Convert State Names To 2 Digits
I currently am using a script which submits full state names to a payment processor. However, the payment processor only accepts 2 digit state names. Does anyone have a premade code for asp that converts state names into 2 digit ones.
example:
If statename = "New York" Then
statename = "NY"
End If
for each state.
View Replies
ADVERTISEMENT
How do you change the DateDiff function to give only 2 digits?
[CODE]
ltOffHours = Abs(DateDiff("h", CDate(rsRecs("EndTime")), CDate(rsRecs("StartTime"))))
ltOffMinutes = Abs(DateDiff("n", CDate(rsRecs("EndTime")), CDate(rsRecs("StartTime"))))
ltOffTime = ltOffHours & ":" & ltOffMinutes
It gives me I.E. 4:345, I need have it read only 4:34 minutes. anyone know how to do this?
View Replies
View Related
How can I create a loop that goes from 01 to 12, to show months of the year as two digits, or how do I change "1" to "01"
View Replies
View Related
This is probably an easy answer, however my mind seems to have gone blank about scanning a barcode in, and taking the 1st 4 digits of the number and storing it into a session variable to be referenced later in this application.
This session variable will then be checked against an ACCESS database to see if the product exists. I assume I use the LEN function? LEN(VariableName, 4)?
View Replies
View Related
I saw in SPF an ASP code that was usable to hide the first digits of a credit card number and replace them by a "*". I'm really sorry to post such a thread, but I can't find it back. Does anyone have the link? I've tried to check it in the funky functions and sections like that. Maybe just missed it but well. tried to see many times.
View Replies
View Related
when I calculate a Digits for example: 101.12 * 1.21 the resilt is 122.3552 This one should be 122.36 and if it is 122.3549 to be 122.35 How can I make this thing works?
View Replies
View Related
I have an access database with a table called jobs with a field called 'jobnumber'. I have this set up with a format mask of "0000" so that "1" becomes "0001" etc.
However when pulling this data out in Dreamweaver the formatting is lost.
Does anyone know how I can set this in Dreamweaver?
View Replies
View Related
converting a single
digit (ie: 1, 2, 3, etc) to double digits (ie: 01, 02, 03, etc).
I am trying to convert the date in DD/MM/YYYY format so it is always displayed as 01/01/2004 instead of 1/1/2004.The script I am trying to embed this into has similar attributes to the Calendar on this site located at http://www.asp101.com/samples/calendar.asp.and the objects that require to be double digits are iCurrent and Month(dDate).
View Replies
View Related
I am using Ms Access database and I have set 3 digits (e.g. 000) for an autonumber field of my table.Its working fine in Access and incrementing automatically like this (001, 002, 003 ...), but when I call the data on a web page using ASP its displaying these numbers like this (1, 2, 3, 4 ...) I dont understand why is it not displaying the numbers as it is in the table.
View Replies
View Related
I am storing a datetime into SQL Server 2000 field in datetime format. For single-digit months and dates, it is leaving the 0 off, like this:
11/6/2003
1/5/2003
For reasons having to do with technical requirements, I need to have it put the 0 in when needed, and not do it when it already has 2 digits:
11/06/2003
01/05/2003
How can this be done? When I get the value of the date in the first place, it is using the Now() function. For some fields, I only need the date, not time, so I do a DateValue around the result of the Now. Is this solved with ASP? Or do I need to do something in SQL Server?
View Replies
View Related
in my asp form i would like to have a field which can ONLY accept
digits BUT can accept special characters as well such as: &,$$,##.
i.e: if the user enters :
147hhh, or P44556HH or QSSPE$% ---> this will be invalid
##123,45SS---> this is invalid
125&125#10$---> this is valid
12456--> this is valid too
is there any way to do this????
View Replies
View Related
I have variable, say "total". It can be an integer or floating number.
No matter what value it stores (5 or 5.1 or 5.24), when I display it, is
there a way I can make it display it with fixed 2 decimal digits, like 5.00?
View Replies
View Related
I have a 5 digit account number, but I need only the first 2 digits of the number.
This shows the account number <%=rsSelSpecials("olaid")%>.
View Replies
View Related
i have a form for users to enter their name password and e-mail,i am currently using javascript to check that all details have been filled,
if(myForm.fname.value=='')
{
alert("Plz enter a first name")
return false
}
This works if the field is left blank however if the user enters numbers(1,2) or spaces i.e.(" ") how do i deal with these,i also need to check that the e-mail contains "@" and "."
View Replies
View Related
I need a function for blocking or converting letters inserted into a Form to digits, since the Data will be used in mathematical functions.
Is there a specific seach-function for letters, or:
If Input1(not a digit) then...
Else... Input1 * 5...
?
View Replies
View Related
I currently am using a script which submits full state names to a payment processor. However, the payment processor only accepts 2 digit state names. Does anyone have a premade code for asp that converts state names into 2 digit ones. Code:
View Replies
View Related
It seems that I am assigning to the session rather than comparing against.
I want to compare it in the first peice of code but it seems that I am
assigning to it. When the user first requests the page they are not a
member.Heres my code:
If(Session("IsMember") = "True") then
'Do Nothing
End if
'should still not be True
If(Session("IsMember") = "True") then
Response.write("IS TRUE")
End If
'Response.write is working telling me that the first part of the code
assigned to the session
View Replies
View Related
how can i pass state for each user through pages without using
session,cookies,hidden form fields,querystring or database, which knowledge
base article 175167 refers? i don't want to build a form with hidden fields
and get it posted on the client. it seems possible using server variables,
response.addheader method, but how can i use it?
View Replies
View Related
I hav developed web application using ASP.net 2.0 there are just 2 pages only. Both are works fine in visual studio. But same when i run on IIS 5.1 ....the page without session variable works fine.
But the page with...even the Sub() with session variable won't works.....even it automatically reaches the last sub of the program.
What are the changes i hav to do in IIS / application or web.config file.
View Replies
View Related
I am learning asp.net using Zak Ruvalcaba's book from Sitepoint. When trying to do the example on application state from chapter 11, i get the following error:
Object reference not set to an instance of an object.
This is the offending line:
Application["PageCounter"] = (int)Application["PageCounter"] + 1;
I downloaded the code from the book's website. I get the same result.
View Replies
View Related
Is there any way a Form can be made automatically not retain its field values after it has been succcessfully posted in classical ASP. Something like the way ASP.Net can perform state management in postbacks automatically.
View Replies
View Related
we've just set up a subdomain,'demos' for one of our projects that normally works fine. on the login page, if the user enters the correct username/pw, we write session info and then response.redirect to the home page. this works for on the normal site, but session state info is dying on the demo subdomain.
i'm sure the session info is being written since i can see it when i response.write the value. also, the response.redirect uses a relative path, so it's not that we're accidentally changing domains.
View Replies
View Related
I have an asp/javascript page. The page has several hidden layers. When the user clicks a button, a layer becomes visible.
How can I check the state of a layer to see if it is hidden or not in asp code?
View Replies
View Related
We have an ASP site that uses a MySQL db backend. Usename/Password authentication is stored in db tables. We are currently using session variables as a means for validation when the user navigates to new pages. Generally speaking, all this does and has worked fine
The issue is with abandoned sessions. For instance..
Joe user clicks the [X] in the upper right hand container, closing out IE or firefox. IIS will not terminate the session for ~ 20minutes(default), leaving these resources unavaliable.
In our situation, (and possibly a different issue) unless the user clicks the [EXIT] button we've provided, not only does the session persist for 20 minutes, the login state saved in the MySQL table stays locked. Before the User can log back in, they need to call us to reset their state.
I'm looking for some kind of solution to address a user exiting the application abnormally. I am not sure of the correct procedural methodology, but I would think that some kind of process or event trigger would run in the background looking to cleanup stale sessions. Code:
View Replies
View Related
I have a problem where the session state will not be enabled on the server.
We are using Framework 1.1, a non-Sql Server database, and will be moving the
application to a web farm in the future. Is there any way to keep the session
state on a relational database that is not Sql Server? If so, how?
View Replies
View Related
I was thinking about disabling session state on some of my pages by doing this:
<% @ EnableSessionState = False %>
My question is if I disable the session state will the page still reset the session timeout (eg. back to 20min. default) when that page is loaded? I need it to reset the session timeout.
View Replies
View Related
I'm looking for a working example on how to share session state between ASP
and ASP.NET.The solution of Y Yeung of Microsoft seemed to be a good solution but I did
not get the asp part working.Anybody tips, tricks, links ?
View Replies
View Related
I have been storing an object as session variable, such as
set session("oRS") = Server.CreateObject("ADODB.Recordset")
The page then redirects to another page. i need to use this object on the called page, but i encounter an error saying 'User session has expired.' On checking with the code, it was found that the sesion variable has not maintained its state for object 'oRS'. Although, session for string type variable are maintained.
View Replies
View Related
i have a form having hyperlink calling the same page.on click on hyperlink i am
submitting form "Onclick=dosubmit(form1);"
dosubmit{
document.form1.submit();
}
but i am not able to retain session data.how can i retain session data.
View Replies
View Related
I will soon be undergoing a project where I will be migrating four to five web applications, developed in classic ASP, from a single Windows Server 2000 to a web farm that will utilize two, Windows 2003 Servers.
All of the applications utilize user/session management and I know that ASP's built-in session management cannot be carried across multiple servers.
I've been researching products available for purchase out there on the web, which allows you to include new code, which overrides ASP's built-in session management, by using a database to store sessions.
They all advertise that their solutions simply require just one line of code to be added to each ASP pages that uses Sessions, without any other changes to the existing ASP code.
Can someone who has done something similar advise on their experience? Is this really as easy as they are advertising, or are there other issues to take into consideration? Code:
View Replies
View Related
I am trying to Seperate the City and State from one table row to another table row:
Field is name LANDMARK with valeus as Atlanta, GA
Want to get
City = Atlanta
State = GA
into two sperate fields
This is what I have
"STATE = "Right ("LANDMARK",2)"
View Replies
View Related
I am trying to Seperate the City and State from one table row to another table row:
Field is name LANDMARK with valeus as Atlanta, GA
Want to get
City = Atlanta
State = GA
into two sperate fields
This is what I have
"STATE = "Right ("LANDMARK",2)"
View Replies
View Related
We are running windows 2000 with dot.net framework 1.1 on IIS 5.1. This is an NLB architecture with the session being stored in an SQL DB. We have been coding and deploying using ASP.NET with no problems however the 'powers that be' have recently bought an online booking application which has been coded using classic asp.
We have set the session location in the machin config of the framework stating
mode="SQLServer". Will this ASP use this or continue to store the code InProc?
View Replies
View Related