I have a big problem with the SMTP service in IIS on Windows Server 2003.
I tried to install FTP service on windows Server 2003 but had to cancel it as it did not appear to be working. Since then, i went back into IIS Manager and all services were stopped. I have got the default web site services started OK, but the SMTP service is stopped, and right clicking and selecting start does not start it running again. I just get a dialog box saying that the service isn't running and to start it running again (!!!!! That's what i was trying to do!!!!!!!!)
i also tried to restart it from DOS and got a message saying that the service was already running!!
i have also tried to stop the service from DOS and get a message saing that 'The Service could not be controlled in it's present state'!!!
How do you change the port in which CDONTS will look for Microsoft SMTP server? I have Imail running on port 25, and I have SMTP service running on port 26. Any help you can provide me would be excellent.
I am running Win XP and have installed the IIS SMTP service, however I'm not sure what I need to do to configure both the SMTP service and CDOSYS properly to allow me to send out email from an ASP script.
THE PROBLEM:
What is happening is the email is not sent and goes to the 'c:InetpubmailrootQueue' folder. I have checked the event viewer and the error I receive is:
Message delivery to the remote domain 'yahoo.com' failed for the following reason: The remote server did not respond to a connection attempt.
I believe the SMTP service isn't setup correctly or I haven't configured CDOSYS properly in my ASP script.
The CDOSYS part of my ASP script is setup as follows (I am using Javascript as the ASP language btw): .....
I am running Win XP and have installed the IIS SMTP service, however I'm not sure what I need to do to configure both the SMTP service and CDOSYS properly to allow me to send out email from an ASP script.
THE PROBLEM:
What is happening is the email is not sent and goes to the 'c:InetpubmailrootQueue' folder. I have checked the event viewer and the error I receive is:
Message delivery to the remote domain 'yahoo.com' failed for the following reason: The remote server did not respond to a connection attempt.
I believe the SMTP service isn't setup correctly or I haven't configured CDOSYS properly in my ASP script.
The CDOSYS part of my ASP script is setup as follows (I am using Javascript with ASP btw):
I am working on a listing for sending emails via CDONTS component...
I have installed SMTP service on my machine and tried running the sample code....No errors appear, yet no mail is sent in the long run...All necessary services are up and running (IIS Admin, WWW and SMTP).
Another thing is that i have checked to see if Default SMTP Virtual Server is listed under the Internet Services Manager pane tree, but nothing seems to be there except Default FTP Site and Default Web Site....
The question might seem silly but...do i have to have a Mail Server installed.....?
How can i determine the cause that prevents the mail from being sent...Logs don't help much....Is there a way to detect the actual presence of the component...?
Is it possible restart IIS from ASP? I tryed activex dll, but it wont work, i think its an "user rights" problem When i use this dll form vb6 all works fine. Any other solution?
Sometimes i need to restart the IIS on a current server, but the problems is that if i want to, then i have to contact them by either email or phone, but sometimes it takes few hour to do it. So i wonder if there Is a way to restart your IIS Programmitcally?
is it possible to restart apache from asp? the asp, of course, is running on the apache. it seems impossible to me, but.....of course, that is exactly what i am supposed to do. my asp script edits the config files, and i want the changes to take place immediately after i edit the files.
When IIS is restarted session_onEnd is called. though the debugger is not available at this point in Session_onEnd, is there any way that the code in session_onEnd is running due to iis restart and not from the timeout.
I am using classic ASP. When the session times out theglobal.asa event called session_on end is invoked which is absolutely correct. When I explicitely do IIS reset or iis restart then again session_on end is invoked. How can I distguish in global.asa event session_on end that this is natural session time out or explicit IIS restart....
Recently changes were made to my pc. So I am now using another profile (which is a copy of the old profile), in order to enter a different domain when signing in to windows xp.
Since those changes, when I am trying to view asp pages through localhost, I am getting a 500 error, saying the page can not be displayed.
After shutting down and restarting, it works again (maybe a shutdown is not necessary, but only a reatsrt. I haven't tried).
When it was not working, I have checked the IIS and the directory "WEB SITES" state was "Running".
I do not remember anything regarding IIS, as I installed it a long time ago and once it worked, I did not have to do anything more. I do not want to reinstall, as I do not remember how, and it will take me a lor of time now.
using win 2000, asp and mysql. when i perform a bad sql statement in asp like...
dim cn set cn = server.CreateObject("adodb.connection") cn.Open "DRIVER={MySQL ODBC 3.51 Driver};SERVER=localhost;DATABASE=homerton;UID=root;PWD=;OPTION=35" dim rs set rs = server.CreateObject("adodb.recordset") sql = "selec * from tablename" 'note the typo on select rs.Open sql,cn
IIS complains with Microsoft VBScript runtime (0x800A01FB) An exception occurred: 'Open'
If i correct the error IIS still fails to work until i restart the w3svc service. On another pc running the same setup this doesn't happen, and correcting the typo enables the asp to work again.
IIS isn't crashing, it would still run a simple asp page with response.write etc on my pc, it's just when it comes to an sql statement again.
Anyone know why this occurs and if there's a solution?
Our network administrator does not want to install the IIS SMTP server on our intranet. He wants me to use our existing SMTP server "mail.smpi.siemens.ca". Can I do this with IIS?? Is this a setting in an ASP if I'm not running the IIS SMTP server?
I'm having a few problems with getting an SMTP server configured on my Windows 2000 Server web server. My web server is co-located at my hosts and i use VNC to remotely access the web server. Acting on advice from my host IIS's SMTP server has been disabled by running the IIS lockdown Tool. I have internal access to my hosts SMTP server where i can send mail from my web site to my own domain email address only, i am not allowed to send email external address.
Does anyone know of a SMTP server that i can use to send emails from my ASP website?
My host suggested Jmail for doing the job. I installed JMail on my web server but i am getting the following error:
"The message was undeliverable. All servers failed to receive the message"
Can anyone tell me what this error is? Can anyone tell me how to fix this problem? I am correct in my understanding that JMail has its own SMTP server? How can i test to see if JMail is working? after installing JMail do i include my web server IP address as the SMTP server?
I want to send email using asp I' have tested with asp(CDONTS ),but it doesn't work. For example i send it tosomeone@somedomain,but it doesn't work.Should i make a configuration?The problem is i only can accept emails, but i cannot send any.
My web app were sending emails and then emails were not being sent because the SMTP was down. Are there certain steps that need to be followed/implemented at the web-server before an web app can send emails to the end-users into their client email? Please recommend where I can look into the IIS web-server if there is any place where permissions are set to allow the IIS to communicate with the SMTP mail server?
I'm trying to send and alert email via ASP page and it's getting stuck in c:InetpubmailrootQueue. Everything else is fine and I get no errors, this page redirects to the right place and everything. The mail just gets stuck in the queue. Go figure!
Here's the script I'm using or do you think my SMTP isn't set up right and if so where can I get some help on setting up the SMTP? Code:
i have an asp front end app on a win2k server and want it so that when form data is submitted and entered into the database, an email is generated concurrently with the details sent to an email address.
do is this done from asp (any examples) or can it be done with smtp ?
I have an ASP page that sends email using CDOSYS. If there is any type of failure that causes the email not to be sent, I don't have any way of knowing it. Is there any email component that will notify me or log the failure?
I have a website and I need visitorst to be able to send emails to me from it by filling out a form (not mailto:).
I have Win2k3 server enterprise running with IIS and POP3 all setup. My provider blocks port 80 so i redirect using no-ip.com to another port. I tryed CDOSYS and other free third party mailers (currently I have Persits Software free ASPemail installed), but I can't get anything to work. I know by now that I need to set something up (maybe some redirect) on my server so this works.
Please, if anyone knows how to do it, tell me how. In particular, to send an email from my site to at least my local server, and at best to lets say hotmail.com.
I'm having problems getting CDO.Message to work with SMTP on my Windows 2000 Server. I keep getting the following error:
CDO.Message.1 error '80040213'
The transport failed to connect to the server.
/services/E-CommerceQuote_new.asp, line 2357
I am assuming that it is meaning it can't find the server i have specified where the SMTP server is, which is the same PC. I have specified by IP and domain name but i get same error. i know i haven't said much about the setup im using so if needed i can provided more details.
I have an ASP page that uses CDOSYS to send a simple HTML format email with a PDF attachment. When I open the PDF attached to the email it shows up as a blank page. I log into the web server console and open the same PDF in the source directory and it opens fine. I run a binary comparison of the source and attached files and there's a difference: one byte, x'2E' is missing at offset x'0231'. If I save the attached file and use a hex editor to insert the x'2E' the file opens just like the original
Iīm facing problems while trying to send e-mails by CDO.Message... The error happens when some of the recipients arenīt real (working) e-mails... The error code is 0x8004020F, and the code simply donīt work when some of the e-mail in the list isnīt real, not sending to the rest of the list either.
I'm trying to send emails through my SMTP on my IIS in windows 2000 server .... everything seems to be fine except I can not send anything to hotmail .... so basically hotmail is blocking my emails .... and I have had the same problem with different domains .......
and also yahoo sends my emails to BULK folder ... I'm using exchange server 2000 and Mdeamon and same problem on both .... but if somebody sends me an email from HOTMAIL and I reply the message then hotmail will accept it .....
I'm having problems getting the virtual SMTP server (in IIS) from sending an email message that was created from an ASP script. The messages are stored in the InetspbmailrootQueue directory but the computer isn't sending these messages to the Internet.
My server has POP but only has SMTP if sending to my domain, and not other domains (such as hotmail). I'm therefore wondering, if anyone knows of any scripts etc, that will allow me to have a sort of "virtual" SMTP server on my site?. (I really can't afford to use a third party SMTP mailer).
I have a client with their own W2k server and their IT guy refuses to turn on the SMTP service for fear of it becoming hijacked by spammers.
However, they also want their web site to perform some emailing functions I would normally use CDOSYS for.
I'm having them look into alternate SMTP servers to use with CDOSYS, but I was wondering if anyone here can recommend a 3rd-party ASP-based SMTP app that might be more secure than IIS' built-in service?
I'm trying to send mails from asp page.Its showing error.Permission denied.When I checked the IIS settings SMTP server showing unnknown. I cannot start the SMTP server. Wat shall ido to start the smtp server.
I get the permission denied error, so I know its a permissions problem on the mailroot folder.
My question is then, if my site is being hosted, would it matter what the permissions of the folder on my local computer are? Or would I have to call my host and ask him to make the appropriate permission changes?
And if you could tell me what exactly I need to ask/tell the host, if that is the case, so that I don't have to call a million times.
