Date Formatting
I have a client that wants a time field to resolve to 7:00 PM rather
than 7:00:00 PM (wants the seconds gone). vbLongTime provides the
later but vbShortTime produces a 24 hour version or 19:00. Any
suggestions?
ADVERTISEMENT
Date Formatting
i have a date in the following format: 12/1/2003
how do i reference just the 'day' portion of this date - in other words '1'
if the date was 12/10/2003, then i would just want the '10'
Date Formatting
I am trying to display dates in a spreadsheet, but the dates need to be in a
format that will allow them to be sorted in Excel. The datatype in the SQL
Server database is datetime. In this case, I need to display the date only,
not the time. But I don't want to change the datatype in the database
because the time is used in other places.
So what I am doing is pulling it out of the database, then modifying it in
ASP/VBScript by using the datevalue function. This results in values such as
3/31/2006, 4/3/2006, and 4/14/2006. The problem is, the ones with the
single digit date (4/3/2006 in the sample data I just listed) messes up
Excel's sorting capabilities. How can I force the dates to display in a
2-digit date format? It would probably be good to do the same for the month.
Date Formatting
does anybody know if you can change the format of
a date from the us version 10/20/04 to the european way
20/10/04?
Date Formatting
I currently am showing Todays date on the page as follows:
<%=Date()%>
I would like to show it in Day of Week, Month, Date, Year which normally I would
show like this: <%=FormatDateTime(rstemp("StrDate"),1)%> where StrDate is a date/time field name.I want to do something like that with <%=Date()%>. Is there a way to do this?I am also using this to show Tomrrow's date also:
<%=Date() + 1%>
Again, I also want to show the date the same way.
Date Formatting
I know I could write one, but is there a built-in VBScript/ASP function to take a date, which is in the format mm/dd/yyyy, and put it in a yymmdd format?
View Replies View RelatedFormatting The Date In Asp
I've got ASP to display the date in the format mm/dd/yy - i'm assuming thats the default value for date(). how to format that so it is in the form dd/mm/yy ? Or is ASP just returning the date format from however it is configured on the web server?
View Replies View RelatedDate Formatting
how can I format date that always return in fixed width. for example..
if the date is 1st jan, 2003..
it should return 01/01/2003 not 1/1/2003.i need date format always in 10 characters.
Formatting A Date
I have the following at the top of my page :
Session.LCID = 2057 'UK
which sets local date/currency settings to UK. But despite this, a date entered as "28/01/1999" and stored in Access as "28/01/1999" is displayed as "01/28/1999". I haven't a clue whats happening.
Date Formatting
How do I perform the VB : format(now,"yyyy-mm-dd") in vbscript. It seems not to like 'format' ..
View Replies View RelatedFormatting The Date
I'm formatting the time that I'm storing. I'm trying to use:
riTimeIn = FormatDateTime(("timein"),3)
The problem is, since i'm using an insert i'm not using any recordset, so the code will not work. It will work like this (riTimeIn = FormatDateTime(rsdata("timein"),3) with the recordset. Do I just create a recordset.? Or is there away to get it to work without it?
Formatting The Date
I currently drag in a date stored as dd/mm/yy in my access database into a recordset and subsequently onto my asp page. What I want to do is format that string so that it returns to the html code dd.mm.yy - could somebody could help me out here?
View Replies View RelatedFormatting Date
I have a question regarding the date format. I am using an Access database as the backend. In Access there are only two formats, short and long.
Is there anyway to display the long date but without the day of week spelt out? In other words, I want January 24, 2006 and NOT Tuesday, January 24, 2006.
Formatting The Date
I have a field in my mysql database that is configured as 'DATETIME' and '0000-00-00 00:00', which i populate using the 'NOW() function, this returns a date in the format
2004-09-18 22:08:26
I would like to have this displayed in my web page as
Tuesday, 18th September 2004 at 10:08 pm (or something very similar)
How would I go about doing this?
Date Formatting
The dates stored in my database are in dd/mmm/yyyy format but when it displays on the browser, it changed to mm/dd/yyyy format. Does anyone know what had went wrong??
View Replies View RelatedDate Formatting In Oracle/ASP
I'm returning a date (5th Jan 2004) from Oracle using the
following query:
select TO_CHAR(invoice_date,'DD/MM/YYYY') from...
This should return my date in the UK format, and it
certainly appears to be doing just that in Toad. And it
also looks correct in my form as it shows as:
05/01/2004
However when I submit my form I am having to convert the
date to an Oracle format using this function: Code:
Formatting Date Change How Can It Possible
I'm currently entering the date into my date field using the now()
function, which delivers this result: 2/2/2004 9:08:09 AM which is
fine for some cases.
However, when retreiving this result, sometimes I'd just like to pull
up the first part, such as the 2/2/2004 and cut out the rest. How do
I take this date output, and format it to show only what I want? I'm
writing all this in ASP.
Time/Date Formatting
I am having a little bit of trouble converting some time/date formatting.
I am retreiving it from an existing database we have (MS SQL) with
"SELECT * from table"
It is in this format "01/02/2005 13:31:00"
e.g. "DD/MM/YYYY HH:MM:SS"
I need to convert this to the format to YYYY-MM-DD e.g "2005-02-08"
Any suggestions would be appreciated. Perhaps some sort of more advanced sql query, or ASP scripting.
Custom Date Formatting In ASP
I would like to generate a custom date format for my ASP output ... i.e.: "5 Apr 06" instead of the "05 April 2006" that the British English 2057 LCID automatically gives me. In other words, I would like a 3 digit month and two digit year.
The code on my page reads as follows now ...
<%= DoDateTime((Recordset1.Fields.Item("StartDate").Value), 1, 2057) %>
Insert And Date Formatting
i am having with my classifieds ads site, i am using Access. I little info first: every ad that is posted automatically includes the date it was placed, and on the actual ad page it shows when the user posted the ad and when it will expire.
the script always displays all date formats as so: mm/dd/yy however after using the following code in my asp files: session.lcid = 2057 it formats all prevouis ads like this: dd/mm/yy and that is what i wanted. Now here comes to the problem after inserting the above code every new ad that is posted on the site still shows the mm/dd/yy (us format) and i do not understand why.
Date/Time Formatting Of Now()
how i can format a date/time field from an access db, so it displays the date followed by just the hours and minutes of the time and not the seconds. The information is stored in the db using Now() so it contains the date and the time. I want it to show dd/mm/yyyy hh:mm .
View Replies View RelatedFormatting A Date Into Yyyymmdd
Is there a quick way to format a string in this format yyyymmdd in ASP / vbscript? I want this format because I want to pass the formatted date to a SQL Store procedure for a query on searching for date. The type of input could be something like 611974 (aka 6th January 1974) or 2091980 (aka 20th September 1980).
View Replies View RelatedFormatting Date & Time In VbScript
I'm passing the current date and time to a DATETIME coloumn in my database and it's so far proved very finicky about what format it will accept. It seems to want it like so:
yyyy-mm-dd hh:mm:ss
I'm not sure but I think it will only accept the '24 hour' time. (Military time; ie. 17:58:23) The following line of code works and the database will accept it:
Code:
Year(Date) & "-" & Month(Date) & "-" & Day(date) & " " & FormatDateTime(Time,4) & ":" & Second(Time)
But it seems like an awful waste of declarations. Can anyone suggest a sleeker way of getting the date & time formatted so the database will accept it? Or if you're familiar with the MySQL DATETIME type, let me know the best acceptable way to pass this info.
Easy Date Formatting Question
I have a variable that represents a standard mm/dd/yyyy date , but i want to change it to just October 6
''''
datepart("m","d" , mydatevariable)
'''''
....doesnt work.
Formatting Date Incorrect Code
I have two dynamic listboxes.One is a date and needs formatting.I am using DWMX and therefore used the format function within the dynamic listbox wizard.When I run the page the listbox without formatting is ok, but the date listbox returns the following:
Microsoft VBScript runtime error '800a000d'. Type Mismatch 'DoDateTime' /admincontacts.asp, line 189
Line 189 is the following:
<option value="<%=(rsAdmin.Fields.Item("Date_Added").Value)%>" <%If (Not isNull(DoDateTime((rsAdmin.Fields.Item("Date_Added").Value), 1, 4105))) Then If (CStr(rsAdmin.Fields.Item("Date_Added").Value) = CStr(DoDateTime((rsAdmin.Fields.Item("Date_Added").Value), 1, 4105))) Then Response.Write("SELECTED") : Response.Write("")%> ><%=(rsAdmin.Fields.Item("Date_Added").Value)%></option>
Formatting Date Field From Access Database
I am pulling legislation information and expiry dates from an access database and posting to the web. The expiry dates in access are formatted as Month Day, Year (EG.. January 1, 2006) But when they are pulled from the database to the web, they come out as 01/01/06. I know that the format we have in access is simply a mask, however we require that format be carried through.
This is likely a simple solution, however I am new to ASP and can't seem to locate any information on this. I have searched the forum for related info on this but can't find anything that relates to my specific situation.
Here's the code we are using so far...
Code:
<%
Do While NOT Recordset.Eof 'i.e. carry on looping through while there are records
Response.write "<tr><td>"'open row and first cell
Response.write Recordset("Legislation")
Response.write "</td>"'close first cell
Response.write "<td>"'open second cell
Response.write Recordset("Repealed")
Response.write " "
Response.write Recordset("Expiry_Date")
Response.write "</td></tr>" 'close row
Recordset.MoveNext 'move on to the next record
Loop
%>
I have also found and implemented the following code:
Code:
dt=recordset("Expiry_date")
dt=Month(dt)&"/"&day(dt)&"/"&year(dt)
response.write(dt)
This lets me change the positions of the numbers, but I can't figure out how to make it display the full month name and full year.
How To Check The Date Difference Between The Current Date And The Booking Date?
I am developing a simple booking system where I had a booking date. The problem is I want to make sure that the user must book 3 days in advanced for certain room.
I have tried to use DateDiff but it seems doesn't work. Actually i just 1 to make sure that the user must book 3 days in advanced from the current date. I am wondering whether there is anything goes wrong in my datediff function. Code:
XML Formatting
I’m having an issue saving/reading an xml file.The source of this file is a the parameter of an object. Through the UI the user can change the value (xml string) of this parameter.
The problem is that the parameter needs the xml with > , < , and " instead of the > , < , " chars. However when I save it, the xml dom and even the fso save it with the actual xml chars. Other than a literal search, is there an easy way to convert the file to have the special chars?
ASP Formatting
Im looking for an online site that I can format or tidy ASP pages. If any one also knows of a software application that can format asp /html pages id be greatfull of that link too.
View Replies View RelatedTag And Formatting
I'm having users enter a message into a textarea, but I'm having problems with the formatting. How do I add " " characters where they have pressed enter?
This is being entered into a MySQL database, so I have already replaced the ' with '.
Select Statement Comparing Date() & Date Field Of Database
i'm new here and i'd like to ask if there's someone who knows how to compare date() function and date from database with date/time type inside select statement so i don't have to do if..then..else
View Replies View RelatedFormatting Variables
I am requesting a variable for the users' network username:
<%=Request.ServerVariables("LOGON_USER")%>
This returns the following:
NETWORKJ.Bloggs
Instead I would like it to return J.Bloggs on it's own with out the "NETWORK" bit so basically I am saying how do I cut out the first 8 characters of a variable.
Report Formatting
I have users typing in information into a text box. Sometimes this information can be lengthy and contain simple formatting such as spacess between lines and line numbering. For example:
1. List item number one
2. List item number two
I then have a report page that prints out this information. Unfortunately, the line spacing doesn't show up in the report. It's just all jumbled together. I'm just using <%= Notes %> to show the db field. Is there a way that I can show the formatting that was originally entered or do I need to use some kind of word processor like I am using to type this post?