three records into three table cells and then starting a new row for the next three records.(I've used While not EOF and MoveNext for writing each new record to a new row
I'm trying to perform a loop to display the contents of my DB, the only issue is that I would only like to display 10 results maximum this is relatively easy but what happens if there are less than 10 results in the DB. If I was going to do a :
Do Until objRS.EOF
Then it would display the full records, likewise if i put a counter on the loop then it will run into errors if I have less records than the count.
I have data base which I ctreated for it a Query to display every Username have same LastName.so this is what I did.I created Query to display to me every Username which have same Lastname For example lastname "Admin"
message for Admin's : why I can't add images.
so I got
Query Table : display all the the username which have the lastname Admin.so how can I display the records from the Query to my ASP page ?
I have a page displaying records in a table across but there are too many records to display and they run off the page, SO I thought I could show five columns with an unlimited number of rows. I'm stuck though. I've never done that before. I don't know where to start. I don't need paging as I can display all records on one page, keeping it simple. Here's my recordset:
<%set rsAll=objConn.execute("select * from qyProd where catalogid>0 order by designer_name")%> ...
Now What i am trying to do is , when the first time is student is login,he wil be shown a random record from the question and his answered wil be stored in the Ans field of the student table with column separeated.
The he will be redirected to the same page with one new question.This question should not be in the Ans Field, and must be randomly generated.I am using this code.But this not working. Code:
i am inner joing two tables customer and program. if i use select distinct i still get duplicate records displayed. how can i display distinct records for a customer by cust_no but still pull fields from program.
my customer and program table are joined by the cust_no field but in the program table the customer may have 10 different programs.
I tried "Select DISTINCT customer.cust_no ,customer.lastname, customer.firstname, program.season inner join program on customer.cust_no = program.cust_no"
i have a database with 60 records. I display all of them into a single column. What i want to do is to display the records in a table with 2 columns, the half of them into the first left column and the rest 30 to the right column.
I used the RecordCount to count all my records but how will i count the half of them and when the half is reached i will change the column and go to the right one?
Basically, what i want to do is select all records that match a value (1 for instance) in a feild(userID), then Display Only 3 in its own column on a table row on the page, then create another row and display the next 3 records in the same format from the same select query.
i think its got to be somehow possible with a For statement, but i cant think what.
I'm trying to display records from a table in a sql database.The problem is, every month a new table is created, so I don't know what the name of that table is going to be. It there a way that I can make sure the sql only reads from the latest created table?
I have all the text for all pages and sub pages in the database, also news, events you name it everything is dynamically driven.
Now I have come to the sitemap page, and thinking about how to go about displaying all of the pages.
Can anyone give me some ideas of a way in doing this. How would you approach this task. Obviously this needs to cater for new pages being added by the client when he or she decides to add them.
I have created an asp page that contains a datagrid.This reads a sql table and the ID column is bound to the first column of the datagrid. This is also a buttoncolumn.What I would like to achieve is on click of this column. Retain the value say in a cache (any other method welcome). Then open a different asp page and display the entire record in the relevant text boxes on the new page.
i want records displayed on one side of the page and the other side i have a form where users enter data using the list that they have. i am able to list the records after or before the form but not to the side of it. how do i do that.
I ahve a page which displays all the fields in my database but I want to be able to set the amount of records the web page displays, with a next button to go the next 10 or so records.
On our site we have option where users can add coments to articles. Lately some people have been misbehaving. I wish to add a field in .mdb file and call it "approved".
If the field contains "1" then it's ok to show the message (or a checkbox field), if the field has nothing in it comment will not be shown. How do I implement this into below code. I wish to leave posting as is, just not showing not yet approved comments.
This is the code of the page that should display a column of records (categories of my blog), next to the number of articles contained in each category. Code:
I need to build a asp page where it would serve as a data entry record page as well as display page for records saved. This page should also allow editing of records that has been saved. e.g.
SAVEBUTTON SS# EntryBox Name EntryBox Date EntryBox Revenue Generated EntryBox
The process of the first part of saving record is fine. However, the second part of displaying all the records that has been saved including the current record saved is where I am having problems.
i have a problem with my asp code...when i run a query, i insert the results on a temporary table...everything works fine except when i try to load the result page, it doesnt not display the recordset...
i need to press F5 always so that the page will be refreshed to show all records in the table.. how can I retrieved all inserted records in the temporary table without reloading the page?? below is my result page... Code:
I'm trying to count all the records in a table [for which I'm using count()]and display a number for each record. Ofcourse the number is not being pulled from the DB. So my doubt is when we display all the records of the DB can we just assign 1,2,3.... to each record that is being displayed? Code:
I am rewriting from scratch some code done by previous programmer on a glossary for our website. I have a database with three fields, ID, Term, Definition and a table called glossary. I need to be able to display everything to the *same* ASP page.
I have already successfully created the db connection and the records display according to the SQL statement, i.e. where Term like 'a%'.
What I would like to do is to display each letter of the alphabet dynamically from the Term field as a hyperlink that will display the terms beginning with that letter, i.e.
A B C D .... Z
The terms would be displayed as hyperlinks and when clicked will display that term and the definition. If A were clicked: Code:
I Have searched the forum but have no solution to this problem.
I want to display my records in a random order. I loop through my records so I don't know how many records will be displayed. I dont want to count the records and then use the TOP statement. I'm looking for a better solution.
Set rs = Server.CreateObject("ADODB.Recordset") rs.Open SELECT test FROM testTable WHERE testId = 1, objConn Do While Not rs.EOF Response.Write "<b>" & rs("test") & "</b>" <- I want theese records to be displayed in random order rs.MoveNext Loop
I have an access product inventory DB which has a Last_modified field associated with each product. I need an ASP function that will display all records that have been added within the previous week. Aka, SELECT * FROM TBLINVENTORY WHERE .....
The format of the date and time stored is like this: 18/02/2004 6:15:55 PM ...
I have a table with a number of 'advertisements', and each ad specifies a page display location (#1 - #9). I would like to query for all ads, but display them only where they have their location (see image above). I currently have 9 different SQL queries, one for each location:
"SELECT * FROM tb_ads WHERE f_adlocation = 1
I would like to have one query, and at location 1, simply say: "If f_adlocation = 1, then display here. If there is more than one, then repeat as necessary". Here is what my database looks like: I have attached sample data as a .txt file.
I'm trying to display records from an MS Access DB (*.mdb) in an ASP page (table).. I don't want to display all the records though, I just want to display the total of these records..i.e in my table I would like to show how many calls someone has closed this year..(number)
Joe Bloggs ---> 100 Closed
Is this possible? I was thinking that I need to write an ADO that includes COUNT but I'm not too sure how to write this.. Here's what I have so far: Code:
The problem concerns 2 tables, cart_products and cart_shoppingcart.
Cart_products contains all the product data (eg, prices, product's key name, etc), but most importantly, it contains the quantity of stock (prod_quantity) for each item.
cart_shoppingcart contains all of the user's items in their shoppingcart, including those that are part of an (customer) order; these have the order_number to differentiate from those that aren't in any order (their Order_number is 'no_order', the others have the order number).
Now, what I want to do is this:
For every item in the order (ie, every entry in cart_shoppingcart that matches the username and order number), take the quantity (x) the customer is ordering, then take the quantity of stock remaining (y), then subtract x from y to create the new stock level (z) and update the appropriate record in cart_products with z (all this with SQl preferably).
I was thinking of using a Do while loop, but realised that it wouldn't work as I'd have to use several SQL statements and then I'd run into a problem the minute ASP reads "objrec.movenext".
