We want the currently date display in the input box (asp code), if the user wants to change the date, they can pick a diff. date from "date picker calendar". It picks the date...and it works fine.
When I try to submit, it doesn't submit the Date that I picked. I view the source code, it seems like it doesn't change the New DATE that I picked from the calendar. How can make its value change?
I have virtual directory where I run test.asp page with only this code inside:
<%Response.Write now()%>
As a result, if I go into the IE and browse for the test.asp page, I get :
1/22/2004 14:18:04
If I copy this page on some other(existing) virtual directory, I get as a
result 22.1.2004 14:19:06
If I create a new virtual directory and I copy the page there, I get :
1/22/2004 14:18:04
Seems like that IIS takes english date format even if my regional setting is
:
d.M.yyyy and I would like that date on the page is always like this:
22.1.2004 14:19:06
Where I can change this setting?
dates are formatted according to the system date format. However, I have found that a couple of computers consistantly display dates in American format. I have had the techos check all possible areas for setting of dates and I am assured that the proper setting have been made.
Is there a asp command somewhere, I can use that will set all dates displayed as dd/mm/yyyy. I have got around this problem by using Day(),Month() and year() and formatting dates accordingly each time I need to display a date.
Within ASP, the date is given in a format like:
6/23/2004 (independantely of the regional settings of windows).
I would like to have e.g. 23/06/04.
Is this possible ?
I am trying to change a short date format in windows.regionalSettings, and all changes affect only client scripts but server side scripts not
regionalSettings = dd/mm/yyyy
asp code result
response.write(Date) '03/03/1983
regionalSettings = dd.mm.yyyy
asp code result
response.write(Date) '03/03/1983
I'm currently entering the date into my date field using the now()
function, which delivers this result: 2/2/2004 9:08:09 AM which is
fine for some cases.
However, when retreiving this result, sometimes I'd just like to pull
up the first part, such as the 2/2/2004 and cut out the rest. How do
I take this date output, and format it to show only what I want? I'm
writing all this in ASP.
I have written various scripts where the date is enter as mm/dd/yyyy. However, they wanted changed to dd/mm/yyyy. How can make these changes with less pain?
I am using an Access Database. Which means, I will probably have to program that field the same way. But the only option it provides is something like "29-Sep-05". I can tell the user to enter the field as mm/dd/yyyy. But how can I have it done with the code to be saved on the database.
This is one of my codes:
rs("approval_date") = Request.Form("approval_date")
i have a date stored in my db in this format: 2005-03-15 00:00:00.000
however, i want to display this date on my .asp page in this format: 03/05
is there a quick function to do this?
i am having the dd/mm/yyyy format in my computer. i have done coding in asp page according to it. but when i run the same asp pages in different machines it shows me undesired results. so how do i change different machines settings also to dd/mm/yyyy format.
View Replies View RelatedI have two textfields. One for date entered and one for date expires. If I type in todays date 23/10/07 and press tab on the keyboard, I want the next field to automatically show the date in 6 months. I have seen this done on other websites but have no idea how to achieve this.
View Replies View RelatedAnyone who can help me with a code to convert a date string to another format?
Today the format is like this: 2005-01-12T10:06:42.8130000
I want to change it to this format:12.01.2005 12:06:42 (mm.dd.yyy tt:mm:ss)
I can`t use any fancy server tools, just plain asp-code that I can implement in my existing files. The date is a text string - and should be convertet using a little codes as neccessary.
My asp pages that display data from databases have suddenly changed the date format they display from UK to US, i.e. 11/17/2001 for 17th Nov 2003. I have checked on the win2k sp3 server that they run on, and the date/time zone is GMT UK and also the regional settings are correct for the UK.
The server has been patched in the last couple of weeks, but I'm not sure which patches as various engineers have access to it. However, does anybody know why this should happen when all the date/time settings are correct for the UK format?
I need to update an oracle database however, i must have the format
22 FEB 2004
Unfortunately i use a date picker(javascript) which returns 22/02/2004.
(this happens in client side)
How do i change the format to "22 feb 2004" in the server before inserting into the database ?
I already have
strdate1 = Request.Form("date1")
how do i change this date format ?
I can use to rotate images based on the date. I have a number of logo images that I want to appear in the same location of my web page. However, I want to determine which one is "active/viewable" depending on the date. I'm somewhat of a noob although I know how to manipulate canned scripts to get them to work. Any scripts out there that do such a thing?
View Replies View Relatedthe date format in my database(ms access) used to be mm/dd/yyyy and i've changed to dd/mm/yyyy. Now the date appears fine in the db. however wen i retrieve the data and displays in on a form, it is back to it's default format(mm/dd/yyyy). is there anyway whereby i can change it?maybe something like FormatNumber(rs("FromDate")) or whatsoever?
View Replies View RelatedIn my db, I have a date field wich as the format yyyy-mm-dd but when I receive the value from the DB, I'd like to change it to dd-mm-yyyy... How can I do this?
View Replies View Relatedhow to either change the time zone or add three hours to the following?
View Replies View RelatedI have this is my code:
<%= linkRec("datein")%>
It displays the date like this: 12/14/2004
But I need it to display like: Dec 14, 2004 or something similar (not just numbers)
Is this possible?
This is regarding a change in the Short Date format under Hebrew Regional
Settings, that has caused huge problems in our ASP web application. The
change appears to have been introduced sometime before Windows 2000 Service
Pack 4 and has remained through to Windows XP. I am looking for a solution
that doesn't involve rewriting our application (much) and that allows all
our users to keep using Hebrew Regional Settings.
To summarize our problem - we have an ASP-based intranet web application
that is used in our Israel office. Before we installed Windows 2000 SP4 on
our web server and on the client machines in the office, the application ran
perfectly. Dates appeared on the pages and in input textboxes in the correct
dd/mm/yyyy format. Immediately after installing SP4, dates on the pages and
in input textboxes are formatted as yyyy/mm/dd. This is not just a visual
change, it has caused many functions in the application to break. Code:
How can I change a date such as 10/21/2006 to read October 21, 2006. When using the DATETIMEFORMAT function I get the day of the week as well which I don't want.
View Replies View RelatedI am developing a simple booking system where I had a booking date. The problem is I want to make sure that the user must book 3 days in advanced for certain room.
I have tried to use DateDiff but it seems doesn't work. Actually i just 1 to make sure that the user must book 3 days in advanced from the current date. I am wondering whether there is anything goes wrong in my datediff function. Code:
i'm new here and i'd like to ask if there's someone who knows how to compare date() function and date from database with date/time type inside select statement so i don't have to do if..then..else
View Replies View Relatedsql = "UPDATE Marknad SET" _
& " Typ ='" & Typ & "'" _
& ", Modell ='" & Modell & "'" _
& ", Arsmodell ='" & Arsmodell & "'" _
& ", Beskrivning ='" & Beskrivning & "'" _
& ", Stad ='" & Stad & "'" _
& ", Prisidé ='" & Priside & "'" _
& ", Fornamn ='" & Fornamn & "'" _
& ", Efternamn ='" & Efternamn & "'" _
& ", Telefon ='" & Telefon & "'" _
& ", Epost ='" & Epost & "'" _
& ", Datum ='" & Datum & "'" _
& " WHERE (((Marknad.Annonsnr)=" & Request.QueryString("id") & "))"
DatabaseConnection.Execute sql
---
Above does work as I want it to do BUT it inserts 1/8/2006 instead of 8/1/2006 as it should!
The best thing would be to exclude the date from updating at all, but when taking away the line:
& ", Datum ='" & Datum & "'" _
It gives an error... how do I solve this?
I forgot, you might want to see this:
Datum = date
In my page i have two combobox. one for year and one for week numbers.Now my prob is
1.when i select a year from combo box 1, second combox box will display the number of weeks in that year.eg if i select 2005 it display me list from 1 to 53 as there are 53 weeks in 2005.
2.when i select a weeknumber from combobox 2 and press submit button it ll display start date and end date of entered week.
I am trying to compare two dates. My problem is no matter what the value of mydate, it is still fall in the first IF statement condition (even if mydate is 10/10/2004). Any advise for this matter?
mydate = "6/6/"&year(date)
IF date() <= mydate THEN
response.write "first half of the year"
ELSE
response.write "second half of the year"
END IF
I am trying to construct an SQL statement that can grab all of the entries out of a table, where the Date field consists of today's date. The Date field is called 'DateTime' - and it is in a General Date format (DD/MM/YYYY HH:MM:SS). I obviusly want to use an SQL statement like this:
SELECT * FROM tblExample WHERE (DateTime = Date());
However, that wont work because Date() will only return a short date (DD/MM/YYYY).
I would like to modify this so that the first available date that can be selected is five BUSINESS days out. The script only shows Mon-Fri so if the date is Tue Jul 13, 2004, Tue Jul 20, 2004 needs to be displayed. Code:
View Replies View RelatedI am trying to compare a date in my database to the current date. MySQL statement is:
sqltemp5="select * from users where dateclosed <= '" & date & "'"
What I am trying to accomplish is exclude records where the dateclosed field is older than todays date. Such as if dateclosed = 6/30/2004 then today being 08/25/2004 that record should be excluded.
In a connection string, I have the following:
sql3 = "SELECT DISTINCT State FROM Property Where TypeID = '" & srch_cat & "'"
In the database, is a field called expiredDate I am trying to show only records whose expiredDates are greater than todays date, but I am messing up somewhere. The values in the fields are as this: 3/7/03 (or something like that...no time is added to it)
"SELECT id, title FROM Businesses WHERE Date_Added >= " &
Request.Form("Since_Date")
This SQL string returns all records from the table Businesses and does
not seem to be able to recognise Request.Form("Since_Date") as a valid
date. The Since_Date value is entered into a form field as
"01-Jan-2005" and appears to be treated as a date; when viewing the
SQL statement(with a response.write) it shows the date as 1/1/2005
even if it is entered into the form as 2005/1/1
I've also tried CDate(Request.Form("Since_Date")) with no luck,
although this was the treatment that worked when the SQL statement was
running in an .idc file.
Date_Added is a regular DateTime field in an Access 2000 database
Any suggestions please ?????
I'm trying to get all records from my SQL Server Database with
"DeadlineDate" = today (not today - 24 hours).
All records has a field called "DeadlineDate", and the date is stored in
this field like this: 13.08.2005 07:00:00
I dont care about the hours (Ex: 07:00:00), just the date (ex: 13.08.2005).
This is the SQL I have made, it gets all the record with the date = today -
24 hours... but that is not what I want.
sql = "select title from tblProject where (deadlineDate BETWEEN DATEADD(d, -
1, GETDATE()) AND GETDATE())"
How can I get just the records that has the date = today's date??
if it is possible to change the location of the dlls of an application, by default, the assemblies of an application is loaded in the bin folder in the applications folder, can i change some configurations to save these dlls in another location?i'm using asp v1.1 and .net studio 2003.
View Replies View Relatediam having problem ,relating to update a column in Access file in ASP
'Change' is column name , rs is recordset object ,and i want to update the values in 'Change' column by return values from a function .Iam using vb script in asp
rs ("Change").value = function()
this is generating error, and won't work