here is an RSS feed for top stories from a local news station. http://lex18.com/Global/category.as...&clienttype=rss.I need to display this data on my own website. I know ASP, but not XML.I have read some documentation and browsed websites, but I cannot figure it out.
View Replies View RelatedI know this is probably a stupid question, however I'm trying to display the contents of a recordset into columns spanning across the page rather than down the page,
i.e.
CATEGORY CATEGORY2
subcat1 subcat1
... subcat2
And so on. This is a 2 column table that I want to use. But I don't know how once one column is long enough then go across to the next column and fill that column with the remaining data. I know its simple if you have go down a page, but can't figure out to go across.
Someone asking me in the PM yesterday. How did I managed to display data in 3 cols & rows i.e category,sub-cat, search result and form in CSS table-less layout?
I have use it in my site article,freeware,recipe,link directory,lyrics,template and games section. I was able to display the data in 3 cols and rows using CSS layout. It took me quite a while to figured it out. In ASP, you should know where the loop start and end, otherwise the div container stack up each other. I was thinking of writing a tutorial with sample code in ASP. Maybe next time.
My next project is to convert Maxwebportal and snitzforum into CSS layout. To see an example, visit my site and go to this section of the site: article,freeware,recipe,link directory,lyrics,template and games. These pages are CSS table-less layout.
how do i get data from a user on one page and display the result on the other page
actually i have written a prgoram that displays a set of checkboxes and based on the checkboxes selected the related data is displayed .but the problem is the data is displayed on the same page below the list of check boxes. Code:
I want to display a system maintenance notification on my webpage using a splash screen. I got the code for splash screen from Dynamic Drive and added it on my web page. Now here is my problem. I have created a table in my SQL database with these two fields, Flag and Description. I am trying to connect this splash screen to this table.
This is because-if the flag is set to 1 the splash screen will pop up and display the data in the description field on the splash screen and if it is set 0 the screen will not pop-up at all. Two things I am having trouble with-
1. Displaying the data on the splash screen. I made the connection to my db but can't get it to display it on my splash screen.
2. How to make the splash screen pop-up only if the Flag field is set to 1.
displays content IF several conditions exist or display's nothing if it doesn't?
Basically, in english this is what I'm trying to do:
IF a record exists
WHERE session(userID) = idByUserID in 'notes'
AND
WHERE userID = idAboutUserID in 'notes'
THEN
display from the record fieldnames 'LastUpdate' and 'note'
ELSE
don't display anything
Write an exe/dll (which will be better please tell me)..which has code to only control my logic or rather data conversion/manipulation of the raw data recieved thru and .mdb file and then display the exe/dll manipulated data thru an asp page.??
View Replies View RelatedI have a page that shows the skillsets our analysts are on here. We have 10 skills, each one a different recordset to pull their data, so the page takes a while to load (7 seconds). What I was wondering if its possible to do is just show the heading (the name of each skillset), but when clicked on, a response.write of somesort would show the cell underneath and then pull the data.
Hopefully it makes sense what I am saying, if not i'll try to post something up.
How to use the for loop to display all the data in database? For example, displaying the data that start with "a".
View Replies View RelatedHow i display DATA from Browser to Text file.In my web page there is a script that fatches data from this URL: http://www.rediff.com/rss/newsrss.xml and display data on the web browser.now ,how i get that displayed data from the browser to a text file.
View Replies View RelatedI try to find the best small exemple to display data from excel to asp (connection & code). But only asp.net exemples in microsoft.com.
View Replies View RelatedI would like to know if you can display only certain data into a field between commas or any other symbol without using the curshort feature. For example. I have the following.
Part, A3472, Desc: Controller: Price$ 45.00
I just need this out of it in a single form field.
A3472
I cannot use the cutshort feature because my part numbers are different lengths.
If i created three different type of table. Inside these tables, they might have the same key field's name. Example:
Table A - ExecNo, Month, Year, CustCode
Table B - ExecNo, Month Year, DestCode
as u can see that these two tables have almost the same key field but they r actually keeping different data. how can i list these different data out in an asp page? it is because i am having the problem whereby.
where the table want to display data from table B, it actually misplace by table A . how can i write the sql function to differentiate both of them.
I tried to Display data from field DB (mysql) into a Textarea to edit the text. The code I used is : Code:
<textarea name="warranty" cols="90" rows="6" class="style55" value="<%=WARRANTY%>" type="text"></textarea>
And it does not displays the data.?