I am using the DateDiff function to compare two dates in a query on a page. I then need to use the "Expression" created from that DateDiff function in a WHERE clause calculation, but it is not working correctly.
The page loads successfully with thre recordset populated, but the WHERE clause has no effect on the data. I'm guessing that I am doing something very wrong, but I have been staring at this for hours with no avail!
I am trying to modify the code in an existing ASP page that displays records when it runs. The code in the where clause I wish to change is as follows:
where_clause = where_clause & "[DateWOCancelled] Is Null And IsNull([ACT_IS]) And ([PROP_IS] < Now())"
This works fine, but I need to have the clause also evaluate another field (Rev_IS) to see if it contains a date, and if it does check to see if it is < Now(). If the Rev_IS is not null, I don't care any longer about the date contained in Prop_IS. I only want to evaluate if Rev_IS < Now().
I'm starting in asp and I'm trying to do a simple sql query to display a number of records on a page using the limit clause. I keep getting a syntax error in my from clause. Here's what I'm doing:Code:
rstProd.Source = "SELECT * from TBL_PRODUITS LIMIT 0,10"
I have no problem using this clause with PHP so I was wondering if there's some restrictions with it in ASP??
Got a bit of code, which I want to loop through, unless the current value is "", in which case I need it to skip to the next one, but how do I do it?
Response.Write "<br />" & vbCrLf For Each strItem In Request.Form If strItem = "" THEN 'these next two lines, I only want to be processed if the above does have a value in it Response.Write "-" & strItem & "-" & vbCrLf Response.Write "-" & Request.Form(strItem) & "<br />" & vbCrLf End If Next Response.Write "<br />" & vbCrLf
select distinct c.execno, c.month, c.year, ISNULL((s.shift* 7.17 * l.mainuph),0) AS Capacity, s.shiftdate from mainline m left outer join custorder c on m.execno = c.execno left outer join execmaster e on e.execno = c.execno left outer join model l on e.model = l.model left outer join mainshift s on s.line = e.line where l.model = 'gbm 10' and Month(s.shiftdate) = c.month order by s.shiftdate, c.year, c.month
after i have a join table. the higlighted part, when i put it in my asp page.can i just call out to do some other calculation. maybe that capacity i take it out to do some other calculation? is that possible?
Depending on the percentage given, each section gets a pass or fail and there is then a final pass or fail calculated within the page I want to display the information. What I would like to do now is show a sort of traffic light image, green, amber or red depending on which sections are passed:
Green if all sections passed, Amber if any section failed but still achieved a pass mark and Red if the student failed to achieve the overall pass mark. Code:
I am trying to connect Flash with ASP. I did few examples successfully, but I am stack on this one and I get error from the sql statement. I dont see anything wrong with it. The code is:
set conn = Server.CreateObject("ADODB.Connection") conn.ConnectionString = "Driver={Microsoft Access Driver (*.mdb)};DBQ=" & Server.MapPath("example.mdb") conn.Open set record = Server.CreateObject("ADODB.Recordset") query = "SELECT * from TABLE WHERE NAME= " &action1 record.Open query, conn
The error which I get is: Error Type: Microsoft OLE DB Provider for ODBC Drivers (0x80040E14) [Microsoft][ODBC Microsoft Access Driver] Syntax error in FROM clause.
The manual way of calculating utilization on 4/3/2005 will be [(Time between 0900 to 1100) + (Time between 1200 to 1400) + (Time between 1500 to 1630)] / (Time between 0800 to 1700) X 100%
The problem is that depending on what time the next person arrives, there might be an overlap in time. For example, A comes at 9am and leaves at 11am. B comes at 9.30am and leaves at 12pm. The total duration will be from 9.00am to 12 pm that is 3 hours instead of (rs("time_out")-rs("time_in")) = (11-9) + (12-9.5) = 4.5 hours
Is there a formula or way to automate this process?
Can i calculate the next month starting day and next month ending date.For example if this is january then i need the next month that is february starting day and february ending day. I need to calculate the date in that way given below, I mean without query. Below method is i use it to calculate the todays date and the end of the day.
I've created a form where the form field integer values are added to create and display a total once submitted, but my form is displaying a Mismatch error. Do anyone have any suggestions?
When I create a ADODB.RecordSet object and then try to loop through the results, everything works fine, unless when I am done looping through the results I need to call the movefirst on the recordset object. If I happen to have used an ORDER BY in my SQL, it bombs out. Code:
I am trying to design a page that displays data from a query in groups of a field in the where clause and then displays a 'total' per each group. Code:
i got a field named register_date, its input a table named member when a user register in my system, What im trying to do is i want to display daily registration in seperate table, anyway the database im using is mdb file, and data type for register_date is data/time.
so below is my coding, but i can get the table to be displayed, can someone tell me what wrong with my coding? Code:
I have to calculate the percentage of an X amount depending on the Quarter of the year. It's driving me crazy, I can't figure out how to do it. Am I missing something. If someone registers the 1st quarter then the price is the full 1200. f the registration occurs the 2nd Quarter, then it is 25% less that rthe full amount. The 3rd is 50% less and the 4th is 75% less.
the amount is 1200 the Quarters of the year = 4 The regristrant is 1
Then I submit this page with all the values in TeamScore for every employee and I want to perform a calculation based on the values in the drop-down and a weighted score from another database table. An example of a weighted score is 0.11 and I need to multiply the value(from 1 to 10) times the weighted score of 0.11 for each employee.
I have several records to update all at once from the previous screen of drop-down boxes containing numbers 1 - 10 and I want to take each individual drop-down value and multiply it by a weighted score (i.e. 0.11 etc.) Code:
I would like to calculate freight online for UPS and Fedex. However I have already calculate freight for ABF, Roadway and MyYellow, because they have provided sufficient documentation of Input/Output parameters. I try to find out Documentation on Fedex and UPS, but did not find any documentation or any sample code for this.
I hope some of the guys already did this excercise, can anyone tell regarding this?
FYI, I have created UPS account and FedEx and same Information I hv asked from them but did not get any reply for them also. Code:
If ad_expiration_date (date() + 90) then ad_expiration_date = (date() + 90) else end if
What I want to happen is if the ad_expiration_date entered by the user is beyond 90 days from today's date, the Expiration Date should be today's date plus 90 days. If the entered date is less than 90 days from today's date, leave it as entered. The code isn't working correctly, all dates entered are getting converted to today's date plus 90 days.
I have created the following code to create the recordset rsToBeApprovedLocalItemID. Unfortunately, the for next loop works properly only on the first cycle. The response.write(arrToBeApprovedCatSub(0)&arrToBeApprovedCatSub(1)&"<br>")works for each loop but the SQL statement sqlToBeApprovedLocalItemID returns a populated recordset only on the first loop.
On subsequent loops it is empty even though the arrToBeApprovedCatSub(0) and arrToBeApprovedCatSub(1) are alive and well. What's going on? This is truly weird behaviour. I have not come across something this funky before. Code:
I have this form where in i calculate the number of months between 2 dates.It calculates only if both the textboxes have values. And then i display this in another text box. The user has to enter the date in DD/MM/YYYY format. user can select date from calender popup. Apart from selecting the user can also type in the date. I am using a function which splits the date entered by the user into DD MM YYYY and then compares each of these values to see if its in the valid range like day is between 1-31, month between 1-12 etc. But i m having a problem. If the user enters characters instead of digits, my system accepts it in the first box without giving error and then when the user selects a proper date in 2 textbox its gives an error: 1 is null or not an object. this error comes at the place where mt function splits the entire date string into DD MM YYYY. Could someone please give ne a solution, a way to format the date so that i let the user enter first 2 digits and then a "/" and then 2 digits and then a "/" and then 4 digits only.
I am using a Relational database for my site and i have the following tables:
FIXTURES, GAMEDATES
the fields in FIXTURES are:
GameDate Home Away
(All of the above are numerical fields)
the fields in GAMEDATES are:
DateID(integer) GameDate(#Date Field#)
What i have done is in the GAMEDATE field in the FIXTURES table i have used the ID number of the date that i wish to assign to that record - using a LEFT JOIN to display the actual date that is pulled from the GAMEDATES table (That which corresponds to the relevant id used in Fixtures)
The problem is that in some of my code i want to display records using sql and sometimes in the where clause i use the following:
WHERE Fixtures.GameDate<=(Date())
obviously meaning WHERE GAMEDATE is LESS THAN or EQUAL to TODAY.
The thing is when i use the join it does not use the where clause and displays all of the records in the FIXTURES table.
Does any one know how to get around this, i have not received any error messages it just isnt displaying the right data
Why is it that whenever I press "search" it's saying:
SELECT * FROM bible WHERE verse_spoke LIKE '%jehovah%'%' AND ( spokes = '004') AND ( recordType = 'gn' OR recordType = 'is' OR recordType = 'ro') Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] Syntax error in query expression 'verse_spoke LIKE '%jehovah%'%' AND ( spokes = '004') AND ( recordType = 'gn' OR recordType = 'is' OR recordType = 'ro')'.
I would like to display the difference between the logging time [Session("start"] and the current time [now]. In hours minutes and seconds, I have tried a couple of things but all I see is gobbledy gook.
I am developing a simple ASP-Access system for invoicing purpose, and the system is in 98% progress. What I want to do now is to add some sort of "control stock levels".
Let say I have set the quantity of an item/product (eg, pencil=100) in my database (in my database it refer to the table tblProducts with the field called PStockLevel) When one customer want to buy 10 pencil, the system will automatically set the PStockLevel to 90. All the calculation will be done in the page called tasks.asp.
Error Type: Microsoft OLE DB Provider for ODBC Drivers (0x80040E14) [Microsoft][ODBC Microsoft Access Driver] Syntax error in FROM clause. ----------------------------------------------------------------------------------
Yes, I know this question has been answered a million times, however, I've already searched through this forum and my problem still hasn't been resolved.
Basically, I keep getting the error above whenever I try to execute this code. This code is from a search page entitled search.asp.
i want to calculate the total time between to dates and time.
Example: Total time elapsed from date 1 time 1 to date 2 time 2.
27/09/2004 11:00 - 28/09/2004 10:30
The user enters a record and then later comes back and closes it. I need to know the time it took from when they entered the record until the time it was closed.
I'm developing an ASP app where a user can choose from several categories (selecting multiple), and display results of records that contain these categories. Each Record has the fields Category1, Category2, Category3, Category4. I created a script to parse the selected categories, and include them with an "IN" clause in the SQL query (using ACESS 2000 database). Here is an example:
Select * From [Members] where (category1 IN ('Photography/Video',' E-Learning',' PR/Marketing/Media Relations')) or (category2 IN ('Photography/Video',' E-Learning',' PR/Marketing/Media Relations')) or (category3 IN ('Photography/Video',' E-Learning',' PR/Marketing/Media Relations')) or (category4 IN ('Photography/Video',' E-Learning',' PR/Marketing/Media Relations'));
when I select more than 1 Category, not all records appear. For instance, in the above statement, all records with "E-Learning" as one of the categories do not appear in the recordset. Perhaps there is a better way of writing the SQL statement that I am not aware of.