How To Determine If Link Is Directory Or File?
Currently I am developping a internet "directory browser"
My page 'default.asp' has following entries:
CurrentPATH = Request("MyLink")
Set oFSO = CreateObject("Scripting.FileSystemObject")
Set oFolder = oFSO.GetFolder(CurrentPATH)
Set oFolderContents = oFolder.Files
this works fine with 'default.asp?MyPath', where "MyPath" stands for i.e.
c: emp
but NOT with 'default.asp?MyFile', where MyFile stands for i.e.
c: empfile.txt
Is there a way to determine if the link contains a file or a path? Of course
you can check for a dot (after dot, normaly it is an extension, thus a
file), but I want to have it possible also to have dots in my directories...
Anybody?
View Replies
ADVERTISEMENT
does any one here know of a good way to to determine whether or not a
given path is a directory (e.g., "c:mydir") or a file (e.g., "c:mydir
myfile.txt")?
i started attacking this problem by using filesystemobject to check
whether or not a directory existed for the path. if so, it was a
directory path. if not, i checked to see if a file existed for it. if
so, it was a file path. Code:
View Replies
View Related
Could you suggest me some link directory script in ASP? Free or commercial; with hit counter, reviews and ratings.
I have browsed through HotScripts and ASPIN and find aspWebLinks 2.0 which is free and good solution.
View Replies
View Related
I need to figure out if this file is over a day (or however many hours) and if it is, i need to delete it. If its not i redirect the user to it
Code:
If (fs.FileExists(workFile))=true Then
set f=fs.GetFile(workFile)
If (f.DateLastModified > Date-1)
Response.Redirect "/" & tFileName & "/" & reqString & ".html"
Else
f.Delete
End If
set f=nothing
End If
obviosuly the date-1 is wrong, i can't fid the appropriate syntax to save my life.
View Replies
View Related
I am uploading some banners to my server on an application, I am using ASPUpload.
Everything works fine, I am using the component properties: File.ImageType, File.ImageWidth, and File.ImageHeight.
My problem is that this properties only support file types:GIF, JPEG, BMP and PNG.
I am using also Flash banners on the site (SWF)...
How can I determine the banner dimensions (width and height in pixels) after uploading the .swf file?
View Replies
View Related
I am trying to create a link that takes a record ID and opens up a PDF file that is associated with the record ID in the database. The following code works
Response.Write "<a href=""file.asp?ID=" & rs("ID") & """>"
Response.Write rs("File Name") & "</a></td><td>"
I'm trying to rework this code to work a little more easier with Dreamweaver. I would like it to look a little more like this:
"<a href=""file.asp?ID=" & <%=(rsNews.Fields.Item("ID").Value)%> & """>" <%=(rsNews.Fields.Item("File Name").Value) & %>" </a>
I'm receiving a syntax error when I try and run it.
View Replies
View Related
I am creating a text file on the server which once created I need to then copy to another directory on the network.
View Replies
View Related
I'm coding a page where you can download a lot of different files( 100-1000) but I don't want to code each file(linking and all) it would take weeks to do that. I tried with a database and asp code rding the databse but it not saving a lot of time since I got to complete the databse.
I wanna know if we can code with asp something to automaticly read each file and list them in html so I dont have to code 1000 x the samee thing.
View Replies
View Related
Can i know how to link a hotspot to asp file? i'm using frame. i have leftframe and mainframe.
the left frame is fixed. when i click on the hot spot on the left frame pic, i wan it to link to register.asp but target on the main frame but it will have a dialog box prompt
File downloading
u are downloading from
register.asp from C://.........
do u want to
open save cancel info
View Replies
View Related
I have uploaded files to a SQL Server DB using Pure ASP Upload, and that was a snap, but what I would like to do is create a link in my recordset from the file name in the database to the actual file that resides in a folder in the database so that when a user clicks on the link, the file will open.
I've done this successfully using another program but it used an ACCESS DB and I want to use it with SQL Server. Plus the ACCESS DB used a field with a data type of Binary.
View Replies
View Related
I want to know is it possible to upload file into specific directory?
Actually I already find how to upload a file, but I can not choose/browse where I want to store/save the file.
View Replies
View Related
Is it possible to search a specific directory for the most recent file and list when it was modified.
View Replies
View Related
I am working on a book selling website using ASP with an Access DB.
Basically i would like to have an image of each book in the DB to be displayed upon request in the website. So I guess what i would really like to know is
1. Can i store .jpg or .gif files in an Access DB?
2. Does it make sense to do this?
3. Would it be better to have some kind of pointer in the DB to a place in the file system where the image is stored? .......
View Replies
View Related
If I don't set a vritual directory for the new application on the IIS (simpley copy the new application to a parent virtual directory), the new application's Global.asa file won't work. Right?
View Replies
View Related
I have a folder with eight or ten files that can be displayed in a browser. I need to display the file with the latest creation date. I imagine there is some kind of ASP function that could like at the filename's date and pick the file that meets the criteria. How can I do this?
View Replies
View Related
Set fileSystem = Server.CreateObject( "Scripting.FileSystemObject" )
Set file = fileSystem.OpenTextFile( "config.xml", 1, False )
It's saying that 'config.xml' doesn't exist. How can I reference this file? It's in the same directory as the file with the above code. Do I need to build the path somehow?
View Replies
View Related
I used to have a little ASP file (classical ASP) that would show me the total file size used per directory. I didn't need it for many years and now that I do I seem to have lost it.
Does anyone have an classical ASP file/script that will loop through your filesystem and shows the total Mb's used per directory? I could write it myself I'm sure, but if someone has a script like this ready it would save me quite some time.
View Replies
View Related
is there a way in asp that you can prepend a file to the beginning of page you access in a directory? i'm not talking about the include statement because you have to put it in on everypage manually. i know you can do this in cold fusion, but i don't know how to do it in asp or if its even possible.
View Replies
View Related
Using ASP in a VBScript environment, how can I check the protection on a directory, or a
particular file?
View Replies
View Related
can i get an example of how to read values from a text file that will be used as links on my page. i'll have a .cvs file ala:
LINK ASP_PAGE
"click me1", "clickme1.asp"
"click me2", "clickme2.asp"
"click me3", "clickme3.asp"
i think i can figure out how to do the read, but need to know how to get it on the page where i need it.
View Replies
View Related
I'm trying to run each file in a directory to be put into an include file line
I can't get anything to work me. Code:
View Replies
View Related
The Include file '../main.asp' cannot contain '..' to indicate the parent
directory.
I think it is refering to the fact that I have a file called
communication.asp, and in that file there is a line:
<!-- #include file=../main.asp -->
This LINE should not contain '..' to indicate the parent directory
On the other hand, reading the message as it is written, we see that it
says: Code:
View Replies
View Related
I'm working on a document management app that saves scanned docs as PDF files in a local directory, then saves document metadata in an Internet-based SQL server.
The SQL server is then queried to retrieve document info and links are created that point to the files.
The code points to the proper local directory and file, but I can't get the browser to open the document in a target frame. If I open a test doc locally it works fine.
View Replies
View Related
I have a form mail script that sends an email and then writes to a text file using Server.CreateObject("Scripting.FileSystemObject").
The problem I am having is that the information needs to be saved in a Password Protected Directory. When I try to save the info it gives me a permission denied error.
I had my hosting company change the permission on the directory and the script was working ok but now it isn't.
Is there a way to pass the username and password in the script so I don't have to worry about the hosting company messing this up?
View Replies
View Related
I have 2 web servers both running win server 2003 with iis 6.0. On my
PROD server I have a virtual directory called CONV. It points to a
folder on the C drive of this PROD server.
On my TEST server, I defined a virtual directory called CONV. It points
to a share called prodservernameCONV. Note that the share name is
the same name as that of the virtual directory.
Using IIS on the TEST server, I can navigate to this CONV virtual
directory and via right mouse, click EXPLORE. I see all the content I
should but when I try to doubleclick on a file I get a message saying
"Security alert" - "your current security settings do not allow you to
perform system commands on this item".
I've tried everything I can think of on the security settings for the
physical folder on the PROD server. I extended EVERYONE from READ, etc.
to FULL CONTROL. I added the user called INTERACTIVE and gave it full
control. In short, I am stumped and guessing now.
Basically, I just want to avoid duplicating all the data files on my
PROD server over to my TEST server.
View Replies
View Related
Can I implement session without global.asa file in my root directory....and is there any good site for sessions tutorial.
View Replies
View Related
I have written a script to update user information in the Active Directory using ADSI. Here is part of it:
Set User = GetObject("LDAP://<GUID=" & GUID & ">")
User.Department = DepartmentName
User.SetInfo
Set User = Nothing
This works fine unless DepartmentName is an empty string ("").
Then I get error 0x8007200B: "The attribute syntax specified to the directory service is invalid."
This happens with all the attributes I have tried, including TelephoneNumber
.
Do I need to delete the value of the attribute instead of setting it to an empty string? If so, how do I do it?
View Replies
View Related
here is some background on the page I made. It's a calendar page with events listed. No database, just used id="" to display certain months depending on the option chosen from the jump down menu.
The question I have is this: I would like to display the current month's events when they land on the page. I used
<%
id=request.querystring("id")
%>
and created an <%elseif id="1" then%> and so on for each month. Is there a way can request the month and display that id? Thanks for you help. I have the code for the page if need be
View Replies
View Related
Is there a way to determine the actual width and height of a image file ?
I'm using aspsmartupload to upload the image, how can determine and save the
width and height value ?
seems that aspsmartupload doesn't have this property.
If so, is there any method to determine it in asp in the simpliest way? I
will prefer to maintain the aspsmartupload method.
View Replies
View Related
I have many servers which will be reghosted everyday with different OS
(Win2000, Win2003, WinXP...). How could I write the ASP code to get the
information of other servers' OS?
Let say the asp page is hosted on Server A, how can I check the OS version
of Server B and Server C?
View Replies
View Related
How do you determine if a given date is a weekday (Mon-Thurs) or weekend (Fri - Sun)? Is there a built in function?
View Replies
View Related
Somewhere in my program I ask users to provide their website URL. I would like to determine if the given website exists or not.How can I determine a website with given URL exists?
View Replies
View Related
I am creating an ASP page for members of my team to add and delete records from specified tables. This table is choose by the user and I am dynamically creating text boxes. I also wish to include the type of the attribute to assist the user.
<%
for s_intCounter=0 to objRs.Fields.Count -1
%><tr>
<td width="34%"><% objRs.Fields.Item(s_intCounter) %>: <input type="text" id = <% objRs.Fields.Item(s_intCounter) %> > </td>
<td width="66%">Type: <% INSERT ASP FOR RETRIVING TYPE</td>
</tr>
<%next%>
View Replies
View Related