Is this sql statement valid?
strQ = "SELECT *"
strQ = strQ & " FROM Receipt"
strQ = strQ & " WHERE Receipt.Expense ='Inventory' AND Receipt.ReceiptDate Between #1/1/2005# And #12/31/2005#"
strQ = strQ & " ORDER BY Receipt.ReceiptDate"
What I like it to do is select all references to "Inventory" under the field Expense for the entire year of 2005, with the results sorted by date ascending.
i downloaded soem code that is a way to view a MS access db with asp. The error I get is Not a valid file name. Microsoft JET Database Engine error '80004005' . I know it might not be enough information, but anyone have any clues? Code:
View Replies View RelatedIf you use ASP.NET you can still make valid xhtml code right? Becuase Visual Studio .NET 2003 doesn't care if it's <br> or <br /> thats bad in my opinion =) You know if Whidbey will make better xhtml?
View Replies View RelatedThe field name 'articleid', which is an identity/primary key , is not being recognized in my recordset as I get an " Item cannot be found in the collection corresponding to the requested name or ordinal" error with the following- the line number that the error message points to is on my response.write for the rsid("articleID") :
dim sqlid,rsid
sqlid = "SELECT max(ArticleID) from tblarticles"
Set rsid = Server.CreateObject("ADODB.Recordset")
rsid.Open sqlid,sqlc,3
response.write rsid("ArticleID")
I'm using a ACCESS database that has a databasepassword. In the connection string I'll provide the password as follows:
MM_test_STRING = "dsn=test;pwd=test;"
This works fine on IIS 5 but on IIS 6 on Windows Server 2003 I'll get the
followwing error:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Not a valid password.
When I'll remove the password the DSN works fine also.
I want to use validation with my ASP script before i add a new record to the database.
Code:
if UserID = "" then Response.redirect("login.asp?login=createnameEMPTY")
so far it only checks that the field is empty- how would i also check that the field is just letters and numbers or if the email field is valid?
When I'm trying to start the smtp virtual server the status of the smtp server is showing 'the requested Control is not valid for this service'
Its state is shown as unknown.Wat ay be the reason.
The messages I'm sending is going to the pick up directory from there its not taking
Is this a valid name for a session variable:
Session("mySessionName:$SO")
If so, does the " :$SO " mean anything special? I'm going through a web application written by somebody else (who I don't have contact with...) and it's littlered with these types of session variables.
I have one asp page in which i ask the user to enter the path. This then transfers the control to next asp page. In the next page i want to check whether the path is valid or not. I know there are methods of FileSystemObject like DriveExists, FolderExists and FileExists but these has to be used individually.
Suppose the user enters the path as "D:" then i should use DriveExists
and if the user enter the path as "D:/test" the i should use FolderExists
i.e i have to use individual functions. How to check this using one function only
Another problem is that i want to display the message on the page for some seconds and then the control should transfer to next page. How do i go about it.
I use the following code to chck for a working url. It does work for some, but sites that seem to be written in PHP, and google, seem to return a "fail" - I can't figure out how to get p-ast this.
Dim objHTTP
Dim sHTML
Set objHTTP = Server.CreateObject ("Microsoft.XMLHTTP")
objHTTP.open "GET", strURL, False
objHTTP.send
sHTML=objHTTP.statusText
if err or sHTML<>"OK" Then
sTxt="fail"
else
sTxt="ok"
End if
Set objHTTP=nothing
else
sTxt="fail"
End if
Say I retrieve and e-mail adress from a form like this, then I know how to check that it's not empty, contain numbers etc. but I don't know how to check that the e-mail complies with some kind of regular expression or the like.
Therefore I wonder if you have any good e-mail form validation code that can be used on the server side (comparable to Java Script reg.exp on the client side).
<%
Dim mail
mail = request.form("email")
IF mail = "" or mail does not complain with some kind of reg. exp THEN
some code....
End IF
I am now all of a sudden getting an error in this sql connection
string, saying that the Provider keyword is invalid:
<add key="MM_CONNECTION_STRING_isox"
value="Provider=SQLOLEDB;SERVER=xx.xx.xx.xx;UID=xx;PWD=xx x;DATABASE=xxxx;"
/>
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Microsoft Access Driver] Not a valid bookmark.
has anybody seen such types of errors?
how to write to check verification valid email thru nslookup or mx record or dns record. Is it possible to do that. Is there any tutorial from sitepoint, previously found it but i lost the link.
example to check assume test@domain.com is not a real email, abc@domain.com is real email
how do u check it.
If a user enters in this to search a db
"Jon Doe" James Doh
return all of the exact matches Jon Doe (user uses quotes to clarify an exact search)
along with that: return all of the James and all of the Doh as well
qry to look like this as soon as I am able to divide up the string entered in by the user
select * from table where (NAME LIKE '%Jon Doe%') or
(NAME LIKE '%James%') or (NAME LIKE '%Doh%')
Thinking of using the instr to find the " but then what do I do to find the string inside of the two quotes, One quote would be easy. there is a couple of checks to preform:anyone run into this before or have any ideas/samples, etc
I have created a query wizard page with ddl as your choice to find info. now each ddl has a default of a dash.
The thing is I want to do is have the sql statement to look through the database even when some of the ddl have a dash on them. or just ignore the ones with a dash and look for the ones that are selected. Is there any suggestions for this.
Below is my code for a question system i have created. However, i need to insert an if statement that redirects the user to test.asp if the value of q_id is not in my database, but i dont know how to do it?
<%
q_id = request("q_id")
sql = "SELECT * FROM questions WHERE PARENT_ID = 1"
Set objRS2 = Server.CreateObject("ADODB.Recordset")
objRS2.Open sql, objConn
sql_sql = "SELECT * FROM questions WHERE PARENT_ID = " & q_id
Set objRS3 = Server.CreateObject("ADODB.Recordset")
objRS3.Open sql_sql, objConn
%>
my AND statement is not working and I dont know why????
sql = "SELECT * FROM calls WHERE tech=" & userID "AND status = Open"
tech and status are the DB fields
userID is a variable
Open is just a word
i make a form with an AccountId box on it , when u enter the accountid in the box , and submit it will send u to a page that show u all the data for this accountid(retreive data)
until here everything is ok , and when i enter for ex. accountid : 5 , all the aacountid fiel data will be show to me , but the problem when i enter am unvalid accountid , it will give the error page that
what iwant to do that i want when i enter an unvaildaccountid an error text show to me like
response.write("The Id that u entered is unvaild , Try Again")
and this is the code , if u can change on it Code:
I am trying to use the following IF statement, and whenever I use a
single or double quote, I receive a syntax error. When using no
quotes, the syntax is accepted, but the statement does not perform
properly.
***The problem line***
<% if violation_type=''Tardy'' THEN %>
***rest of the statement***
TARDY VIOLATIONS
<% if rs2.Fields(0) = 0 THEN %>
This is the first unexcused Tardy violation for this employee. A
coaching is required. Click <A HREF=blah>HERE</Ato issue the
coaching.
<% ELSE %>
This employee has <%response.write(rs2.Fields(0))%previous
violations.
<% END IF %>
<% ELSE %>
The <%response.write(violation_type)%violation has been recorded.
<% END IF %>
Variables defined:
violation_type = request.form("violation_type")
On a page with a form (post method) and a hidden field "Process value = true", why would this statement not work:
<%
if request.Form("Process") = "true" THEN
The code in here sends an email to the user via CDOSYS
End IF
%>
This is what I have going on and it does not send the emal when the form is posted. Removing the If statement obviously sends the email the moment the form page is accessed, but thats not right.
i have a couple of if statements and it goes something like this, the user will try entering their username and password in the login page then they will be taken to a verify page, then it will decided if the user can be send to the login page again or to the invalid page. The problem is that after 3 times the user is still send to the login page and not the invalid page My verify page code is :-
<%
session("try") = try
if try = "" then
try = 0
else
try = try + 1
end if
if try <> 3 then
response.redirect("login.asp")
else
response.redirect("invalid.asp")
end if
Recordset1.Source = "SELECT `bestsellerslists`.`itemnumber`, `bestsellerslists`.`list`, `products`.`Product_ID`, `products`.`Product_Name`, `products`.`Price`, `products`.`Sale_Price`, `products`.`Smallpic` FROM `bestsellerslists` INNER JOIN `products` ON (`bestsellerslists`.`itemnumber` = `products`.`Product_ID`) WHERE (`bestsellerslists`.`list` = "girlinfant")"
In Macromedia, the recordset tests fine. When I start the page, I get an error. Do you see anything wrong with this? If I delete the WHERE clause it works.
I'm having a problem with my variables. They print to screen fine, but when I try comparing them, they don't work. Can anyone tell me what I'm doing wrong?
If Category <> CurrentCategory then
response.write "<tr><td>Category:" & Category & "</td></tr>"
response.write "<tr><td>CurCategory:" & CurrentCategory & "</td></tr>"
else
response.write "<tr><td>hello</td></tr>"
End If
Code:
I am passing in values either customer id (key) or their names (name) from a form .
You don't have to use both the id and the name to search for the customer however I don't know how to do this!
If the keyform = "" then , use the name to find the customer
else
can't find it! this is what I have at the moment :
keyForm = Trim(request("key"))
name Form = Trim(request("name "))
Dim name , cyfeiriad, tref, sir, codpost, ebost, ffon, cyfrif, dyddiad
Set dnsSQL = g_con.Execute("SELECT key_user_accounts,name ,cyfeiriad,tref,sir,codpost,ebost,ffon,cyfrif,dydd iadcreucyfrif from cwsmeriaid Where key_user_accounts = " & keyForm & "
if not name = "" then and name = '" & nameForm & "'")
else ")
end if
ii am using a statement to send a query to the SQL server and i am getting errors like expected end of statement.
what might be the problem and do i use a statement like this for dynamically assign values or it's better to use stored procedures.
dim mySQL="Select * from logindetails where loginname='" & logname & "'"
what am i doing wrong:
SELECT * FROM Tablename WHERE Content LIKE '%Netcapa%';
this is the error im getting
ADODB.Recordset error '800a0bb9'
I was wondering how do you arite an SQL statement that only displays the list of projects from the last 30 days (i do have a date field as well)
View Replies View RelatedI have this code:
<%=strContent%><br><%=getData("News", "TOP 5 *", 1, 0, "News_title", "News_Date", "News_Id", "news.asp", "100%")%>
which brings back news data from the db
how can I write an IF statement to check if the news page is displaying an id and if it so not display the code... ie Code:
I'm fairly new to coding in asp and i'm trying to create a simple if.. else... condition.
It's for asp web page, and is linked to my database, but i figured since it's a basic question, it would belong in the General newsgroup.
All i am trying to, is, on my web page I have a table cell, that feeds off my database.
If there's something in the database in that particular field, then I want it to be displayed, If not, then rather the cell return a blank field, I want a picture from another field.....
How can I do the following:
If recordset is empty, redirect to page1 but if recordset has something in,
redirect to page 2.
How can I use an "IF" statement to decide what to write depending on the content of a field. I've usually been just designing my database around using
if isnull(rs_events.Fields.Item("f_register")) then response.write("")
But I would like to change my current schemas so that I can make a smaller database, so that
if (rs_events.Fields.Item("f_register")) = "Yes" then response.write("Yes") else response.write("No")
How can I acheive this?
I'm trying to write an if statement that shows a message if there are no records to display that match my select statement:
employment_op.Source = "SELECT Employment_Display, Employment_Link, Employment_ID, Employment_Category, Employment_Position_Title, Employment_Qualifications, Employment_Description, Employment_Application_Details FROM dbo.hr_employment_opportunities WHERE Employment_Display = '1' AND Employment_Category = 'Staff' ORDER BY Employment_Position_Title"
I was trying to use
<%
if employment_op_numRows = 0 then
response.write "No Current Openings"
end if
%>
Which doesn't return anything - can somone please tell me what I'm doing wrong?