I was hoping to create a page that would display a larger image if a user wanted to get a better look at a thumbnail on my site. I understand that I need a small image and a large image to start off with. The bit I'm interested in is having a designed page for the larger image to be displayed in, not just a plain white page - I'm hoping to have a "Close Window" button on it.
Can I hard code the bit after the ? in my URL for each image? Is that they best way of doing it? Does it need to be on a Form?
I have a flash image in my asp page. In the left navigation i have some names say limestone,clay,granite etc. My problem is that when i click the limestone i should get some identity value in my asp page for suppose id=limestone for limestone, similarly for clay and granite. i.e, for clay i should get id=clay in my asp page.
I have an ASP page with a header (title) and a long image. I get the image name from the database and write out the image's "src" attribute using response.write. Easy stuff. But when I print the page using Internet Explorer, the header prints on the first page, but the image shows up on the second page. (the image is too large to print on one page) Is there any way to force the image to start printing right underneath the header and not go to the second page? I've looked into CSS to see if I can force this somehow. No luck. If I make the image smaller, it prints on first page. But I don't want to do that.
I have a client who has had a ASP site with an Access database for several years. It stores information for the used cars on his lot. I have stored text in the database that points to the location of the image for each record. Each record will have a thumb image that is supposed to display in a list of vehicles available then the user can select an item from this list and a new page displays with the information and the regular size image. So far everything has worked fine exept for the display of the images which are stored in a separate directory called veh-photos. All I get are image place holders. I am using Dreamweaver 2004 and and Access 2000 for the database.
1.I want to show a image file of type '.tif' in the browser window; for that I'm writting as ASP code page.
2.This '.tif' type image can be shown better with 'Kodak Image Control'.
3.To have this 'Kodak Image Control' on my code page I just add it's ..ocx to tool box and then drag it from 'Toolbox' to the page.
4.Now after dropping this control to the code it's type is getting changed to 'object' instead of type 'ImgEdit'(and I think this is the reason I don't get correct result).
5.On one button's 'Onclick' event I'm calling a javascript function with which I'm setting a 'Path'and'Display' property of a control.
6.And want to show a image at location -- '..MFTDRCMF919685173-62.tif' which get shown in new browser window but could not get shown in that particular control. That means the path is correct, then what is the problem?
For better understanding of problem I'm pasting a following code which I've tried up till now...... .................................................. <%@ Language=VBScript %> <% OPTION EXPLICIT %>
<HTML> <HEAD> <META NAME="GENERATOR" Content="Microsoft Visual Studio 6.0">
<SCRIPT LANGUAGE=javascript> <!-- function showpic() { var path; path = document.frmtif.path.value; alert(path); document.frmtif.ImgEdit1.Image =path; document.frmtif.ImgEdit1.Display; window.parent.self.open(path); }
I am creating a dynamic ASP VBScript page, which gets data from an Access database.
In the database, there is a field which holds a URL to an image. I can get the image to display fine, but where there is no file that matches the URL (i.e. a missing image) I want to display an alternative, default image (e.g. one that says "Awaiting Image"). The field is never blank, but the image file may not exist for all records in the database.
I think what I am trying to get to is the following:
If file exists (using URL from database to get location of image file) then display image using the url from the database as the image source else display default image - hardcoded in program endif
I have had a go and come up with the attached but I get an error with my if statement...
Is there a way to have an asp page displayed with all the data from a db but not truly getting the data from the data base.
I want to perform updates to the data base and not have them "publish" untill I say go. I figured one way to do this is to have two tables (one live and the other pre-production) of the page and just copy the preproduction table the live table when ready. But, I read in some search engine optimization artcle that there is a way to basically have a pure html version of an asp db driven page so the search bots do not ignore it. Does anyone know of something like this?
I'm working on a project where I'm suppose to upload a image to a server. The uploading works fine but when I want to change the image I uploaded to another image I can't get the filepath of the old image to show in my "filefiled"....is it possible to set a "value" where I can retrieve a filepath in a form if the input type is "file"?
This worked fine for enlarging my images until i put it onto a secure server, anyone know how i can fix it ??? just comes up with the standard box with a red cross in it .. and the url when i click image properties says: http://url/images/<%=request.querystring( which is only part of the code)
I'm looking for a simple way to merge an image into another image.What i have is a screenshot uploader, and i want to make it so that when they upload the SS, the script will automatically merge a small copyright type image onto the bottom right of the picture.
I created a web page from Excel2000, using "Save as web page..."...Publish function. then, I moved htm file to my IIS web server. Then I added a form control, and submit button.
How can get the data on the excel file using ASP from server side? For example, the value of Cell(1,2), Cell(2,3)....
What I want to be able to do is create a user control that will display an entire page page within it. Does anyone know how to do this or better yet have any same code?
I like to know how to write this specifc function on ASP where the user eg: display a set of records on the webpage. Example the data are ID, Name and address.
Lets say i display the data on the webpage and i set the Name as the <a href>. So when i click on the name, it will move to another page with the id of the specific name. Code:
I have an ActiveX control in my ASP page that has not been signed yet, so currently just for testing I set the Security for Intranet to "Low". When I run the ASP page on my machine (the IIS is in my machine), I have no problem, except the page prompted me with "An ActiveX control on this page might be unsafe to interact with other parts of the page. Do you want to allow this interaction?"
But, when I run the ASP page on another machine (even though the other machine is also a development machine that already has the ActiveX control and I set the Security for Intranet to "Low"), it did not prompt me the above message, and I got an error when accesing any method of the AX control (e.g Object doesn't support this property or method 'myAXControl.method').
Is this because I have to create a CAB file and mark the AX control as safe for scripting ?To create a CAB file for this AX control, do I need to create my own VB AX Control project that contains this control and then create a cab file for this VB project ?
This is a standard ASP application that has several pages at the root withthe global.asa. I set a session variable session("accountid") = "123456" within an asp page and then response.redirect to the next page and immediately response.write session("accountid") and I get back nothing.
But if I set a session variable session("accountid") = "123456" within an asp page and response.redirect to a page in a sub directory and immediately response.write session("accountid") I get back 123456 on the screen.
I am having a problem with a site that I am developing - my aim is for it to validate as XHTML Strict however, I am running into a couple of problems validating it; in my Response.Write ASP script, I am not including " 's to define page element tags as they keep throwing up errors in the page. Code:
I've a strange problem with Windows Vista, running an ASP page on local machine (http://localhost/test.asp), the page does not give me any error but the asp code is not executed (simple code : <% response.write("hello") %), it show me a blank page, I think I've put all the setttings correctly, but maybe I must do something obvious to fix that.
I encounter a page reload situation in ASP. It is I need a way to differentiate whether the current page - "Application_Result.asp" got reloaded itself when user click on the browserRefresh button or is requested by the previous page "Application_Form.asp".
I tried using <%if Request.ServerVariables("REQUEST_METHOD") = "POST" then%> <!--it is requested from "Application_Form.asp, do something--> <%else%> <!--Application_Result.asp refreshed itself(such as user clicks on the browser Refresh button, do something else--> <%end if%>
However, in both cases, the IF statement above all evaluated as true. how to differentiate this two different behavior (Page Refresh versus Page requested by another Page) ?
I have page for user to update his/her details. What i want is after idle for more than 20 mins, the page will redirect to login page automatically. So that the user knows that his/her session already expired and need to login again.
But it doesn't working. This is because if he/she update the details (after idle more than 20 mins), and click the Submit button, it will go to login page and all the data will be lost. Code:
I need to verify if images exist and all I have are the URLs to the images,therefore using the FSO is out of the question.
Is there an easy way to check http://www.thisdomain.com/images/03245.jpg and see if it exists.If not,I'd like to show an "image not available" graphic instead.
I am looking to store images within my database. I would like to be able to store the paths, within my tables so that I can set a pointer to the externally stored image, that I can pull my image from and place on an asp.net page. How would i go around doing this, is it as simple as taking the file directory and commiting it to my table?
What I need to do is to get the id of an image and set it to a variable that I can use throughout the page. What I'm trying to do is see how many images I have on a page, place there id values into an array and then based on their ID values call the function to change the image.
See i have the same image being generated on some rows that are brought into a database. They a named with a number after each ie:image1 image2 and so on but because I have other elements it would take too long to check through them all.
I am working with a developer, on two portions to a site, he is working in PHP and my work is done in ASP.
Is it possible for my pages to request data from a cookie that was written by his pages that are PHP but residing on the same server? Just want to make sure before I spend too much time planning out the development on my end.
I have an application which allow users to search our database. Quite a lot of search fields pull data from other tables. I don't want to populate the dropdowns (total 14 of them) from the database everytime as it slow the page load.
Instead I would like to have a link next to the text field which a user and click and the choices can be displayed and whatever the user click in the pop up I want to transfer it to the text box and close the popup.
For example there is a Textbox called country. The user can either type in the country name or click on the link which will pull all the countries from table in the database and which ever country user selects, the textbox is popluated with the country name and the pop up closes automatically. Code:
I'm trying to write an asp page line by line, as one would create a text file, only my file will end in .asp.
One line simply writes a close ASP code tag, or
FILECONTENTS=FILECONTENTS & "%>"
When this line processed, an error occurs saying that the string was never terminated because the asp page attempting to write this line of code to a NEW asp page reads that close ASP tag (%>), as an actual close asp tag for itself, instead of a STRING value.
How do I write this %> symbol to a new asp file, while still maintaining its purpose to close a group of asp code in the newly created page?
But as i carry some data from previous previous page, when i use (window.opener.location = window.opener.location), it can't capture my data as it just load the page. It will pop up error as no data captured :
Microsoft VBScript runtime error '800a000d' Type mismatch: '[string: ""]'
I am looking for a way to pass an ADO recordset that has been retrieved in an ASP page to another HTML-page. Is there someone who can provide me with a small sample or a link to see how this is done?
i am facing a problem with CrystalReports for visual basic.Net 2003. I have passed almost through all the problems but still i get a message when i view some reports "Page header or footer longer then a page".
I am using ASP.net with VB and the developing muchien is running windows XP. the program works correctly to my computer but when i transfer it to the server machine i get the error .
The server machine is running windows 2000 server. It has the service pack on it and framework 1.1 with all the updates. Does anyone have a clwe?