Close Window After Update Data
i have an Update button. according to flow operation, after customer clicks the button, the new data will be saved and i want to close the current window automatically. how to that?
View Repliesi have an Update button. according to flow operation, after customer clicks the button, the new data will be saved and i want to close the current window automatically. how to that?
View RepliesCan I use ASP code to close the current window?
View Replies View Relatedi have quotation_start.asp which was set to be a small window (height=250, width=500). there is a YES button and some data on this page. when user clicks YES, data will be saved into database, quotation_start.asp will be closed automatically and a new page, quotation_admin.asp will appear in the main window at rightFrame. everything is ok except the quotation_start.asp never close. it remains there. here is the code:
View Replies View RelatedHost Environment: IIS in window 2003 server, three web servers, one load balance, ASP (not ASP.net) code set.There is part A codes in one asp page (page A) to open a new window (Window B). The new window like a clock non-stop running. There is part B codes in
the page A need to close window B.
There is no problem if the there is only one web server. It works. When there is a load balance and more than one web server, then the window B can not be closed.
When using "window.close", a dialog box ask u to comfirm, how to disable it ?
View Replies View RelatedWhat's the best way to close current window silently after finished a
process.
I'm using the the javascritpt window.close() or top.window.close(), but it
fires a confirmation window.
Just want to close it without any confirmation, seems I done it before, but
can't find where.
I wrote an ASP page to export data from the database to an excel spreadsheet file. The problem is, after the user saved the file to his/her hard drive, the export browser window still remains. How do I close the export window after users saved the file?
View Replies View RelatedI am calling an asp page from my flash file & the asp code is as follows: Code:
View Replies View RelatedI want to close the window without the warning "internet explorer is trying to close..." being displayed. I want to do this with vbscript. I found out that in javascript you can do it by including window.opener='x' followed by the window.close statement.My code is:
Code:
Response.Write "<script type=""text/vbscript"">"
Response.Write "MsgBox ""Hi. see you again"""
Response.Write vbcrlf
Response.Write "window.close"
Response.Write "</script>"
is thr anyway i can get this done in this code?
In an asp page I have the following scenario happening (or would like
to happen)
person picks a menu item in main page which opens a popup window that
allows customization of that menu item. Upon submitting that page the
results go to a second page in the popup window for collection into
variables.
I was hoping to just close that second page, but
everything I have tried results in a message window stating the
program is trying to close the page (y or n). I was hoping to get rid
of this, but can't seem to no matter how hard I try.
There are many examples on here that seem rather old and may have
worked with former versions of IE without problem, but none have
worked how I wanted.
Does anyone have suggestions on how I could get the above...or even
modify things so that maybe the original popup window can be
closed...I do wonder if its the fact that a second page has been
opened in the popup window.
the line:
Response.write "<td class=""form""><a href=""java script: document.close();"">option2</a></td>" & vbcrlf
doesn't close my current window
Is there any code in asp to auto close a window after a certain amount of time?
View Replies View Relatedplease any body give me the code for disable the close button using asp
View Replies View Related<%
Response.Write("<script language=""JavaScript"">window.close();</script>")
Response.Redirect("mailto:abc@def.com?subject=Comic Relief Bids&body=2 - "&Request.Form("bidAmount")&"")
Response.Write("<script language=""JavaScript"">window.close();</script>")
%>
the code above - I want to send the email and then I want the window to close, however, everytime I do it, a messahe comes up saying: "Object Moved. This object may be found here." The email itself opens but the window doesn't close.
I would like to capture window close event, i.e. when user clicks "X" button of the browser, I would like to close all open dataabse connections.
Also, I would like this to apply when a user tries to close browser using File > Exit or when the user tries to type another website URL in the browser.
We have a solution where we want to control the number of users logged
in at the same time.
So when the user log in we check number of currentusers agains
allowedusers and increment a currentusers (in the database).
On Session_onEnd or when a user logout (actually I abandon the session
on logout) we decrease currentusers.
But as we all know when the browser is closed or the user just go to
another site this decrease does not appear.
It will of course trigger when Session goes to timeout, but I imagine
a lot of angry users calling support when they are denied access.
I have a datagrid displaying data. There's an "edit" button, which I use Javascript to create a popup window where I can change the information. There's a "save" button on the pop up window.
Currently, I have to click the save button, and the the close button to close the pop-up window, go back to the calling page and refresh it before the information is updated in the calling page.
I would like to be able to use the "save" button on the pop-up window to close the pop-up AND reload the parent page. Is that possible?
I want to create a new window for update as like as In this forums when i click reputation icon a new window will appear and when i write the comments and click the Add reputation buton window will close.
i have two pages one for displaying records and another for update records and it works fine.
I have a main window which shows all records from a table. When a user clicks on "Edit" for a record, a popup showing information of the selected record is displayed.
The user then changes the information on the popup and clicks "OK" button which calls an ASP page to update that record in the table. Everything works with no problem up to this stage.
My problem start after the update process. I need to know how to close the popup and then refresh the main window showing the updated information....
Does anyone know how to post form data to a popup window either by using ASP or JavaScript? I have a form full of inputs and I want to open a popup window where the processing can take place.
View Replies View RelatedI have data that needs to write to a temp table (there is a lot of data sometimes). Once they are finished, the user approves their input and it goes to a permanent table.
I give them the option of deleting that data by cancelling their request.
The problem I have, just to be on the safe side, what can I do to protect myself if the user closes or perhaps browses away from the page? Is there any sort of an window command whereby I could enable a sort of a kill-like function?
Dreamweaver created code to update to data base. But when testing on website i get the following message. I have no clue what it might be.
Microsoft JET Database Engine error '80040e14'
Syntax error in UPDATE statement.
/admin/update.asp, line 111
line 11 is strName.execute
I read it might be forbiden characters in the data base field names or spaces...
but i don't have that. the names are userName, userLevel, ID, Password.
I want to post the form data (http://server/page1.asp) to a modal dialog
window (http://server/modaldialog.asp) with a desired height 200px by width
200px.
Here's my attempts and problems:
Attempt #1) In http://server/page1.asp, it has code <form
action="http://server/modaldialog.asp" method="post" target="_blank">
In http://server/modaldialog.asp, it has code <body onBlur = "self.focus()">
It can produce modal dialog window modaldialog.asp, but I want to set the
width and height of modaldialog.asp.
Attempt #2) var sReturn = window.showModalDialog("modaldialog.asp", params,
"dialogHeight:200px; dialogWidth:200px;");
This is the effect I want. But this is not posting the form data to
modaldialog.asp. Any workarounds to my problems??
Is it possible to post the form data and open the page as a modal window?
Because when I do the following, it will open page2.asp in a new window, but
I still able to manipulate page1.asp. I want to make page2.asp as modal
window.
<form action="http://server2/page2.asp" method="post" target="_blank">
Any ideas?
I want to post the form data (http://server/page1.asp) to a modal dialog
window (http://server/modaldialog.asp) with a desired height 200px by width
200px.
Here's my attempts and problems:
Attempt #1) In http://server/page1.asp, it has code <form
action="http://server/modaldialog.asp" method="post" target="_blank">
In http://server/modaldialog.asp, it has code <body onBlur = "self.focus()">
It can produce modal dialog window modaldialog.asp, but I want to set the
width and height of modaldialog.asp.
Attempt #2) var sReturn = window.showModalDialog("modaldialog.asp", params,
"dialogHeight:200px; dialogWidth:200px;");
This is the effect I want. But this is not posting the form data to
modaldialog.asp.
Any workarounds to my problems??
If iam tring to update data to database thro asp coding it is showing error as follows
Microsoft JET Database Engine error '80040e09'
Cannot update. Database or object is read-only. Code:
I want my users to be able to update their data(they store hours spend in different courses per week) stored in the Access database. So far they are able to update only one record(i.e. for only one week).....all they do is search for their records using their User_Id and click the WeekNo they want to update.
when there are (e.g. WeekNo1, WeekNo2.....) the user can only update data for WeekNo1 and when they click WeekNo2 the link takes them to WeekNo1 data.Please guys I need help cos I've been trying so hard to figure out what might be the problem and failed.
I am really having a problem with trying to get my datagrid to update my data base.
I have tried 2 different sets of codes, but when ever I enter the new data to be updated and click update, the datagrid will just return to the orginal datas. There is no updating done. I really am very new to this. Please advice what are the problems in my code that I must change. Code:
I didn't know how to use asp to update or insert the excel data ....
View Replies View Related1. I have a form, with a textbox and a button. I have to enter a value in the text box and then i have to click the button, which opens a popup window. Here i want to pass the value of the text box which is entered in the parent window to popup window.
I have to use that value in the popup window's form_load event in the Code behind, and i have to take the values from the database using the value which i have entered in the parent window. Code:
I want to provide a lookup facility for users to select a code from a list. I want this to be done in a small popup window, which, when a code is selected, will close down and return the selected value to the main form. Can this be done ??
View Replies View RelatedI'am not familiar wit ASP but I have to maintain an application. In a window there are some text selection fields and a search button. If you press on the search button record list is build according to what is filled in the selection fields. You can select a record and then a detailed window is shown or in another occasion a popup window is shown.
The request is now if the opened window or popup window is closed, then the opener window has to be opened with the same content (content selection fields + record list) as it was before the window or popup is opened.
Now I thought that I have read that every window which is opened gets an ID and that it is possible to call up that window by the ID from the cache again. Is that right? And if so? Or has somebody a better idea. Code:
Okay there is an unique EventRegID for every registration. When people first register they get pre-registered. Then an admin comes in and confirms or wait list them (based on whatever requirements). My question is how can I tie the EventRegID to a form with multipule ID's so they can batch confirm or wait list the PreReg list? Code:
View Replies View Related