I'm getting this issue "Cannot use a leading. to exit above the top directory" when i access in my server, it is working fine in my local. We are using RewriterRule in web.config file. I'm using ASP .net 2.0, IIS 6.0.
View RepliesIs it possible to use "exit" or equivalent in a condition in ASP as shown in the example below:
if count >=10 then
exit
else
rest of code
I just want the code to stop executing once a condition is met .
how do you exit a while statement? i've tried
exit
exit loop
exit while
what am i missing? or is it not possible?
I am working on a section of a site that logs the persons with timestamps. There needs to be a small asp script that runs when the page is loaded and another when the user leaves the page. How can I run the script when the users leaves the page?
View Replies View Relatedis there a concept of return exit To terminate program execution ?
View Replies View RelatedWithin my site is a section for visitors to login. Once they have logged in they are directed to a page which uses frames.
existing code is below:
<frame name="leftFrame" src="computer_store_index.asp" scrolling="auto">
<frame name="mainFrame" src="computer_store.asp" scrolling="auto">
</frameset>
<noframes><body>
</body></noframes>
</html>
The problem is when the visitor logs out they are directed back to the login page. The login page and all subsequent pages which the visitor may click on within the site also displays the frames. Is there anyway to close the frames?
Can anyone give me a simply and short paragraph answer to the quest : How does ASP close/exit an application?
View Replies View RelatedI am trying to format a texbox when a user exits it. In Visual Basic you could put the following in the Exit property of the textbox:
textbox1 = Format(textbox1, "Currency")
Is this possible in ASP/VbScript?.show code in your reply, especially where to put this code in the asp page?
I need to offer a questionaire to approximately every 10th user of my website when then are leaving.
My first thoughts were to use an application variable to determine the number of users but this falls over because it would not instantly release the variable when the user left the site.
I have written a script to update user information in the Active Directory using ADSI. Here is part of it:
Set User = GetObject("LDAP://<GUID=" & GUID & ">")
User.Department = DepartmentName
User.SetInfo
Set User = Nothing
This works fine unless DepartmentName is an empty string ("").
Then I get error 0x8007200B: "The attribute syntax specified to the directory service is invalid."
This happens with all the attributes I have tried, including TelephoneNumber
.
Do I need to delete the value of the attribute instead of setting it to an empty string? If so, how do I do it?
im brand new to ASP and all but at school they want a webpage and they wont support PHP which is what i know so i need to figure out how to show everything under a directory then if sub folders have them link to that folder
View Replies View RelatedI would like to do something like this:
<!--#include file="C:dbutilsdbConfig.asp"-->
Where the directory C:dbutils is OUTSIDE of the web directory and not
accessible by a client web browser.
The reason I would like to do this is in case somehow ASP processing
gets turned off in IIS. Since "dbConfig.asp" contains a
username/password for the database, I don't want this file to somehow
get sent back to a client browser as plain text.
Two questions:
1) is it possible to use an include file that is outside of the web
directory?
2) is there even any way that ASP processing can be turned off?
perhaps not explicitly, but maybe via malicious code or virus?
Does anyone know if it's possible to convert files to .pdf format through ASP? or better yet, does anyone know of a utility that can take a directory of word documents and form one pdf file with the contents?
View Replies View RelatedI've been playing with the script at http://www.asp101.com/samples/dir_list.asp
What I want to know is if the script can be changed to 'read' from the dir it 'loads' from..
So I can just put the script is heaps of folders without having to edit the 'strPath' for each.
I have an Intranet site sitting on an Windows XP server, which has IIS 6.0 installed. This Intranet site contains a virtual directory (VD), which sits on a second server and has Windows 2000 installed.
To test how a virtual directory would work for this particular Intranet site, I had previously set up the VD on the web server. Everything worked well...no errors.
Once testing was complete and the location of the VD changed to the second server, I have been receiving the following error:
Microsoft VBScript runtime error '800a004c'
Path not found
I understand what this error is saying, but I was wondering if anyone knows of any problems between IIS 6 being on a XP server and the VD on a 2000 server and any possible implications.
Is it possible to read the all filenames from a directory? Basically I want to grab all the filenames from a directory and make a flat file with all the values in it.
View Replies View RelatedI'm trying to create my own browsing window for a directory on my webserver. I can access the root the directory and the first sub-directory but anything lower than that I get "path not found". I'm almost sure the problem is attaching the selected directories names on to the objFSO.GetFolder line.
I used the Mid function to get my selected directories. I can't figure out how to add the selected directories to the objFSO.GetFolder line. Code:
I'm trying to protect a directory from users not logged in.
Let say i'm trying to protect a direcory called files.
I only want the user to acces the files when they've logged in.
http://www.sitename.com/files/filename.doc
Even though they know the name and path i want to prevent people from downloading the files.
I don't want the user to be able to send out the link to another friend without logging in.
Is this possible i'm using a wiindows server.
I am using CDONTS with winnt and all the sent emails are sitting in the QUEUE directory in c:inetputmailroot.
View Replies View RelatedI'm trying to connect to the active directory using asp. I'm having problems with logging in, what happens is the username accepted is not the user logon name but the displayname is accpeted heres the code:
View Replies View RelatedCould anyone show me a sample, snippet, code chunk ... etc of how I can get ASP to find the Active Directory username based on a supplied email address?
For example: I want ASP to query active directory and retrieve the AD username for where user email address = 'whatever@whatever.com'
Not sure how to address this, but...
Obviously in the SEO world, this:
http://domain.com/my-article-name
Is better than:
http://domain.com/article.asp?articleid=67
Here's the challenge though: How do you get your dynamic pages to appear as a directory rather than an asp page with a querystring? I'm fairly certain that there is a workaround to this to be able to have one dynamic asp script that appears in your address bar as a directory.
Is there a way in asp to create a new default web site within IIS
I am setting a content managament system and want to create a new default web site during on of the processes.
So for example if people create a new site within the admin section and call it Jacinto this will create a new virtual directory called Jacinto.
This would then be accessed at http://localhost/jacinto
Here are a couple of links that describe how to create a virtual directory programmatically on IIS.
http://support.microsoft.com/defaul...kb;EN-US;188954
http://www.vbrad.com/pf.asp?p=sourc...ate_iis_dir.htm
I haven't had a close look at the code yet but it's not in asp/vbscript
Has anybody done it in pure asp.I would like to do it on a site hosted by a third party and I am unable to install any dll's or exe's on the machine because it is a shared webserver.Both .NET and Non .NET would be good
I have a virtual directory set up and it's fine. Now what I want to do is write files into them. When I try to do that it gives me a "path not found" error.How can I do this? Is this even possible?
View Replies View RelatedI want to write a web hosting application. But how to create a IIS virtual
directory programmatically in ASP page?
Is there a way to create directories using vb or jscript in IIS to a unix machine? I want to have the aility to upload files through my Win2k Web Server, and have those files stored on my Mac OS X Server under new directories based on date and Upload ID's from the Db.
View Replies View RelatedI would like to have PHP for windows run in another directory than
c:inetpubwwwroot. I have tride changeing parameters in php.ini in my
c:php directory. But nothing changes. When I run the phpinfo() I always get
Configuration File (php.ini) Path as c:windows. But I do not have the
php.ini file there. Is there something I am doing wrong or is it a bug.
I tried renameing the php.ini file and reseting the IIS and believe it or
not my scripts still work in c:inetpubwwwroot.
Is it possible to keep my database file (access db) in local pc (C drive)? I have created all the page with asp, the reason is that I cannot set the server path to write on the database if it's save under server.
I am only running all this file in one pc. how can I change below statement if I want the db file save in the local c:...Tks
<%Dim DBPath, connstring, conn
DBPath = "score.mdb"
connstring = "PROVIDER=Microsoft.Jet.OLEDB.4.0; DATA SOURCE=" & server.mappath(DBPath) & ";" & "Jet OLEDBatabase Password=welcome"
Set conn = Server.CreateObject("ADODB.Connection")
conn.Open connstring
%>
I'm trying to find out the entire path for the directory on the web server that I use for FTP'ing.
I had an ASP script which did it for me once before but I've lost it. Does anyone know how to retrieve the full path name?
I would like to write an ASP ap that asks for username/password and
validates against the active directory. Any ideas how/where I can do this?
In addition, once these people are logged in I want to be able to send the
to exchange's OWA and just be logged in, no second login/password.
At work I was asked to add a link to a directory listing page. This page is with the link is located behind a secure page requiring a username and password. When I added the link I also went to iis and checked to make this directory have directory browsing listing checked.
Everything is fine however now this directory is open if you just post the complete link to it in the URL bypassing the login page. Is this a nornal behavoir and is their anything that can be done to make it prevent it to be opened?
Does anyone know any good tutorials / websites that show directory structure.
Ie like windows explorer but on the web in asp.
so that i can click a file and edit, rename, move.. so on and soforth