If Statment For A Field

how i would go about using an if statment against a field in a database.

i.e

if id = "fieldname"
then
do this
else
do this
end if

I am still learning asp and would be very greatful if someone could help me.

View Replies


ADVERTISEMENT

IF Then Statment

i need help with this simple IF then statment.
i want to do this
Code:

IF
response.write objrs ("ok2show") = y
THEN
<img src="http://auditors.demosales.netauditimages<%Response.Write objRS("cnum") %>.bmp" alt="Demonstrator" width="800" height="600"border="7" >
ELSE
<img src="http://auditors.demosales.netauditimagesdefaultimage.jp g"

it's not working it's getting hung up at the response.write objrs part.

View Replies View Related

Sql In Statment

I have an sql statment with an in statment for ID . I'm trying to get the CompanyID in ( ) but all i get is just the word companyID with no value . i used response.write request.form("companyID") so i know the value is coming to the other page, this is what i have now.

Response.Write ("& CompanyID & ")

and this is what i see
& CompanyID &

how do i get the value of companyID in ().

View Replies View Related

Asp Sql End Of Statment

what is missing fromt his sql statment its for an asp page that displays a list of results?

rs.Open "SELECT * FROM downtime WHERE downtime.Entrydate = #" & mediumdate&"# AND Supervisors_name<>"none"", conn,1

i get a message saying expected end of statment and it worked up until i added the AND Supervisors_name<>"none" in to the statment?

View Replies View Related

SQL Statment Variables

I am trying to pass a variable from another page to a sql statment. The variable specifies the one of the columns that I want the sql query to return. I also want to display field contents of the column later in my page. I can't seem to get this to work. Can someone give me a hand? Here is my code:

View Replies View Related

Update Statment

i have this variable:

name="Jones, andrew"

when i update the table it gives an error

here is my update code:

str= "UPDATE tblnames SET Name = '" & name & "' WHERE Id ='" & getid & "'"

can someone tell me whats wrong with it because the name variable has a comma in it.

View Replies View Related

Problem Regarding Asp /sql LIKE Statment

I'm not an hardcore programmer but i try to do a simple search in my asp pages.

I've a database .

I've try this code:

rs.Open "SELECT titre , sstitre , carac , gastro , historique , cepage FROM catalogue WHERE titre , sstitre , carac , gastro , historique , cepage LIKE '"&Request.Form("Sstring")&"'" , conn

But i've that's generate an error in my explorer...

View Replies View Related

Reuse Of A SQL Statment

I have a sql statement that pulls up a certain amount of records according to a requirement. Let's say that 20 records show up. I want to get to the 5th one. Well now I know that I can use the move() function to enable that, but it is the same page.

The page executes the sql statement and by default shows the last record in the query. Now when I ask for the 5th record the page is reloaded, the sql statement exectures AGAIN and the 5th record shows up. Is there way to ask for the 5th record without having to re-executing the SQL statement?

View Replies View Related

ASP/Access SQL Statment

Given the following that results from a form which has multiple checkboxes with the same name value, the resulting string when stored into a variable is this - 129,200,323,330 I used the replace function and got this - 129 OR 200 OR 323 OR 330.

I want to somehow use these values (ints) to specify the particular records in an access database and populate a record set.

When I do this, I get nowhere - "Select * From images WHERE id=" & img_ids
Whereas img_ids is the above string...

View Replies View Related

Database Statment

I've got the following statment in my website:

<%
if session("memberId") = objrs.fields("memberId") then
%>Some Id<%
else
%>Different Id<%
end if
%>

The problem is, if boths are the some number it still displaing Different Id.

Is there anyone can tell me what am I doing wrong?

View Replies View Related

Insert Statment

Now here is my insert statment and it is giving me this error message:

Insert Record
'strSQL2 = "INSERT INTO tblCONTENT_Links (LinkID, ContentOwner_UserGroupID, ContentGrouping, LinkHeaderOrder, LinkDescription, LinkName, LinkURL, LinkHeader, LinkHeaderCategory, LinkRefSite, Active, Archive, UpdatedDate, UpdatedBy, PasswordProtected, CommonLibrary) values ( 141, 7,'public', " & Category & " ,'" & DocumentName & "','" & DocumentTitle & "', '" & Document & "', 0 , 28 , 'www.skyclimber.com', -1 , 0 , #8/27/2004# , 0 , 0, -1)"

IE error:

Syntax error in INSERT INTO statement.

View Replies View Related

What Is Wrong With My If Statment

I'm using the following code on my website:

if left(session("lastPage"), 5) <> "admin" then
session("return") = session("lastPage")
else
session("return") = ""
end if

My problem is even the "left(session("lastPage"), 5) is equal to "admin" it still not equal the variable session("return") to "". Can anyone please tell me why or what Im doing wrong?

View Replies View Related

Error With SQL Statment

What is wrong with this statment:

SQL = "SELECT tblEmployee.*, tblDepts.deptdesc, tblEmployee.Inactive FROM tblEmployee INNER JOIN tblDepts ON tblEmployee.DeptID = tblDepts.deptid WHERE " & request.form("txtSearchIn") & " LIKE '%%" & request.form("txtSearch") & "%%'" & " ORDER BY LastName, FirstName"

I am getting a error:

Syntax error (missing operator) in query expression 'LIKE '%%%%''.

View Replies View Related

Order By Statment

I am hoping that some one can tell me how to add an ORDER BY statement to the following:

<% set rst = createobject("adodb.recordset")
set rst = conn.execute("select RegClassID, StartDateTime, EndDateTime, Description, Location, SpecialNotes from CAL_EVENTS_REG_CLASSES where RegistrationID = "&RegistrationID)
if not rst.eof then %>

The recordset returns fine, execpt I need to be able to order it ASC

View Replies View Related

Dynamic Sql Statment?

im trying to write a sql statment that will insert a variable number of fields into a database the code below is what i want to do but i know this wont work anyone any ideas?
or even if this can be done?


sSQL = "INSERT INTO sometable("&For Each field In Request.Form ; "&Field&"," next ; &")values"('" "&For Each field In Request.Form ; "&Request.Form(Field) &"','" next ; &""')"

View Replies View Related

UPDATE Statment

I'm using the following code in my website that is not working:

Dim objRS
strSQL = "UPDATE tblasp SET view = " & session("NumberOfViewer") & " WHERE id = " & session("aspId") & " "
Set objRS = Server.CreateObject("ADODB.Recordset")
objRS.Open strSQL, objConn,2,2

Is there someone please could tell me what am I doing wrong?

View Replies View Related

Insert SQL Statment

i was using INSERT INTO statment for insrting data to a mdb database file

eg

but now it is not working
there is an error

"Operation must use an updateable query. "

View Replies View Related

Group By Statment Problem

i want to display the number of people logged on at each location... when someone logges in they get a type=1... that works great but when i try to group by the NasName thats the location name.. Code:

View Replies View Related

IsNull Update Statment

I need to know how to do this IsNull update statment in ASP:

"UPDATE tblUsers SET username='" & lcUName & "', hash= IIf(IsNull([lcHash]),"",[lcNewHash]), inactive=" & llAct & ", locked=" & llLock & ", isadmin=" & llAdmin & ", attempts=" & lnAttempt & ", lastlogin=" & ldLastLogin & ", onlyreadaccess=" & llOnlyRead & " WHERE UserID = " & lnSetID

View Replies View Related

Find And Replace & For Sql Statment

i have a qs variable that has a & and i need to query the db, what do i replace the & with to query my data correctly?

View Replies View Related

Insert Statment For Two Tables

ContentID is primary_key ID and it is automaticlly created upon this insert, but want to also insert that content id in table Category column ContentId. Code:

View Replies View Related

Execute SQL Select Statment Error

I'm getting this useful error '80040e14' when trying to run a select statement in an ASP page. The connection to SQL Server 2000 is ok. The variables in the Select statement, 'area' or 'areaid' are passed through form the previous page ok.The code is below... Any ideas? Is it something obviously dense on my part?? Code:

View Replies View Related

Embed A SELECT CASE Statement In An IF Statment

i have a select case statement that checks for a couple of options e.g.

<%select case aParameters(0)
case 0 %>

.. some code

<%case 2 %>

however i would like to test for a certain condition within the select cases statment. To see if a session variable exists before implementing some code:

View Replies View Related

Selecting Multiple Tables Using SELECT Statment Problem

I am Trying to use the SQL SELECT Statment to open records from multiple tables into one recordset.

I know the basic syntax of the Select statment but I wanted to know if its possible to recive the table name from the feild or the record that I am readinf from the recordset in any given moment.

To make things more clear, my example:

-Open a connection

SQL = "SELECT * FROM TABLE1,TABLE2 WHERE TABLE1.UserID=" & uid & " And TABLE2.UserID=" & uid

rs.open sql,conn,3,3

while not rs.EOF

-read from record

rs.movenext
wend
rs.close
conn.close

now, in the part that I read from the record, is their any way I can know if that record is from table1 or table2?

View Replies View Related

LEFT JOIN On A Date Field And A Numerical Field - Using WHERE Clause

I am using a Relational database for my site and i have the following tables:

FIXTURES, GAMEDATES

the fields in FIXTURES are:

GameDate
Home
Away

(All of the above are numerical fields)

the fields in GAMEDATES are:

DateID(integer)
GameDate(#Date Field#)

What i have done is in the GAMEDATE field in the FIXTURES table i have used the ID number of the date that i wish to assign to that record - using a LEFT JOIN to display the actual date that is pulled from the GAMEDATES table (That which corresponds to the relevant id used in Fixtures)

The problem is that in some of my code i want to display records using sql and sometimes in the where clause i use the following:

WHERE Fixtures.GameDate<=(Date())

obviously meaning WHERE GAMEDATE is LESS THAN or EQUAL to TODAY.

The thing is when i use the join it does not use the where clause and displays all of the records in the FIXTURES table.

Does any one know how to get around this, i have not received any error messages it just isnt displaying the right data

View Replies View Related

Update Statment & Error :: Microsoft JET Database Engine Error '80040e14'

I keep getting an error when I try to run this update statment: [CODE]

INSERT INTO MYPosts ( IEname, country, server_name, LANIPAddy, license_ver, wrkstn1, wrkstn2, wrkstn3, wrkstn4, wrkstn5, notes, status, rdse, esc, eso, parent, , timezone, ) VALUES ( '" & lcIEname & "', '" & lcCountry & "', '" & lcServerName & "', '" & lcLicenseVer & "', '" & lcwrkstn1 & "', '" & lcwrkstn2 & "', '" & lcwrkstn3 & "', '" & lcwrkstn4 & "', '" & lcwrkstn5 & "', '" & lcNotes & "', " & lcStatus & ", " & lnRDSE & ", " & lcESC & ", " & lcESO & ", " & lcParent & ", " & lcTimeZone & ")"


I get the following error:

Microsoft JET Database Engine error '80040e14'

Syntax error (missing operator) in query expression

View Replies View Related

Comparing Field Data From Previous Field

Im comparing values in a field while doing a loop if sAct<>myData(5,i) then At the end of the loop I make the value of sAct equal the current myData

This will work when comparing other fields withing my recordset (so I know the statement works) but it will not work for the field I want to compare. The only difference with this field is that it has null values. Could this be the problem? if so, how do I deal with nulls?

View Replies View Related

Fill Field Based On Another Field

I have a input form with 5 fields. One of the fields is MajorNo and the other is named Description.

I have a reference table in my MS Access database (tblMajor)that lists the major numbers and their descriptions.

I would like to have the description field in my ASP automatically filled based on the major number entered on the form, so the user will only need to input the major number when submitting to the Access table (tblSalesTotal).

View Replies View Related

Pass Hidden Form Field Value To Another Form Field To Insert In Db

I am trying to pass a hidden field value on a form into another field on the
form so that it can then be inserted in the database, to enable me then to
reference that number at a later date.

(The hidden value (1 for example) would then automatically get passed to the
other input field.)

The code for the text field that allows users to type an number into it for
submission to the db is below, but what code do i need within the hidden
field to populate this text field below so that users do not have to type the
number in? Code:

View Replies View Related

How Can I Change One Line Input Field Into Larger Input Field

I have being working with making an edit field over the past few days. The edit function is now working fine. The edit fields that i have are for id, subject, notes, timedate.

All of the edit screens are one line text screens. What I want to do now is increase the size of the notes box to a larger textarea type box to make it easier to edit notes. The notes field in the db is a textarea field. Code:

View Replies View Related

Automated "state" Field From "Country" Field

When you select the "Country" field in a Hotmail "get new account" link, the field "State" changes automatically, giving you the correct States that belongs to the chosen Country.

View Replies View Related

Request.Form("Field Name") Versus Request.QueryString("Field Name")

I want to know what's the differences between

Request.Form("Field Name") and
Request.QueryString("Field Name")

OR they function exactly the same, which is to return the value of the
field??

View Replies View Related

Field Value

I would like to capture an entered value and use it in a query (Access)

Part No. __________

Do I need to store it in a variable and then can I have the query come up on the same page - they would enter a value and click a submit button. I'm not sure that I am on the right path. I'm not sure what syntax to use. Code:

View Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved