My name is Abhishek. I am writing a code in ASP which wants to access all records from SQL Server database where date lies between 11/24/2004 and 12/20/2004.DateVal is a field in custdate table.Can u reply me ASAP i.e. within 2 hours.
View Repliesi am trying to get a piece of code that will check a value and then act accordinly - the usual thing with a For loop enclosing IF THEN ELSE loops - heres what i have
Code:
FOR removecounter = 1 to 15
IF removecounter = Session("newoptions") THEN
response.write "THEY ARE THE SAME - NOTHING TO CHANGE<br />"
ELSE
IF removecounter < Session("newoptions") THEN
response.write " NOTHING TO CHANGE <br />"
ELSE
' the only other thing it can be is > Session("newoptions")
response.write "BLANKING THE UNUSED<br /> "
END IF
END IF
NEXT
the Session("newoptions") is a value between 1 and 15 - i simply dont understand why this thing doesnt work
I am doing a scheduling system. The concept i have but i am weak in my programming, therefore i hope that u all can help me on this.
i have a capacity (uph x shift x 7.17) and orderperday (total orderqty per month / total shift per month)
the thing that i am not sure in is, i want to do a comparison it is becoz there is a capacity limit per day. i cannot afford 2 produce overlimit. so if the orderperday > capacity then orderperday - capacity = balance. balance will be bring forward to the next day to produce. then the comparison will be done again. i am not certain on how to do the looping in this context.
I am creating a website that is going to ask the user to enter a date! then
from an access database get all records where a date field is greater then
the date entered! Sounds simple, I do it in vb all the time!
here is my sql line: Select * From Participants WHERE DateJoined > 01/14/07
ORDER BY TournamentID
it updates fine with the date the user has entered! I know in vb I need to
put ## around the date I am comparing! I tried that, I tried %%. still I
am getting all records from the database
i want to compare two string where one is stored inside acess DB and othe one is input by user! so what is the if statement should be look like!
if (string1==string2){
alert("Same")}
else{
alert("Wrong")}
what wrong with the code above?i try that code but could not work!
I need to compare an IP address to a database that contains ranges for each byte in a potentially "valid" IP.
Columns in the msSQL db are IP1, IP2, IP3 and IP4.
The problem is that one entry in the database may have a range. If I were to query all four columns and concatenate the data, I may get something like this:
12.35.124.12-89
So if a user sends me 4 variables (1 for each byte in IPv4) over a form, how I would I begin to compare this data?
I have problem regarding the Dates. I am storing Expiry date of the item in DB as varchar since I want date to display in the format MM/DD/YYYY HH:MM.
From user I am taking expiry date in dd/mm/yy hh/mm format and then using toLocaleString() function to convert it into string to store in Database. This function stores date in the format
Sunday, May 1, 2005 10:00:00 AM.
Now at the time of displaying items I am comparing this date to current date. I want to display items which has Expiry Date greater than today�s date. But it is not giving proper result. It is showing items whose expiry date is previous than today�s date. So not showing the desired result.
Just wanna ask if any1 noes the method to compare between current date(today) with other date and state out the difference of days in between? and also for current date(today) is it date()?
View Replies View RelatedI am writing a script that allows a user to edit one record and its fields in a MSSQL database. For the time being I don't mess with the data, I just display what the script thinks should be updated.
Output is below.
Field name => Original Value = New Value submitted by user
Code: ....
If the 2 variables after comparsion return true, then the statement: This file had been inserted already will be displayed! but currently, there is nothing shown when i execute
ResultSet rs = stmt.executeQuery("SELECT * FROM DATES");
while(rs.next())
{
String date1=rs.getString("Dates");
%>
<%if (date.compareTo(date1)==0)
{%>
<%=("This file had been inserted already!")%>
<%}}%>
I'm comparing a date held in a string with a date held in an access database using an SQL query. However despite tests in which the string and the date held in the database are exactly the same, no matches are found.
Here is my SQL query:
SELECT id, TimesheetDate FROM Timesheets WHERE TimesheetDate=VarDate
The format of the date in the database and the format of the string are exactly the same.
I understand this is because the VarDate variable is a string and not comparable so how do translate the string into a date format the database can make a comparison with? I've tried using CDate() with no luck.
I am doing this here:
dim i
dim j
i = 10
j = 10
If i = j then
But it is giving me a false result...
Any ways to do this comparison so it gives me the proprer result?
I'm looping through database results where I have a date time field in the format: 9/2/2007 6:28:53 AM. What I'm trying to do is flag entries that are within the next 12 and 24 hours with a different color. I'm doing this currently with a counter field on another project like this:
PMCOLOR = "#000000"
If cLng(rs("target_current_value")) > cLng(rs("target_value"))- 2800 Then
PMCOLOR = "#FF0000"
End If
If cLng(rs("target_current_value")) > cLng(rs("target_value"))- 1400 Then
PMCOLOR = "#FF9900"
End If
This turns the line red if the current value is within 1400 of target and orange if its within 2800 of target. I want to do exactly the same thing with the date/time field flagging entries red if they are within 12 hours of the current time/date and flagging them orange if they are within 24 hours of current date/time.
I'm not sure how to break down the time and date and compare them to the current time and date, though. Its easy with integers.
I had a script set up to create a redirect until a certain date, and I
left the script in there after that date thinking it would just be
dormant until I changed the date parameters.
To my surprise, it started redirecting again. I must not be clear on how
dates work.
Here is the very simple code:
<%
if date < "8/20/2005" then
response.redirect(url)
end if
%>
I want my website to support multi-lingua, so I add Codepage="65001" in my english website.
However, after adding that, all the string comparison failed (login page, catcha).
I thought I only need to add codepage, then my website will become multi-lingua site Did I miss something?
I have a site where I need to compare the current date with the clients wedding date. (ie: 3/09/2005 with a wedding date like 6/15/2006) Here is what I'm using now.
CIExpires = DateDiff("d",CurrentDate,WeddingDate)
It will give me either a positive or negative number. I then just use this to either show or hide a link.
If CIExpires <= 0 Then
'don't show link
Else
'show link
end If
What is the best way to do this? The one above just doesn't work.
I am doing a date comparising. Is it possible to compare a selected date with current date which call from date function in VBScript. If can please show me the coding or reference or source online. Or you all have any idea on it?
View Replies View RelatedI am back with another question. I need to have the user input two dates for a date range--thats easy! But now I would like to pull all the files up in a directory that are within that date range. I don't know how to do a comparison on dates.
I already have a working script with a loop pulling up all the files in a directory based on one date entered and listing them ---now I want to make it pull up all the files within this date range---just need to know you can do a date comparison in asp.
I am trying to pick up records from a date range without much luck. For my
example below I am trying to pick up all records made in the last month.
However none are being found (my code is tried and tested for all records).
My database is in Access format. Field "datetime1" is of Date/Time data type
getting the default value by using now()
The relevant part of my code is as follows. Can anyone see what I'm doing
wrong?
I have looked all over the net and even down the back of the sofa but I've been unable to find any scripts that allow me to add price comparison functionality to my shopping cart. where a script might be or even offer some pointers as to how I might go about doing this.
View Replies View Relatedquestion on string comparison in SELECT statements
--------------------------------------------------------------------------------
First off, this is not the standard problem that can be solved by using:
SELECT * FROM table WHERE string LIKE '%abcd%'
It's actually sort of the opposite of that. I'm looking for a query that can take a string variable and will return only rows where the complete string in the relevant column is a string of the variable passed to the query. So for instance, if the variable passed was 'abcd' then...
rows containing only these strings in the relevant column would be returned:
'abcd'
rows containing these strings in the relevant column would NOT be returned:
'abcdefg'
'abcdxyz'
'abcd1234'
'abcde'
'af'
'hijk'
Is there a way to do this with a MySQL query?
Thanks in advance.
In a connection string, I have the following:
sql3 = "SELECT DISTINCT State FROM Property Where TypeID = '" & srch_cat & "'"
In the database, is a field called expiredDate I am trying to show only records whose expiredDates are greater than todays date, but I am messing up somewhere. The values in the fields are as this: 3/7/03 (or something like that...no time is added to it)
i have an admin page where i have to enter dates.
I enter them in french format : month/day/year, i save, when the page is reloaded, they appear in french format, "day/month/year"... if i save again, they will ve swapped again.. and so on....
what i'd like to know, is how to know the database supported format, the server date format and how to correct this little problem in my task management system i am developing.
lately i just migrate my website to a US webhosting (i am from malaysia) and since then the date is 13 hrs behind.
Understand that to solve this problem i will just need:
DateAdd("h", +13, now())
and the output will be:
4/16/2006 12:30:03 AM
The question is how do i just get 4/16/2006 (without the time)?
I have this query:
SELECT COUNT(appold.reason) AS Insufficient_Information
FROM appold
WHERE appold.reason LIKE 'Insufficient Information' AND (appold.`date out`
BETWEEN MMColParam1 AND MMColParam2)
MMColParam1 #01/01/2003# Request.QueryString("date1")
MMColParam2 #20/01/2003# Request.QueryString("date2")
and using this link to set the values:
page1.asp?date1=#01/05/2003#&date2=#30/05/2003#
When I test this in the recordset dialog it shows up with the correct count but when I use the link as above I get a 0 count, what am I doing wrong?
I am writing an app that uses ..Now()...
How do I allow for time zone differences?
If I understand, Now() pulls the server time.
I have a form with 2 fields: Beginning Month and Ending Month. I want to be able to allow the user to select a beginning month and ending month and when they hit submit, it will retreive all records in the table where the month field is equal to or inbetween the months the user selected.
For arguements sake lets set:
strBDate = Request.Form("txtBeginDate")
strEDate = Request.Form("txtEndDate")
SQL: SELECT tb_admin.[Session#], tb_admin.Date_from, tb_admin.Date_to FROM tb_admin WHERE ????????? ;
I know how to connect to the database and pull the data using SQL and WHERE statements but im not sure how to form this WHERE statement.
When I try to select records which have a date greater than todays date it brings back the incorrect records. I think I'v tried everything to get it working and may have missed something. Basically here's what happens.
Todays date is 04/05/2005, but the sql will return records which have a date of 05/04/2005 or greater. Heres the sql:
Select * From trainingCalendar2 where startDate > #04/05/2005# Order By startDate;
And Returns:
2 Course Test 4 07/04/2005 Mandatory Training
10 SAP Training 29/04/2005 External Course
12 Create Course 2 17/05/2005 Internal/Upskilling
I have checked the regional settings and they are correct. When I open the database and look at the records they are of the correct format.
Even when I look at the records in the site that are the correct format. I think it's access but I thought that access was supposed to have the same regional settings as the computer.
Ive got a variable in my code which is used to calculate the age of an entry in the database. The runtime value for the variable is set to Now-14 which checks to see if the article is more than two weeks old. I can change the value to Now()-21 and it still works (flagging all items 3 weeks or newer, but if I increase this to 28, 30 or anything above,
View Replies View Relatedim using date()to return the date in the format dd/mm/yyyy is there any way of changing this to yyyy/mm/dd and the next question is what is the correct delimiter for date in sql statment is this correct?
sSQLinsert into productioninfo where Entry_date = #" & mydate &"#"
How can i add "0" on Months and Days in ASP...What I want to happen is when it saves
to the database it saves 09/01.. this is my sample code:
Day(Request("DateReceived")) & "/" & Month(Request("DateReceived"))
On the code it only return the value 9/1.
i have a page which allows the user to enter an amount of holiday for a year. so i have a inputbox and a submit button. user details are kept in a sql server database in a table. and one of the fields is startdate.. which basically when the user starts using this system he has to enter his personal details and which one of them is the startdate field.
i need to create a function of something that allows me to add the number 5 to the amount which the user adds for a holiday year. This only done once therefor if the users start date exceeds 5 year i need to create a function to add the number 5 to it. the code which i have at the moment ... basically selects the user from a View which i have in my sql server database. obviously it retrieves the users.. record.. depending on what the user inputs as a holiday number in the input box and then it is updated into the table in my database.
I have a problem I'm trying to find the difference between 2 dates in a form. I would like textfield3 the differnce between the dates.:
<script language="JavaScript" type="text/JavaScript">
<!--
<!-- Begin
function calc3() {
numtextfield3 = (document.Form1.textfield1.value -
document.Form1.textfield2.value);
document.Form1.textfield3.value = numtextfield3;
}
// End -->
//-->
</script>
I keep getting an error what I want is if:
textfield1 = 12/03/03 12:05 and
textfield2 = 12/03/03 11:10