I never really use cookies but I need to make sure that browsers have cookies enabled for cookies and ASP session variables. There are not javascript cookies only. I'm using the following code but it's just not working out. Even if cookies are cleared and off in my browser, it still registers that the cookie I attempt to set is successful. With cookies disabled I expect that no cookies should be set. It seems like it might even be set just for the life of the Sub but I can't really tell.
Anyone have a good way to do this or know how to modify mine?
Code:
Sub checkCookiesOn
Response.Cookies("ASPLPCookieCheck") = "True"
If Request.Cookies("ASPLPCookieCheck") <> "True" Then
Response.Redirect("/error.asp?error=cookies")
Else
'Request.Cookies.Remove("ASPLPCookieCheck")
Response.Cookies("ASPLPCookieCheck").Expires= #September 12,2000#
End If
It is possible to check via ASP whether cookies are enabled for a person's web browser and based on this check send him to another page which does not support cookies (ie login?)?
I searched around everywhere on the net, but could not find a simple example of detecting if cookies are enabled - on server side, and without moving from one page to another.
This should be a very basic functionality, so I am reluctant to believe that there's no way to simply test it in a server-side script.
I would like to kinda have things happen if javascript is enabled in the browser, or if it isn't then do some other things. For example, if I know javascript is enabled, I could bring a popup window, etc. but if it isn't, then I could just provide a link instead.
I am writing an application in ASP which needs to decide at server side while the ASP code is executing whether the cookie is enabled/disabled at the client browser or not.
I do got the code which runs accurately when the IP Address is given of the server. It does not work when I access the web server(local development server) by it's name.
Please note that the code below sometimes does not work even when the IP Address was given to access the web site.
In my Session_OnStart in Global.asa, I am setting some cookies. One of them, I set as follows:
dim UserID UserID = Request.ServerVariables("LOGON_USER") Response.Cookies("User")("ID") = UCASE(UserID)
When I immediately log the cookie value retrieved from Request.Cookies("User")("ID") into the Windows Event Log, I get the correct value. However, when I try to retrieve the cookie on the home page of my application using the same code,
Request.Cookies("User")("ID"), it either cannot find the cookie or cannot read the value. I am retrieving the cookie before all HTML headers are written. It is my first statement on the page after Option Explicit. I have even compared the session IDs. The SessionID created in the Session_OnStart is the same value as the SessionID on the home page.
I have read that the Session_OnStart only has access to the Application, Session and Request objects. It does not explicitly say that it does not have access to the Response object. Also, I was even able to use Response.Write's in Global.asa to print out the values although it looked like it had also stopped the session after I did so. Cookies are definitely enabled on my machine. I have even tried setting the session cookie's expiration to be persistent for a few days to see if it was perhaps expiring before I was able to read it but this did not work either.
Is there something preventing cookies to be created in Global.asa in the Session_OnStart sub? Is the Response object not available??? Please let me know if anyone else has had this problem or solution.
Is it possible for a user to enable permanent cookies but disable session cookies.....this seems like a contradition yet this is what I appear to be reading in online articles?
I m creating a cookies in my application and it work properly but i can't see the cookies where it will sotred i checked the cookies folder but i didn't find that I want to create a cookies file as the other web site create and store where other cookies will stored in Cookies folder or Temprory Internet files folder eg:1. arvind@google.co[1].txt this stored in cookies folder 2. arvind@msn[2].txt ....
I have this table that has two columns Department and RecId. what I am doing is I need to give access to different people in different departments. So if I am in billing I say billing 76 which is my rec id and than if I also need acess to accounting I say Accounting 76.
So now in my asp page I open this records set to check and see who has access to what departments and give them the access Code:
I want to check whether the value in recordset is "=> 3 ". I try "If rs => '3' then...". But it doesn't seems working. Can I can't check the condition by using the recordset like how i written above? Or do I need get the value in recordset and assign to a variable in order to check the condition. Please advice. Let say my rs now stores a value of "2". Can I check with the following code.
[code] set rs = server.createobject("...") rs.open "Select...", objconn
if rs >=3 then 'THIS LINE DOESN"T SEEMS WORKING .... [code]
I want to do some error checking using on resume next to determine whether to commit an ADO transaction. However we have a custom 500 error page which we use through out the rest of the site. Can I remove the on error resume next after I have rolled back the transaction and raise a normal error.
Is it possible to have an ASP page which checks if a user is in a certain group in Active Directory (AD). For example jbloggs is logged in and belongs to the group "project_allowed". When jbloggs goes to project.asp it will allow him access However when jsmith is logged in and belongs to no groups and tries to access project.asp it will deny him access.
The script is designed as a form validator which checks fields for various criteria and then sends a mail with the form contents. Since 40 different forms will be plugged into this script, there needed to be complete seperation between the two.
I've managed it so far by checking for required fields by putting the word 'required' into the name of the field. The script then sources out any fields which has this text and checks them to see if they are filled out.
The problem I've come across now is that I need to check for field length. My idea was to put the amount of characters needed into the name of the field in the form and then have the script check with a Reg Exp. However, Im not too sure of the regular expression needed to check for this.
Can someone suggest one? The one I have at the moment is [1-14] but say I had a field like this: <input type="text" name="passwordrequired12"> That would match bout for 1 and 12. Any ideas?
How can I check whether a variable is set as a value, integer, etc .. ??? (So that when a user submits a value via a web form and its a letter, i can give them an error note.)
I am writing a script that lets me brows the contents of a web server. The problem is the account that is running ASP does not have permissions to every folder. Don't ask me why ... I have no idea but it can't be changed.
What I would like to do is perform a check for:
Microsoft VBScript runtime error '800a0046':Permission denied
And if this happens display an error message saying they do not have permission to view this directory. Code:
How can I write an asp page, say, CHECKIP.asp that checks the incomin requesting IP address and returns a protected page, based on th checking result? That is, if the IP is a permitted address, the presents a page, say, OK.asp. If the IP is not allowed, then send REJECT.asp. Both OK.asp and REJECT.asp cannot be directly accesse without going through the CHECKIP.asp.
I am a somewhat beginner in ASP. I would like 2 know how do I check whether a recordset, that was fetched from an MS-ACCESS database through a 'SELECT' query, is empty or not?? The scenario is that I m making a form where users can register for my message board. The form will take in all the details and pass on to another asp file which checks whether the username is already in use or not. If its in use then it says that Username in use else the page is displaying error. I m using the following sql. "select * from members where user='" & username & "'"
The error is something like record cannot be found. Either EOF or BOF or the record was deleted.
I got the below code from somewhere ages ago. I have a list of links on my site that link to other sites but I want to check if the link is a valid link automatically and if it fails after x checks (checks every 7 days) then to mark the link as a possible broken link
the below seems to take ages to process and was wondering if there is a better way to do the below. Code:
How to re-write this so it can error check for each individual field. Username, email, password etc.
This is written and validates if the user already has an account in the Database. then it returns the messaage below. But I would like to indentify if it is the username that exist or the email or password. Code:
i wanted some help in the bewlo subject i tried in different code but some time it is showing wrong error.is anybody give me the example or site linke where i can donwload the the password checking script from database. I have pulled data from database and shown those user name in suer tab ( drop dwon box) user need to select the his name and to type password.once user type the password it should check with database . if it exists then it should capture that user name and move on to next page.
I have a simple question. Can you check if a number has been passed through a form? For example I making a website for a property letting company and they upload the property themselves. But if you you put in text into the rent field, it throws up an error when adding to database obviously.I do validate the in put before adding it to the database so was thinking about another IF statement checking that a number was entered before they get as far as adding to the database and throwing up errors
A member logs on and enters a record, if one already exists for that date, then they get a message saying so. If not the record is added and some text is displayed. But it still allows me to enter records even if one already exists! is it because I am storing my dates as strings? Code:
How do i check the format of the field I am reading from a Excel table. I'm using a adodb connection to query an EXCEL/ACCESS table and display it on browser. Is there any way to check the format of a particular field that is bieng read.
For example how do i check whether a field that is read is in date format...?
I have a url containing query strings, e.g. http://domain/page.asp?one=VARIABLE
I would like to be able to check what the variable is, for arguments sake, the letter 'a' or the letter 'z'.I have sent the query string to this, stringone = Resquest.Querystring("one")
Then later on, I wanted to write different things depending on what the query string returned.
IF ---the stringone IS the letter 'a' THEN DO THIS ELSEIF -- the stringone IS the letter 'z' THEN DO THIS END IF
but i dont know how to check whether the string is = to the letter 'z' or the letter 'a'.
We need to spell check Text Areas in our ASP pages. We don't want to use MS Word. We are looking for an cost-effective, easy to configure and use, well-known COM-based Spell Checker component.
Is there a way to query a webserver to see how many, and which, ASP Session ID numbers are still current? (ie: not expired).I'm working on a way to track active Website visitors & wish to compare a Log of Session ID's against those that the Server would recognise as still active.