Will CDOSYS Handle Sending To 2000 Recipients?

I have a database of 2000 subscribers. I need to send an HTML email to the entire list, but the mail needs to be individual to each recipient, so I need to loop through a script integrating database results into the mail-out.

My host doesn't have any ASP email components installed on the server other than CDOSYS.

Will CDOSYS be able to handle this, or will it flake/timeout? I need to be sure that when my colleague presses 'the button' it works (I'll be on holiday at the time!)

View Replies


ADVERTISEMENT

Sending Email Using CDOSYS

I used the below code to try and send an e-mail. On my local machine (XP machine) using IIS, the e-mail got generated and was placed in this folder.

C:InetpubmailrootQueue

So I am assuming the mail got generated correctly and the reason the e-mail did not get sent is that I do not have SMTP setup in my IIS. Do you agree with this statement? The reason I asked that is because I am not sure if I have SMTP setup or not in IIS and I am not sure how I check that.

To continue, I migrated my code up to the production web server and I tried executing it there. I have some display.write statements and they all were displayed so again, I am assuming the mail got generated correctly.

The problem is that the e-mail was not sent (or at least I am assuming it did not because I do not see the e-mail in my inbox).

I have never generated an e-mail before so this process is new to me. My code will be attached below but I was trying to understand some basic concepts.

-If I get my code to work on my local machine thru IIS, should it then also work in the production environment?

-It seems like I am calling so pretty specific components for the configuration settings. Is this the correct way to handle this?

-If you are familiar with this type of code, have I implemented this correctly? I would assume I have not since an e-mail is not getting set.....

View Replies View Related

CDOSYS - Not Sending Mail?

I am usually a CDONTS man but the hosting company say I must use CDOSYS. The following code seems to only work correctly when the recipients email address is the same as the sender address.

I have tried to send the email to Hotmail, Yahoo and GMail accounts and it does not send. No error messages, just is not received in the inbox of the account.....

View Replies View Related

Sending Emails With CDOSYS

I need to be able to send emails from my webserver using ASP and I am using CDOSYS to do this. I have set up my Global.asa file as follows: Code:

View Replies View Related

Sending Email Using CDOSYS

I want to send auto email using CDOSYS but in backdate. is it possible to set the date for an email? Code:

View Replies View Related

ASP Sending E-mail With CDOSYS

im using code below to send an email, let say sample is my company domain, when i try to put myMail.From and myMail.To as Lee@sample.com.sg, but when i try to put myMail.From and myMail.To as same as code below, it seems like never send ou the mail. Can anyone tell me what is the problem? Code:

View Replies View Related

Queue Email Sending With CDOSYS

I'm running a mailing list which has grown to around 5000 recipients. I'm currently using ASP to cycle through a database of recipients to send each a custom email with their name, unsubscribe link etc.

Currently I'm using CDOSYS to send the mail, and have set up a page to trigger the emails in batches of 50 so that they don't create blockages on the mail server.

Is it possible to queue emails with CDOSYS, since this would mean I could fire all the emails at once, safe in the knowledge that they will all be dealt with without a problem.

I've used the ASPEmail component before which does this, and it was very effective, but sadly it's not an option to use it on this domain.

View Replies View Related

Sending Email Iis5.1(xp) Cdosys

I am trying to send myself an email using cdosys. The error i get is:

CDO.Message.1 (0x80040222)

The pickup directory path is required and was not specified. my code looks like this: Code:

View Replies View Related

Sending Htm Mail With Cdosys To Hotmail

When I send htm mail to hotmail using cdosys the links appear like this " javascriptl("news01.htm"); " without quotes, the images appears in the worng place and they shows as attached, but when I send the same mail to Outlook there is no problem, the links and images apeears in the right place, there is no problem with it jus in hotmail or free web based application mail. (yahoo, gmail, hotmail, etc...)

Somebody Knows why??

View Replies View Related

Contact Form Sending Through Email Using Cdosys

I am new to asp i am facing in sending the contact form sending through email using cdosys the following is the code server space work on Microsoft Windows 2003 w/IIS 6.0.

When i press send button i get a error as The page cannot be displayed and HTTP 500 - Internal server error .....

View Replies View Related

Access 2000 Or SQL Server 2000

I am planning to design a database (destined for the web) that will have
between 20000 and 45000 records in it and will receive a lot of reads but
very very few writes (just from me).

Now the question is should I use:

1) The combination of Access 2000 (accessible through ASP or ASP.NET) using
OLEDB Jet

or

2) SQL Server 2000 ?

Of course I know that the SQL Server option is a better one, especially
since it's said that an Access DB can have about 9 users or so accessing it
at the same time. But is that a general rule or is it about many people
writing to the DB? In other words, if an Access DB has hardly any writes
and 99.9% reads can it be used as efficiently as it would be used on SQL
Server 2000?

View Replies View Related

Error In COM+ While Migrating From 2000 Server To 2000 Advace Server

I have one 3 tier architecture application running on Windows 2000 Server.

I have created replica of same machine on another machine where OS is
Windows 2000 Advance Server.

But when I port same running application on new machine i.e. Machine with OS
as Windows 2000 Advance Server, my middle tier (Active-X Dll, COM+
application) fails.

It throws common error
Invalid Procedure Call or argument

What could be the problem? Do I need to change any settings for running
application on Windows 2000 advance Server.

View Replies View Related

Multiple Recipients

I have a form that I want to email three people from - dependant upon three fields in a form.At the mo, I can only email 1 person.it doesn't work

Set iMsg.Configuration = iConf
iMsg.To = Request.form.Item("Room") & Request.form.Item("student") & Request.form.Item("teacher")

View Replies View Related

Jmail - Add Recipients Name?

I have a Jmail form with several texfields incl. email and name of users. The mail is sent from me "John Doe" "email@domain.com" to the user filling out the form. When the e-mail is being sent it looks like this: Code:

View Replies View Related

Multiple Recipients : ASPMailer

I'm sending email using ASPMailer thru ASP to single recipient, it is working fine. But if i m sending to multiple recipients its not working, email is going but not in proper format. i am sending some HTML format email. the email received by recipient if getting junk not in proper format.

View Replies View Related

Multiple Recipients Mail

I have few textboxes on my first page that ask for user's e mail address and other five additional e mail address after submiting that form it sends a copy to all the people use e mail address is entered.

I can send e mail to only one person if i put following code

objCDOMail.Cc = "viral007@gmail.com

or

objCDOMail.Cc = Emailtxtfield

but how can i send e mail to all the people on the list

it works if i put this
objCDOMail.Cc = "viral007@gmail.com; viralbhatt@hotmail.com"

but i have to get the value from txtbox

so if i put this code

objCDOMail.Cc = Emailtxtfield; Emailtxtfield2

it doesn't work.

View Replies View Related

Undisclosed Recipients Message

I'm using CDO Message to send out a newsletter, but I want to keep the recipient list hidden from view in the email TO: field and just show <undisclosed recipients>

How can I accmplish this? Code:

View Replies View Related

Cdo - Send To Multiple Recipients

I'm using cdo to send auto-generated emails. I'm calling a stored procedure that returns a recordset.

In most instances, the recordset will only return one record containing one email as the value. However, there are instances, where two records can be returned with two seperate email addresses that I need to send out using cdo. This is how I'm calling the procedure:

Code:

View Replies View Related

Send To Multiple Recipients

I am using CDONTS to send a confirmation email. I am using plain text to send my email. I would like to send to multiple users, but I am already using the "To," "Cc," and "Bcc." Is it possible to send to multiple recipients in the "To" field? I am also using variables instead of hard coded email addresses. Here is my code:

Set MyCDONTSMail = CreateObject("CDONTS.NewMail")
MyCDONTSMail.From= TeacherEmail
MyCDONTSMail.To= Administrator, Administrator2, Administrator3
MyCDONTSMail.Cc= Secretary
MyCDONTSMail.Bcc= TeacherEmail

View Replies View Related

Multiple Recipients Using CDONTS

somebody can whats wrong with my script, i would to add some additional recipients on the cc field, what would i do? Code:

View Replies View Related

How Can I Send The Mail To Multiple Recipients

how can i send the mail (CDONT) to multiple recepients in ASP

if i select the address from the address box ,then all the selected mail id will go to TO text box with ' seperator.

View Replies View Related

ASPEmail To Send To Multiple Recipients?

ASPEmail to send to multiple recipients? I tried to use comma and semicolon but all the time give this message error:

Error: 6 - 501 Bad address syntax

nor : email@dom,email@dom,email@dom
or: email@dom;email@dom;email@dom

what is the sintaxe for it? can I only send for one recipient by time?

View Replies View Related

Contact Form Varying Recipients

I have a standard formmail contact form that I would like to customize the recipient on. In other words, I want to be able to specify the recipient in a string in some cases, but when it is not specified have it send to a default recipient. What's the easiest way do accomplish this?

View Replies View Related

Email Multiple Recipients From Recordset (jmail)

I'm trying to send an email (jmail) to everyone in a recordset but I'm getting no joy,I keep getting a "not all servers received message" error or something similar, can someone please take a look at this code and see if they can spot my glaring errors ?

<%
set rsetReminder = Server.CreateObject("ADODB.Recordset")
rsetReminder.ActiveConnection = MM_connmessages2_STRING
rsetReminder.Source = "SELECT * FROM accessgroups WHERE ((accessgroups.fldjoined<Date()-14)) AND fldGroup = 'Guest' ORDER BY fldjoined DESC"
rsetReminder.CursorType = 0
rsetReminder.CursorLocation = 2
rsetReminder.LockType = 3
rsetReminder.Open()
rsetReminder_numRows = 0
%>
<%
While NOT rsetReminder.EOF
firstname = rsetReminder.Fields.Item("fldFirstname").Value
lastname = rsetReminder.Fields.Item("fldLastname").Value
emailadd = rsetReminder.Fields.Item("fldEmailAddress").Value
username = rsetReminder.Fields.Item("fldusername").Value
password = rsetReminder.Fields.Item("fldPassword").Value
usrid = rsetReminder.Fields.Item("fldnewuserid").Value

crlf=chr(13)+chr(10) .....

View Replies View Related

Email Multiple Recipients With CDO Mail Component

I'm a PHP programmer who for some reason was tasked with fixing some code on an asp page. I have what I feel should work, but I am getting this error:

CDO.Message.1 error '8004020c'

At least one recipient is required, but none were found.

/admin/mass_email_monthly.asp, line 47

Line 47 being this line: objMessage.Send

Now I want to have multiple recipients pulled from the database as illustrated in the code, but it isn't working. I have no idea why, and I have no idea what that error message means? Can anyone point me in the proper direction of a tutorial that can help? OR possibly show me where my syntax is wrong?

View Replies View Related

How Can I Use SMTP And ASP To Send Mail To Several Recipients On A Single Occasion?

I use CDOsys and this code to specify the recipient. I guess I could create two separate instances of the objMail and specify everything one more time, but I want to send mails to two persons at once (the recipient and myself) and therefore wonder if there is a shorter way to do it.

View Replies View Related

Handle Printing

I am trying to create a popup page to print little cards to Avery labels. I can get the page to work out but it always prints the margins to far over so it doesn't fit in the cells. I was wondering if any one new any resources to give details on how to accomplish this or of another method?I have also tried creating a dynamic word doc but then the user could change the text values which wouldn't work.

View Replies View Related

Error Handle SSI

I have a page with multiple SSI to content that is managed by other people in the organization. However, occassionally, one of the content managers accidently deletes a file or messes it up, which throws an .ASP error for the whole page. This is not good. I need to display the page, even if some of the include links are broken.
I tried using:
Code:

<%
On Error resume Next
%>

View Replies View Related

Handle On Username

I need to let one person view certain things without having this perons
login. This person is logged in to the microsoft network. How do I get
that info into a variable?

View Replies View Related

Handle A Recordset.

if i have a recordset which contains a variable call remarks(which can be of any value)
how to i store this in an array? wat is the synatx?

array=rs1.Fields("REMARKS").value ???????

the need it cos i need to count the specific number of character inside this REMARKS. meaning say i output char 1 to 100 at box 1... and char 101 to 200 at box 2.

View Replies View Related

Access Db Handle

i'm about to built a budget DB driven site for someone. access is the cheapest option for me, as my host charges for mysql, plus i aint used it before! [:I]

they anticipate around 250 visitors per day. would access on a dsn-less jet connection hold up? how many consecutive users would it handle before it fell over.. ?

View Replies View Related

Handle Null Value

I've tried inserting this code, but it doen't work. I guess it must be something to do with the byVal keyword used in the constructor for the function?

Code:
'Handle a Null date
If (strDate = "" ) Or (Len(strDate) < 1) Or (strDate = Null) Then

fncFmtDate = "N/A"

Exit Function

End If

View Replies View Related

Handle Procurement

I created a web site for a local government office to handle their procurement. When the city modifies a solicitation, all of the respondants need to be notified. Unfortunately, the city wants the email sent to each respondant to be individualized, so I can't just CC or BCC it to several hundred email addresses.

After about 200 emails, the server usually times out. The city is hosting with Verio and Verio won't change the timeout values since it's "virtually hosted". Is there a way to spawn a background task to send the emails? If not, what's the best method for batch send?

View Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved