I want to use validation with my ASP script before i add a new record to the database.
Code:
if UserID = "" then Response.redirect("login.asp?login=createnameEMPTY")
so far it only checks that the field is empty- how would i also check that the field is just letters and numbers or if the email field is valid?
Is this sql statement valid?
strQ = "SELECT *"
strQ = strQ & " FROM Receipt"
strQ = strQ & " WHERE Receipt.Expense ='Inventory' AND Receipt.ReceiptDate Between #1/1/2005# And #12/31/2005#"
strQ = strQ & " ORDER BY Receipt.ReceiptDate"
What I like it to do is select all references to "Inventory" under the field Expense for the entire year of 2005, with the results sorted by date ascending.
i downloaded soem code that is a way to view a MS access db with asp. The error I get is Not a valid file name. Microsoft JET Database Engine error '80004005' . I know it might not be enough information, but anyone have any clues? Code:
View Replies View RelatedIf you use ASP.NET you can still make valid xhtml code right? Becuase Visual Studio .NET 2003 doesn't care if it's <br> or <br /> thats bad in my opinion =) You know if Whidbey will make better xhtml?
View Replies View RelatedThe field name 'articleid', which is an identity/primary key , is not being recognized in my recordset as I get an " Item cannot be found in the collection corresponding to the requested name or ordinal" error with the following- the line number that the error message points to is on my response.write for the rsid("articleID") :
dim sqlid,rsid
sqlid = "SELECT max(ArticleID) from tblarticles"
Set rsid = Server.CreateObject("ADODB.Recordset")
rsid.Open sqlid,sqlc,3
response.write rsid("ArticleID")
I'm using a ACCESS database that has a databasepassword. In the connection string I'll provide the password as follows:
MM_test_STRING = "dsn=test;pwd=test;"
This works fine on IIS 5 but on IIS 6 on Windows Server 2003 I'll get the
followwing error:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Not a valid password.
When I'll remove the password the DSN works fine also.
When I'm trying to start the smtp virtual server the status of the smtp server is showing 'the requested Control is not valid for this service'
Its state is shown as unknown.Wat ay be the reason.
The messages I'm sending is going to the pick up directory from there its not taking
Is this a valid name for a session variable:
Session("mySessionName:$SO")
If so, does the " :$SO " mean anything special? I'm going through a web application written by somebody else (who I don't have contact with...) and it's littlered with these types of session variables.
I have one asp page in which i ask the user to enter the path. This then transfers the control to next asp page. In the next page i want to check whether the path is valid or not. I know there are methods of FileSystemObject like DriveExists, FolderExists and FileExists but these has to be used individually.
Suppose the user enters the path as "D:" then i should use DriveExists
and if the user enter the path as "D:/test" the i should use FolderExists
i.e i have to use individual functions. How to check this using one function only
Another problem is that i want to display the message on the page for some seconds and then the control should transfer to next page. How do i go about it.
I use the following code to chck for a working url. It does work for some, but sites that seem to be written in PHP, and google, seem to return a "fail" - I can't figure out how to get p-ast this.
Dim objHTTP
Dim sHTML
Set objHTTP = Server.CreateObject ("Microsoft.XMLHTTP")
objHTTP.open "GET", strURL, False
objHTTP.send
sHTML=objHTTP.statusText
if err or sHTML<>"OK" Then
sTxt="fail"
else
sTxt="ok"
End if
Set objHTTP=nothing
else
sTxt="fail"
End if
Say I retrieve and e-mail adress from a form like this, then I know how to check that it's not empty, contain numbers etc. but I don't know how to check that the e-mail complies with some kind of regular expression or the like.
Therefore I wonder if you have any good e-mail form validation code that can be used on the server side (comparable to Java Script reg.exp on the client side).
<%
Dim mail
mail = request.form("email")
IF mail = "" or mail does not complain with some kind of reg. exp THEN
some code....
End IF
Create the following code from database but does not validate on enter - I am using ShadowWizards validation code.
<Input fields so work however I will need dropdown and radio buttons to be validated also.
I really like the work ShadowWizard has put in and would like to continue in the same neat, cleaver coded way!
I did validate the few fields with ASP but Yahoo toolbar stops people going back on forms and therefor would not work on all PC's, typically the bosses and now he seems to want it asap so any javascript solution? Code:
I am now all of a sudden getting an error in this sql connection
string, saying that the Provider keyword is invalid:
<add key="MM_CONNECTION_STRING_isox"
value="Provider=SQLOLEDB;SERVER=xx.xx.xx.xx;UID=xx;PWD=xx x;DATABASE=xxxx;"
/>
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Not a valid bookmark.
has anybody seen such types of errors?
how to write to check verification valid email thru nslookup or mx record or dns record. Is it possible to do that. Is there any tutorial from sitepoint, previously found it but i lost the link.
example to check assume test@domain.com is not a real email, abc@domain.com is real email
how do u check it.
I have a validate.inc file for my form (ASP). I want to make a validation without external file, i want to write it in the main page, where the
whole code is writing, like validation in ASP.NET, a link about that will be helpful too.
Can anyone tell me if there is a way to validate form fields using the dreamweaver server behaviours except using javascript. Basically I need a method of validating each form field when the form is submitted. I don't want to use javascript as I know that users can switch 'active scriting' off, which disables javascript. Due to the forms being critical inputs within an e-commerce system, I must validate them 'server-side'. Is their a dreameaver extension that does this or has anyone over come this issue before?
View Replies View Relatedi want to use javascript to identify whether the user clicked on the hyperlink or not.How can we recognize that one.Here,i will explain my problem clearly. I have one small application in ASP. Application consists of one textbox,one button and one hyperlink like contact us.
If the user click on the button without enter his name or choose contact us hyperlink, then the validation message box will be displayed.How can i do validation for <a>tag.I know the validation for button Like same way i tried to use name attribute to <a> tag and tested,but it gives errors and not worked.How can i solve this problem.
I've just started using ASP.NET
I've made a simple form with 2 webform elements. I've attached a
RequiredFieldValidator to each of these.
On my local server this work perfect, but when I upload the files to my
webhotel, the validation seems to be ignored. Everything else works though
Could it be that the webhotel is running an old version of the .NET
framework?
I know little bit about asp, I am facing a problem in Validating
the ASP Form..
Example:
Stud ID: 501242016
FirstName: Ajit
LastName: Kar
These Fileds are there in my form and I am able to Insert it into
Database.
But My problem is I am not able to restrict the Stud ID to 9 digit and
if First Name , Last Names fields are empty I want to display a message
telling please fill the Following fields. Code:
I have two pages, one called "test1" and another called "test2" Is there any way I can check that a person has come from test1 when they go to the url "test2"? Or would it be easier to create a session on test1 and then check for that session on the test2?
If the latter, then can someone point me in the direction of a tutorial suitable for this?
I have to validate memberid based on the userid. for example i have a form which i should submit and validate a single input box based on the userid if user id=10 users should type the memberid without memberid the form should not be submitted. for other users member id is not mandatory it can be null. how to validate memberid for not null based on the userid in a single form.
View Replies View RelatedI have individual dropdown boxes for selecting day/month/year for start date and then the same for selecting end date. I have two javascript functions for validation.
I have one submit button on the form.
The asp code is below. I know each javascript function works in its own right. That is posted below the asp. My problem is to get the functions to validate both start and end dates on one click of the submit button. How it is at the moment, it will validate the first - start date- but throws an error (type mismatch CDate)on the End date.....
I have been trying to use a function that checks that an email is syntactically correct (ie. it contains @ and .), however I have given up with the method I was trying - at the end of my tether I was. I would like something in the form of one of my other validation msgs below. Any ideas? Code:
View Replies View RelatedIs there a way to validate a text box to make sure that the text field, which will house an email address, is in the proper format of name@domain.com/net etc?
View Replies View RelatedI had some trouble last week trying to validate an email address in my Register form, but was unable to get it working.
Below is the function I used: ....
I want to create a password validation system..... There are two text boxes.... I want to make sure that the passwords are the same and that they are more than 8 characters.
View Replies View RelatedCan I put a validation on the standard submit button on the form? I want the user to necessarily select a radio button on the page? Or should I be using a notmal button with an on_Click event? In that case how will I push submit?
View Replies View RelatedIm dynamically generating the contents of a form with details read from a text file and the names im assigning to the controls are also dynamic.[The Labels of the Control.]
The problem now is that, i dont know how do validate these controls for the mandatory check!!
[Is there any option to iterate the entire controls present in a form??]
I'm working on an application in ASP.NET VB. It's a complicated online order form. Here is my issue. There is a large amount of data that is validated before the form can be submitted.
The validataion works in IE perfectly but doesn't work in FF. In FF it'll actaully let you submit a completly blank form. I'm sure I'm missing something small.
Here's some of the validation and if you need more i can post it. Code:
I know this is gonna sound silly but when I submit a form with a checkbox
html control "mychk", how can I see if that is checked or not ?
I have tried :
if request.form("mychk") = true then
' code
else
' code
end if
But it always executes the code in the else statement meaning it is never
true despite the fact I have given the checkbox a value of true.
I have one field in my form......
Code:
PDF:- <input type="file" name="File1" id="File1">
I only want to upload pdf files so if someone enters gif or jpg or bmp it should tell the user
only pdf files allowed
so i want to check the last 3 letters after the dot(.)
can someone tell me how to write this validation function
Ive been looking everywhere for some simple street address validation. All I can find is email. Im not that great at working with string because I forget a lot =P but how can I check a string so that the format is like a street address.
str = "1015 Salem Street"
If street address is correct then
strsql(insert...
else
Invalid Street address