Execute Update Query

wat are the different ways i could execute this update query. Code:

sql="Update Employee Set name='"& name&"', age="& age &" location='"& loc &"'
Conn.Execute sql

the sql statement shows evrythings correct. but when i execute the update query...it shows syntax error in UPDATE statment.

View Replies


ADVERTISEMENT

Cannot Execute UPDATE On Access Database

I tried at least 10 different solutions for my problems and I stuck this time. The problem is I got this:

Technical Information (for support personnel)

Error Type:
Microsoft JET Database Engine (0x80040E14)
Syntax error in UPDATE statement.
/webpage/Save.asp, line 45


Browser Type:
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022)

Page: Code:

View Replies View Related

Time Taken To Execute Query

Using ASP, I would like to write down to the HTML the time taken to execute a query. I am trying to optimize my SQL queries in the ASP page. So I want to determine if my SQL query is optimal or not. So how can I determine how much time it took to execute the query and return the results.
For example, something like: It took 5 seconds.

View Replies View Related

Execute 2 Query In One Connection

I tried to run 2 queries in single connection. But it doesnt work to the second query
page will return an error but execute the frist query only. How can i solve this problem.
I'm using Microsoft Access 2000. Here are the code an error that return

Dim objConn, strSQL1, strSQL2
Set objConn = Server.CreateObject("ADODB.Connection")
objConn.Open "DSN=egbit_dev;"

strSQL1 = "Update ADM_USERTAB Set USER_PWD = '" & new_pwd & "' where USER_ID = '" & userid & "'"
set rsUpdate_Pwd = objConn.Execute(strSQL1)

strSQL2 = "Update EGBIT_PWD_STATUS Set password_status = 'change' Where user_id = '" & userid & "'"
set rsstatus = objConn.Execute(strSQL2)

error :
Microsoft OLE DB Provider for ODBC Drivers (0x80040E10)
[Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 1.

( it refering to line that execute set rsstatus = objConn.Execute(strSQL2) )

View Replies View Related

Execute An Access Query

How can you use ASP code to execute an Access query. I want to run the query to then display updated data on the webpage.

View Replies View Related

Error-checking And Query-results After Execute

After commands like:

tmpDBconn.Execute("DELETE * FROM mytable WHERE rc_id = 10" )
How do I check for errors?
Is there a way to check the results?

OR:

Set rsCatCount = tmpDBconn.Execute("SELECT COUNT(*) FROM cat WHERE key_id = 10 AND cat_id = 6")

How do I get the count? Do I use rsCatCount(0)?

View Replies View Related

Using Update Query

I am doing a bmw tracking project for school using asp and access2000.
on my search.asp page, I can search for a particular bmw and order it if
i want. It works fine when i do select query to get data. But when I try
to order a bmw(using update query), it gives me this message error:
Error Type:
Microsoft JET Database Engine (0x80004005)
Operation must use an updateable query.
/bmw/search.asp, line 257

I have gone in to set IIS permission status to both read/write and
change everything that seemed obvious. but i still get this same error
message.

View Replies View Related

SQL Update Query On DB

what changes do i have to make this query work in an SQL query? This is the access query:

UPDATE tblLocation SET tblLocation.fldLocationDesc = "DU" & Right([tblLocation]![fldLocationDesc],Len([tblLocation]![fldLocationDesc])-2)
WHERE (((tblLocation.fldLocationDesc) Like "EI*"));

what i have is a location that has a lenght of 5 like EI001 and I want to change the EI to DU.

View Replies View Related

Update Query

How do I update a record if I want to loop through the records then update the current record in the loop. Flow :

rs.EXECUTE("Select * from Tbl Order By Ord;")

'update current recors in loop record

rs.movenext
loop .

View Replies View Related

Error On Update Query

I need help on this error that occured on one of the pages. fuunny thing that its happen in localhost and not in the web server. below is the code and the highlight of where error occured.The error mentioned in the page is :

Microsoft JET Database Engine (0x80004005)
Operation must use an updateable query.

/shop/confirmation21.asp, line 245 . can anyone kind enuff to let me know whats it about?

Code:

View Replies View Related

How To Create Or Update A ACCESS Query From Asp

I'm using odbc and Classic ASP and I want to read the sql content of a query in an access database. ANyone have any clues?

View Replies View Related

SQL Update Query Not Working Correctly

I am currently working on a small website which gives an up to date current count on how many people are available are certain time slots for different areas, this is run of a Microsoft Access Database Backend.

My index script will display all areas and times and then display a link to a form which deducts 1 from the current count. Code:

View Replies View Related

Update Query Works In Access, Not In ASP

I have the following query:

Update properties set Last_Change=#8-Mar-2006# Where properties.fdref='h3c000';

which works fine when I run it on my desktop under MS Access, but when I run it as an ASP page, I get the following error message:

[Microsoft][ODBC Microsoft Access Driver] Too few parameters. Expected 1.

I am using the same database bot online and offline so field names etc are exactly the same.

View Replies View Related

E-commerce - Checkbox - Pricing Update - Query

I want to change the existing code of our company e-commerce site so that the pull down menues are now checkboxes (will make life easier for sales to work with).

The pull down menu's must automatically submit, as the pricing changes with each selection.

Is there a way of auto submiting when a checkbox is ticked / unticked? Have tried using the "onChange=" that I nicked from the pull down... Code:

View Replies View Related

Update/Query Problem - ASP Reads In All Integers As 0

I have developed this script that is meant to take in a value from a database record add one to it and post the new number in the record. It works ok but it always seems to read all database records as 0 never as thier true number (i have tried it set to 1,2,3 etc)

Code:

View Replies View Related

Running Update Query ODBC Drivers Error

I am getting this error when trying to run an Update query, Microsoft OLE DB Provider for ODBC Drivers error '80040e14' Can anyone explain to me what this means and where I'm going wrong.

View Replies View Related

How To Tie RegID To Form To Update (batch Update)

Okay there is an unique EventRegID for every registration. When people first register they get pre-registered. Then an admin comes in and confirms or wait list them (based on whatever requirements). My question is how can I tie the EventRegID to a form with multipule ID's so they can batch confirm or wait list the PreReg list? Code:

View Replies View Related

Need To Convert This Sql Query For Access To Identical Sql Query For Sql 2005..

My code retrieves a username and a password from a form. Then this information is compared to some usernames and passwords that are stored in a database. The important thing here is that the comparison must be case sensitive meaning that "passWord" is not the same thing as "password"

I have this code, working fine in access 2003

SQL = "SELECT * FROM users WHERE StrComp(username_column,'" & entered_username_in_form & "',0) = 0 AND StrComp(password_column,'" & entered_password_in_form & "',0) = 0"

but get the following error when I run it against my sql 2005 database.

[Microsoft][SQL Native Client][SQL Server]'StrComp' is not a recognized built-in function name.

I don't know the corresponding t-sql for the query.

View Replies View Related

Query A DB - Pass The Query To Next Page

I am running a querry on an access database and have set the number of records/page displayed at 20. if there are more than 20 records returned, then 1st page will show the first 20, the next page will show next 20 and so on....

The trouble:

the count of total records displayed is correct and the first page is displayed correctly. But when i click on *Next* to go to the next page, all the records of the database get displayed (not the 2nd page of records from the query).

View Replies View Related

Query Access With Multiple Query

I am using ASP/MS ACCESS to see how I can query the same database, via 2 formfields.

{name: - search}Textfield 1: - Search by Category
AND/OR By
{name: - searchT}Textfield 2: - Location

Currently,

strSearchwords = Trim(Request.QueryString("search")); where "search" is the name of Textfield1

Which is fine, but how can I set it so that on Submit, the string from search, and searchT are somehow joined together into one string?

View Replies View Related

Execute A Sp

WEll I see that this issue is not yet solved ...
So here's some more beef...
There is an update the first part of the query that takes ~50 seconds
and the connection gets cut off at 30 sec sharp. Logical as the default value us 30 sec.
question :Does anyone know how to increase that value? I can't do it in the udl , it reverts back to nothing.
Option:
[1]I would/could also optimize that update using a hint to fasten it
[2] Or try to execute the proc without using the dsn?

View Replies View Related

Execute Every 5 Min

Using ASP 3 on an ISP account (I don't have access to the root of the
server). I have a page that does some intake processing and I'd like to have
it run every 5 minutes. Right now, the only way I can see to do this is to
have a client task that wakes up every 5 minutes and opens that page.Is
there a better way?

View Replies View Related

Execute SQL

how can i setup a connection to run the sql statement? how can i embedded it in the script? Code:

View Replies View Related

Execute EXE With An ASP

I recently moved an app over to IIS 6 from IIS 5. Everything works great! I use ASPExecute to run an .exe - but it doesn't fire. It just sits in the process window. Doesn't do anything. Is IWAM, or IUSR or both required to run it?

View Replies View Related

Execute DLL In ASP

I need to use a VB6 dll like an ActiveX in ASP page. This dll use other .exe that is configured en DCOMCNFG and this dll is configured too in the same environment (DCOMCNFG) like a DllSurrogate with an specific user administrator.

I don't know how to configure this dll & IIS to it works with Anonymous authentication. I need to do this because is a development that it works in an Internet environtment and I can't assign a administration user in IIS 5 to the anonymous user.

View Replies View Related

Server.execute ?

Can server.execute provide a return value? How? ie.

dim test
test = server.execute("page2.asp")

What code in page2.asp will produce something in test?

View Replies View Related

Global.asa Not Execute

my global.asa file doesn't seem to be executing in IIS and i don't know how to make them run. Any ideas how to execute the global.asa file in IIS 5.1 ,

View Replies View Related

Code Execute First

<%Response.Write "Hello"%>
<html>
<head>
<javascript language="javascript">
alert("First");
</script>
</head>
<body bgcolor="#FFFFFF">
<h1>Testing</h1>
</body>

Which code execute first.

View Replies View Related

Server.Execute() &

In Page1.asp I am calling Server.Execute("Page2.asp"). Before calling
Server.Execute(), I set an application variable to a value that it is
important for me to know that it doesn't get accessed by another ASP page
before I call Application.unlock in Page2.asp, that is why I use
Application.lock.
According to the documentation, Application.lock gets automatically unlocked
when the ASP page terminate, I want to confirm that calling Server.Execute()
doesn't automatically unlock the application, i.e that Page2.asp will start
executing when the application is still locked.

View Replies View Related

Asp Fails To Execute

after publishing a web to iis, asp pages based on a
database fail to work. the browzer starts loading such page
and never does- at some point the status bar stops and the
page never loads without displaying any errors. the browzer
shows that it is busy all the time.

View Replies View Related

Dropdown To Execute

what If i wanted to have a dropdown that executed a query based off the selection. so i have a dropdown on page and when they make there selection it queries other data with out submit?

View Replies View Related

Execute Problem

INSERT INTO results(id, book, book_spoke, recordType, book_title, chap, chapter, chapter_spoke, vers, verse, verse_spoke, text_data) VALUES (, , , '', '', , , , , , , '')
Microsoft VBScript runtime error '800a01b6'

Object doesn't support this property or method: 'execute'

/kjvresp.asp, line 280

View Replies View Related

Cmd.execute Select SQL?

What is the proper format for my SQL str using command.execute? Even though
I know I have matching data in my table, I keep coming up with a
..RecordCount of -1. What am I doing wrong? Code:

View Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved