I created a html form and its data is sent when the submit button is clicked. The files are: rcf.html this for the users to enter their data, rcf_add.asp this page is to show the users their data is recevied, and rcf_view.asp this page is the view all the data that is in the access database.
The problem I am running into is when the submit button is clicked on rcf.html page, it should take the users to the next page (rcf_add.asp) where saying "thank you..." but instead, the code of the rcf_add.asp is displayed. I am going to upload all of my files and if anyone can figure out why please please let me know! I've been trying for the past week.
I have a html form, and I like to know how to capture the values in the form after the user hit the submit button. How do I capture these values in an ASP page?
Basically, everything is written in ASP. Firstly, a user fills in an online (ASP) form, and then submits it to another ASP page (e.g. Send.asp). Now Send.asp retrieves all the form data and sends another HTML form via an e-mail. I then receive and open the HTML email(s). Now everything is going fine up until this point.
When I hit the submit button from the e-mail, it posts all the form data to another ASP page.
Now this is when things start to get a little weird.
Half the time when I submit the form via Outlook 2003 message, the other ASP page would load will all the form data intact. Every other time, the other ASP page would load will NO form data at all; just blank text boxes, textarea, checkboxes, etc ...
I've done a few experiment of my own in the hope of finding some answer. So far, I've only seen this happen to Outlook 2003 and not 2000 (we have a mixed between those 2 versions).
Also, it only happens to users in the same state as where the IIS server is located. For example, the server is located in state A, so any users with Outlook 2003 in State A will experience this problem half the time. Other users in State B, C, D, etc ... using Outlook 2003 does not experienc this problem. Because the link is a lot slower for our interstate users, I'm starting to think that maybe network speed has a part in this behaviour.
I'm using ASP and HTML for a form. I'm having a major issue with users copying from MS Word or Work Perfect into my text boxes. What I want to do is top this with either html, javascript, or asp.
How can I save form results as .txt or .html file ?Form contain also html tags <b>, <p align="center">...I want to alowe my users to online generate html or text files via WYSIWYG web editor.
I want visitors to be able to react on the website i'm making. I'm not an ASP-expert, but i've created a html contactform which sends it's data to a sendmail.asp-script. So far so good: i receive email.
What i don't like is that when the asp-script is executed a blank page is displayed and i would like to display a "Thank you-message" not in a new window but instead of the filled contactform. Again, i'm not an ASP-expert, but willing to learn.
Im looking for a way to preview/output html entered in a form a form in a new window. The idea is the user wanting to see what their html will look like before sending the actual email.
In a HTML form field, the user enters a long text. I need to search for an image tag. Then get the name of the image (*.gif or *.jpeg) to check the image library if the image already exists. If exists, cannot upload the image. Else, upload the image.
I'm working on an email message sent in HTML format. As the email reach the adressee the HTML is correctly visualizaed (I made sever tests with Outlook 2003).
The fact is that the code contains a <formthat should be submitted to an external ASP page. The <formtag naturally cointains a target=_blank and a proper action.
Anyway it semms to be impossible to make the form work. The submit does not work; it is evidently an Outlook permission matter...
I verified that sever other things such as <iframes and Javascript code do not work at all when an HTML is visualized in Outlook.
Is there a way, in your knowledge to go round the problem?
I have a problem with filling up an MS Access Database by using a HTML form. I created 3 files: a HTML form file, an ASP file that executes the command and a MS Access DB containing a table with the fields that I want to fill up. Code:
I created a web form in html, I need to create a server-side script using ASP and embed it into the html, so that when the user clicks submit, it sends(saves) the data from text boxes, drop-downs etc, to a text(.txt) file on the server. It needs to be in csv format so that they can create an excel file from it.
My company has recently started testing Win 2k3 servers to replace our current 2k versions. The problem I have is that our IT group sent out an email to all web developers stating that HTML forms would no longer be supported in 2k3 and all forms would have to be converted to asp pages.Since the form tag is in the html specs, I find this rather hard to believe.
I have created a form in HTML with no problems, but I can't find any tutorials on how to (or whether I even can) have the results of what the user inputted into the form directly to me. I would also like to be able to have the results stored in an Excel Spreadsheet as well. I've found tutorials on how to send to addresses inputted into the form, kind of like a 'Thanks for Participating' sort of thing and I've tried to modify it to get it to work for sending me messages, but I just can't get it to work.
I been trying to send a Html email with a form included. I tryed by including <form> and <input> as usual in Html code. What happen is that the email is send and the form are seen but the input button doesnt work right, in hotmail , msn, I mean its not active Any idea?
All of my previous web page work has been done with .html and Cold Fusion. My new host does not support cold fusion but does have ASP 3.0 and ASP.Net 1.1. They've told me that I have to use CDO.Sys for sending email. I've spent the past 3 days doing all the research I can find but most of the examples assume a basic knowledge of ASP (which I am severly lacking in).
I have a simple .html form (4 fields) that currently DOES get sent through email (although it is sent as plain text). I would like to be able to send an email that is formatted into html (allowing me to use tables, images, etc.
Here is what I have so far (I've commented out the "text" based part and am trying to send as an html email now).
I have downloaded and installed an ASP Calendar offered for free by Manohar Kamath from his website. I've modified it to accept two new fields (sStart_Time & sEnd_Time). I want to be able to have drop down selections for the time entry, but do not know how to accomplish this.
Please take a look and tell me if this can be done using the <% =Server.HTMLEncode(sStart_Time) %>"> value for this piece or if there is some other way to accomplish this, please let me know.
If I leave it as the following, it works OK, but I want to make it easier for people who are adding to the database: Code:
I have a form that is being sent over to an asp page. About 5% of the time, the form fields are blank when the ASP page is reading them. But when the user hit the submit button, they were not blank, because I have client-side validation that will not allow the submit to occur if any of the fields are blank. When this occurs, all the fields in the request.form object are blank?
I just recently created a html form and one of the fields required a date. I want to make it so it will insert the date when the form is being filled out. For example, if I fill out the form today I want today's date on it.
I am going to connect this form to a MS access database, the database also has a field "date". How would I like all these together? Also, I want to send a notice to a specific email whenever someone submits the form.
i have a database and the asp file. my database will have one table, a user table, with various fields like username, password, name...age.. all i need is the html code to make a simple form such as
Welcome to the add user page: PLease enter a username (input box) Please enter an email address (input box) finally a submit button.
i then want the variables to run a 'signup.asp' file which i have, and be placed into a database.
I originally believe this was a database issue untill I tried to run this using just pure forms.
Issue. I have a form (basic form) and at one of the steps.. the user inputs an article name (and in this case.. there is a set of doublequotes used in this name).
I used the name ( In "Search" of the three Ethical Reviews )
<input type="text" name="Article">
Now I filled in the rest of the data Including a large section with just paragraphs of text that includes quotations marks, slashes, etc etc.
I click the submit button which Transfers all this information into a review page. The review page is another asp page that merely drags all the info from the last page and displays it on the screen for re-editing. Example Code:
Is it possible to use ASP +/ VBScript to automatically fill in certain fields of an HTML form with data generated from what the user typed in another field?
For example, the user needs to input 24 consecutive weeks worth of forecast data. If everything is done manually, they'll have to type in a date for each of the week. I would like the form to automatically fill in the following 23 dates (each one week later than the previous field) after the user fill in the first week's date. How do I do that?
when the user clicks on the edit account_details link, a web-based form page opens with text fields like account_no, account_name, date, type etc.
the design i want to implement is when the user enters the account_no field on the form & goes to the next field, the remaining fields on the form should be auto populated with the respective data for that account_no from the Oracle database.
Next the user can edit any of the form fields & save it back to the db.
I have purchased a form processing script, which basically saves the data into a database, emails certain people's email addresses with the form results, and also sends an email to the user that filled in the form with a thank you email.
However, all the emails are being sent in plain text format. I would like to change this to HTML so I can make the results look nicer and also make the thank you email look nicer.
I have emailed the script developers, but have yet had a response from them, so i thought id put a post on here!
I have found the part of the coding that sends the Thank You email out to the user once they have filled in the form:
'/// Send Autoresponse if replyto<>"" and (autoresponse<>"" or sendcopy<>"") then if sendcopy<>"" then autoresponse=autoresponse & vbcrlf & vbcrlf & message call sendmail(replyto,mailadmin,formname,autoresponse) end if end if .......
in J-Script, I could do it by Eval() or about eight ways through the DOM. It seems crazy to me that if I can access the Attributes of a specific element directly by ID (thisTD.Attributes), I couldn't also access it by reference.
But I have been able to find NOTHING to indicate how this may be done. Obviously, my problem is not limited to a single attribute, or else I would have just typed them all out by now. Trouble is, there is a lot of logic that must be applied to the data before setting the attribute. Without being able to iterate or loop by reference, I will be typing for ages just to change some freaking classes.
i am trying harder to mix this 2 solutions... but without success... the below on seen to be grabing a template and replace the data with the values posted in a form Code:
I have a table having 3 columns. There is a checkbox for each line. I need to get those lines whose checkboxes are checked, and show those lines to another webpage. Is there any way to do that? My concern is that all information in the table are in <tb></tb> pairs without any name tag. Any idea?
I'm doing a content management system, whereby the user can enter the HTML code for a currency symbol, eg £ for £.y . when I bring this data backup, say they want to edit the settings, then my ASP/HTML page is rendering the HTML code, eg £, rather than showing the original value, eg £.
If for example I put a space between the '&' and the 'pound;', eg & pound; then this will cause me problems because the user will think that they have to a put a space in or they file it with the space, which means the HTML code won't work any more. Is there a way round this?
i need to include the html inside another html, though it might appear simple, the catch is this, my one html is in one server and my another html is in another server.I cannot read the html and stream it as it has images and their path gets changed when i do that.
More over i donot have any control over the html which i am going to include all i have is a url http:abcxx.htm whose content i want to show in another asp page. The technology is ASP (vbscript and javascript).
I´m having a problem using ASP Upload with an insert form..
If I use ENCTYPE="multipart/form-data" the all the parametres i might get with request.form don´t appear.. but i can upload the files.. Besides if I take away the ENCTYPE tag, i can´t upload but the INSERT INTO form works propertly
