I currently use this for my error handling in XML HTTP... Code:
On Error Resume Next
If NOT xmlHttp.readyState = 4 then:xmlHttp.waitForResponse = 5:End if
If err.number then
response.redirect("error.asp?error=2&pg=" & Current_page_URL)
else
If xmlHttp.Status <> 200 OR NOT xmlHttp.readyState = 4 then
response.redirect("error.asp?error=2&pg=" & Current_page_URL)
Else
'content here (no error)
end if
But when the site I am gathering data from is down, then I get an error saying that It cannot connect to the server. How can I error handle this error?
I have a dynamic asp page that takes input from a url. IE: parts.asp?sku=543 From there it looks up the sku in a database and outputs the part information. Currently if you put in an invalid sku that is not in my database, you just get a Internal server error.
Whats the correct way to give a 404? Do I just do a Response.Redirect to my 404.asp page if the recordset is empty?
How do i do error handling using asp. Like taking an example i am getting this error on trying to save a record twice whihc has a primary key constraint:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E14) [Microsoft][ODBC Microsoft Access Driver] The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again.
how can i handle such cases and where do i place the code???
I want to error handling in ASP. But i think that ASP is not enough for error handling. I have got two chance. 1. I can prapare an error page and control throught IIS. 2. I can use on error resume next. For 1. This is a general handling. I want to handle local error. Maybe i do special thing when error occured. For 2. I have to write alot of lines code. I have to control every line.
Is there a possiblity that, when an error comes in asp page in server, especially with sql script, to hide that error from user and display just Error, report to admin,
i just want to make a general case where when an error comes i should take the page to report to admin.
how i can handle errors on ASP page. Actually i want to maintain a ErrorLog in Database and want to redirect the user on an Error.asp page where i can show him the error details(i-e error #,Description etc).
I have found "With Endwith" method to handle errors but the problem is that i can only write it with a record set and it will handle only record set related errors and also i have to write With EndWith with each recordSet but i want to handle any error on page at a single place.
I have a script that takes gathered customer data, sends it to the gateway (ecommerce site), then takes the response from the gateway and redirects or prints out any errors (invalid CC number, declined etc.). Code:
I am am using WDDX.Deserializer.1 to parse some XML data to display on an ASP page. Occasionally, I get an error like this:
Microsoft VBScript runtime error '800a01fb' An exception occurred: 'deserialize' /includes/sidebar.asp, line 25
Line 25 is:
set MyRs = MyDeser.deserialize(content)
I would like to set up some error handling so that if this error occurs it will display a custom error message rather than this one. Right now this message occurs near the top of each page on the site, in effect crashing the whole site. How can I test this to see if an error will occur?
I inserted an error handling code for the code bellow. What happen is the page is taking a long time to load. Upon loading it takes me to "page not found" of microsoft internet explorer. How do I solve the problem? Code:
When a user tries to visit a non-existant page in our web site they receive a custom 404 error message. I want to capture the URL the user tried to visit. Does anyone know where I can find this string?
I have an error handling routine that emails me the Err.Source, Err.Nbr, and Err.Description in the event of an error. How can I include the line number of the error as well and the filename?
Is there an elegant way to check for the REFERENTIAL INTEGRITY VIOLATION in Access via ASP. The reason I ask is that if the user attempts to refresh the screen after implementing an INSERT he will be trying to insert an identical record which thows up the following error (below).
I could place On error resume next before but I find this dangerous or am I overworrying. I could preface the insert by doing a check for the record but this creates longer code which warps my anti-debugging frame of mind :) - is there a better way? Code:
i am coding in VBScript. i am coding for an online survey. Fr error handling (eg if the user forgets to fill out a field), is it possible to ensure all fields have been filled out BEFORE clicking the submit button? i wish for the user to be notified via a MESSAGE BOX, how would i go about this(using VBScript)?
when I try to insert a duplicate record I get the primary key error. which is good. but I want to generate a user friendly error ... telling the user that u have got this error because u r trying to insert a duplicate record. i can simply do so by using "on error resume next"....
this is what I do:
"on error resume next server.transfer("error.asp")"
the problem is it simply takes me to a page where I display an error has occurred... it doesn't look attractive to display a one line error in a big page? I hope I am clear....
1. how can I display the error message in my error.asp
2. I can I make it look better... how is error handling done ???
Subscript out of range: '[number: 0]' or Subscript out of range: '[number: 1]' or Subscript out of range: '[number: 2]'
This is correct in that the variable is empty if user does not fill in correctly. However how do i stop it falling over and just get it to error handle?
e.g. If Subscript out of range: '[number: 2]' empty how do I 'know' this without an error? Code:
If I try and add a record with a duplicate primary key I get the following error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC Microsoft Access Driver] The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again. Code:
Invalid ProgID. For additional information specific to this message please visit the Microsoft Online Support site located at: http://www.microsoft.com/contentredirect.asp. /CoxAxis/adminEditPage.asp, line 6
My code:
<% dim self, pid, i, c self = Request.ServerVariables("URL") pid = Request.Querystring("pid") set Session("pageContent") = Server.CreateObject("Scripting.Dictionary") Set custObj = Server.CreateObject("NFIFunctions.ValidateField") Line 6 set psi = Session("pageContent") set errDict = Server.CreateObject("Scripting.Dictionary") i = 1
I tried to display an error detail on my webpage when I got an "HTTP 500 Internal Server Error" of my .asp page, but I was failed I did setup in IIS so it will display debug error on my asp page as well as setting up my browser internet option.
Can you help me how to set it up so I am able to see the error detail on my browser when I get "HTTP 500 Internal Server Error" ( Currently, I just got a blank page with "HTTP 500 Internal Server Error" in the web page title)I run IIS 5.0 and window professional xp browser.
well i m developing application in asp when i want to access these pages from ie5 it shows error HTTP Error 403 - Forbidden in internet explorer http://localhost/Mail/email.htm .
I am having trouble, with Error Handling.. I have a ICMP ping utility in VBScript, it works fine if there is a proper reply but will create an error if the IP or DNS name is unknown, Can someone look through the code and see if theres a way I can catch the Error and display say "REQUEST TIMED OUT" Code:
i'm trying to incorporate error handling into my application, but i've run into a dilemma.
i've already performed 10 successful INSERTS, but on the 11th INSERT, the application fails for some reason (say for example, i tried to perform an INSERT into a table that doesn't exist). logically, i should stop execution and display some sort of error message. but, i've already ran a bunch of INSERTS so what do i do?
I am calling some stored procedures from ASP. These strored procedures have to deal with lots of deletes and updates. So i have thought of implementing transaction commits and rollbacks. But if a rollback occurs in these stored procedures, i want to get a value back to asp page, based on this value i will run the next stored procedure.
I want to capture err.description into asp variable when any error occurs in the pages as a whole. Suppose some error occurs at the top of the page say ADO Block.
Can it will travel till page end, or can every error necessarily stop the proceedings and throw error resulting page crash. My ultimate aim is to capture error in asp variable when ever crashable error occurs. How to capture it. Code:
i'm trying to incorporate some error handling into my web app, but i'm not sure how to go about it in this case.
say for example, i already ran 10 INSERTS, then on my 11th INSERT, something fails (perhaps trying to perform an INSERT into a table that doesn't exist). logically, i should stop execution of the page and display some sort of error message. but, since i've already run 10 successful INSERT queries before the error occurred, what do i do now?
I thought this is more of an IE issue but i've had no joy on that group perhaps somebody here will have a clue.
If i click a link to a web page embedded in Excel (97 OR 2000) i get the standard error page displayed by IE (you know, the 'cannot find server or dns error' page).
Turning off 'show friendly http error messages' alleviates this. (Unfortunately this is the Windows default setting!)
Error Type: ADODB.Field (0x800A0BCD) Either BOF or EOF is True, or the current record has been deleted. Requested operation requires a current record. How to do the error hanndling, if certain record cannot be found in the database? If possible, please show the coding.
I've already unchecked the "show friendly http errors" advanced option and it work fine in one page only. The problem is when the page is in a iframe and that iframe is in a table. Got that massage.
On the other way I've another site with iframes and tables.....and this doesn't happened. Have a 50 k paint picture attatched.
