Jmail.SMTPMail Error '8000ffff'
I'm trying to use JMail to send the contents of a forum. This is the code i'm using:
Set JMail = Server.CreateObject("JMail.SMTPMail")
strServer = Replace(request.servervariables("SERVER_NAME"), "www.", "")
strClientIP = request.servervariables("REMOTE_ADDR")
JMail.ServerAddress = "smtp."&strServer&":25"
JMail.Sender = "" & email & ""
JMail.Subject = "" & itemname & "(" & id & ") - " & subject & ""
JMail.AddRecipient "email@domain.com"
JMail.Body = "" & message & ""
JMail.Priority = 3
JMail.AddHeader "Originating-IP", strClientIP
JMail.Execute
Set jmail = Nothing
However, this doesn't work, and I get the error:
jmail.SMTPMail error '8000ffff'
The message was undeliverable. All servers failed to receive the message
contact2.asp, line 36
Line 36 of this script is: JMail.Execute
I am 100% sure JMail is installed, as it was previously working, and this is the script my host says to use.
View Replies
ADVERTISEMENT
I am testing JMail through ASP on my local server so I can just swap out serverAddress when it goes live to make a simple switch with our live server.
However I KEEP getting :
The message was undeliverable. All servers failed to recieve the message
jmail.dll was installed into windows/system32 and regsvr32 jmail.dll was successful.
Here's the code; I specified :
localhost:25
mail.locahost:25
mail.localhost.com:25
127.0.0.1:25
all with and without the :25 on the end. No go. Same error. Here's my code :
View Replies
View Related
Can anyone please help me with this. I have same code to send the emails. But once in a while i am getting this error messages. Could you please tell me what might be the possible reasons that makes this occur.
jmail.SMTPMail error '8000ffff'
503 must have sender and recipient first
Here are the program details: ....
View Replies
View Related
Has anyone tried using SMTPMail on a Windows XP Pro machine? The sys.
reqs. on their site only says W2K (and prior).
I've successfully registered SASMTP.dll, and simply trying to
instantiate it in Classic ASP with:
Dim objMailer
Set objMailer = CreateObject("SoftArtisans.SMTPMail")
results in an error:
Microsoft VBScript runtime (0x800A01AD)
ActiveX component can't create object: 'SoftArtisans.SMTPMail'
/test.asp, line 12
View Replies
View Related
<%
Set myMail=CreateObject("CDO.Message")
myMail.Subject="123"
myMail.From=(Request.Form("email"))
myMail.To="11111@yahoo.co.uk"
myMail.TextBody=(Request.Form("comment"))
myMail.Send
%>
and i get this error
Microsoft VBScript runtime (0x800A01A8)
Object required: 'SmtpMail'
I have tried using the
SmtpMail.SmtpServer = "localhost"
in the code but no joy.
View Replies
View Related
I believe that the SMTPMail component is part of ASP.NET, although I may be wrong, but is there anyway of using it in normal ASP scripts??
I ask because I need to send an email via my script, to a preset email address and containing the same message each time it is sent, and I have my own SMTP server (linux based) which I would like to utilise.
I also cannot use CDOSYS for this, tried everything but cannot get it to work on my machine
Failing that, does anyone know of a freeware component that will enable me to put normal SMTP commands into my scripts, just so I can send an email to a specified address, containing a basic body and using the SMTP server I have.
View Replies
View Related
Ive been trying to send an email (via iis smtp virtual mail server) using the SmtpMail class in asp.net, but i keep getting a failure to deliver message. Is there something im not doing?
MailMessage mail = new MailMessage();
mail.From = "oh_neil@yahoo.com";
mail.To = "to104@gre.ac.uk";
mail.Body = "Test email";
SmtpMail.SmtpServer = "localhost";
SmtpMail.Send(mail);
View Replies
View Related
I retrieve data from a database and I put the data into an array. Afterwards I want to send these data as an email using JMail. The problem is that I receive the following error when I am trying to send the email: Variable uses an Automation type not supported in VBScript. On the other hand if I try to print them on the screen there is no problem.
View Replies
View Related
I am running into a wierd error while using W3jmail. The error is: Error Is:
jmail.Message (0x8000FFFF) The message was undeliverable. All servers
failed to receive the message
/reclaim/app/email/WA_Universal_Email/JMail_VB.asp, line 126
The thing that is wierd about it is the fact that the email sends even though the above error is displayed. Has anyone run into this before? or have any suggestions on how to eliminate the error?
View Replies
View Related
I got Jmail to work fine. My problem is I need to send an email based
on somthing a customer submitted. When we receive the submission in
our system an auto-receipt email will be sent. What I need to have
happen (and cant figure out) is that email to include what was received
not just a on liner saying it was received. The information is pulled
from the db with a query. Anyone got any suggestions?
View Replies
View Related
I am currently trying to code a newsletter script with asp using jmail. I've seen hundreds of examples on the net that accomplish this but there is only one problem they all use a do while statement that sends one email at a time. When I do this the server times out because my list is so long. So I have been trying to write a scrip that uses the BCC function to send one email to everyone at once. Unfortunatly I can't seem to get it to work. Does anyone have any ideas how I can do this?
View Replies
View Related
I'm using 20/20 Applications Pure-ASP Upload. It works great as far as uploading the files to my server. Now I have another question. Can you tell me how to attach the file from my server to the email. What I need to happen is when a user attaches a file, the files is uploaded to the server and then when they click on finish the email is sent with the file attached to it. I'm using the JMail function....
View Replies
View Related
I am some what new to asp and programing. I have put together this code, so I can send out a mailing list to some users. The code looks and seams to run fine. But I dont receive any test messages during when I execute it. it's like the SMTP sever is not sending the emails....
View Replies
View Related
I can get it to work with following code:
<%
Set JMail = Server.CreateObject("JMail.SMTPMail")
JMail.ServerAddress = "smtp.stormvision.co.uk:25" ' change this to your mail server
JMail.Sender = "a@p.com"
JMail.Subject = "Enquiry"
JMail.AddRecipient("marcus@stormvision.co.uk") 'here type in your email address again
JMail.Body = ("Email : " & Request.Form("Mailto") & vbcrlf)
JMail.appendtext("Full Name: " & Request.form("Name") & vbcrlf)
JMail.appendtext("City : " & Request.form("City") & vbcrlf)
JMail.appendtext("Telephone : " & Request.form("telephone") & vbcrlf)
JMail.appendtext("Postcode : " & Request.form("postcode") & vbcrlf)
JMail.appendtext("Comments : " & Request.form("comments") & vbcrlf)
JMail.Priority = 3
JMail.Execute
%>
The trouble is says that every email is from a@p.com
So i modified the JMail.Sender line to
JMail.Sender = Request.Form("Mailto")
But am struggling to make it work.
View Replies
View Related
I'm developing a web site with email capabilities: I have tried the free version of Jmail, now I need Jmail Professional but still don't want to buy it before having the chance to try it....
View Replies
View Related
I have a web page coded in ASP VBScript which sends a html email using the Jmail.SMTPMail object.
I am trying to attach a .csv file to the mail but when i get the mail through it won't display. It just shows this in the mail body...
This is a multipart message in MIME format. ----NEXT_BM_46A46859F09247848CB1A7C3EBE06AC2 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: Quoted-Printable
Here is my code ....
View Replies
View Related
I am hoping to use JMail to read pop3 mailboxes via an ASP page. I have a tutorial from the website (http://www.dimac.net/Websites/dimac/Website/Products/w3JMail/{C7EFB42E-5C6C-49D4-91B7-00C7E9388A96}?exId={553CC37F-7EB7-4D47-907C-1B75FE043B03}) but can't get it to run on the server. Does anyone have any idea why this code will not run?? I have entered the correct username,passwords into the script.
View Replies
View Related
My host does not support CDONTS for sending email, but instead uses JMAIL. I have a example of the code i need (in CDONTS) but need to translate it into a JMAIL version for it to work with my website.
<%
Dim objCDO
Set objCDO = Server.CreateObject("CDONTS.NewMail")
objCDO.From = Request.Form("EMAIL")
objCDO.To = Request.Form("POSTER_EMAIL")
objCDO.cc = Request.Form("EMAIL")
objCDO.Subject = Request.Form("SUBJECT")
objCDO.Body = Request.Form("MESSAGE")
objCDO.Send()
Set objCDO = Nothing
%>
View Replies
View Related
I have JMail installed, and when I code for remote servers, I am able to send the mail just fine, however I have yet to figure out how to test locally with IIS 5.1's mail server.
Does anyone have some information on how to setup the local system so I can test this feature before I script for it remotely? I'm sure that there 2 key points where I'm having a problem is
1. Setting up the IIS Mail Server
2. Defining the Mail Server in the JMail ASP code....
localhost:25
127.0.0.1:25
View Replies
View Related
i am using a form that sends an e-card..to explain briefly i am giving the code:
Set JMail = Server.CreateObject("JMail.SMTPMail")
JMail.ContentType = "text/html"
JMail.CharSet = "ISO-8859-9"
JMail.ServerAddress = "mail.mydomain.com:25"
JMail.Sender = "bla@mydomain.com"
JMail.AddRecipient theiremail
here problem comes. when user enters a different e-mail address (not same with my domain)
it gives error. how can i solve this problem.. can jmail send an e-mail to differents domains?
View Replies
View Related
I have a Jmail form with several texfields incl. email and name of users. The mail is sent from me "John Doe" "email@domain.com" to the user filling out the form. When the e-mail is being sent it looks like this: Code:
View Replies
View Related
I’m creating an application that uses JMail to send email. And it works great!! as longs as I don’t try to add an attachment. However, I really need to have my users be able to add attachments; otherwise the purpose of this application is null and void.
I know that the file that is attached needs to be uploaded to a file share folder via FTP then encoded before being sent. My problem is that I don’t know how to code it. This is the JMail code that I am working with: I need some help in getting the code other than (Jmail.addAttachment) for adding the attachment......
View Replies
View Related
I had a problem with my webspace provider and CDONTS so I gave upon that front. I am now trying JMail which seems to be working, so now I need to transfer all my formatting from CDONTS to JMail.
I have a question on the formatting of a Jmail email.
I have the following snippet of code which details the variables and contents of the body of the email
body = "Name:- " & Request.Form("firstname") & " " & Request.Form("surname") & "<p>" & Request.Form("number") & "</p>"
I want to insert a line break/paragraph between Request.Form("surname") and Request.Form("number"). As you can see I have tried dong this with <p> tags and also <br>'s. However the tags are outputted into the email and not acutal line breaks.
Any ideas as to how to format the body of the email?
View Replies
View Related
I was wondering if you guys have tried to use JMail's AddURLAttachment when
mailing? i cant get that simple thing to work. i have this:
<%
set mail=server.createobject("JMail.smtpmail")
mail.ServerAddress = "192.168.8.2"
mail.addurlattachment
"http://www.100procent.com/lasse/lasse.jpg","lasse.jpg",true
mail.Sender = "k@100procent.com"
mail.Subject = "kk"
mail.Body = "Kkk"
mail.AddRecipient "lasse@100procent.com"
mail.Priority = 3
mail.execute
set mail=nothing
%>
when i run it it mails and the attachment looks fine, when i try to open it
the open/save as dialog shows and i click open, and then it opens the
system32 folder, it didnt say anything about the file i was trying to open.
then i try to open again and then it asks for a lasse1.jpg, next time
lasse2.jpg, wtf is up with that?
View Replies
View Related
I want to use Jmail in an asp page but not sure how. I did the codes but when i run it give me Error Type:
Server object, ASP 0177 (0x800401F3)
Invalid ProgID.
What should I do?
Code: .....
View Replies
View Related
I'm trying to send an email to customers with their order information. I thought I had it working because I had been using my email. But when I changed and use an email outside of "______@faceproject.org" I get an error that says it cannot be found.
Here is my code:....
View Replies
View Related
for some reason i cannot send PDF's as an attachment, every other file type i try sends fine, but not pdf's..
could anyone please tell me why this is, and if there is a work around for it?
I'm running JMail 4.7
View Replies
View Related
I am trying to send email with Jmail component i am attaching a picture with it and its not working and giving me an error which is as follows
jmail.SMTPMail error '8000ffff' Cannot open file C:InetPubDevSecureBelord
hino_small.jpg ....
View Replies
View Related
I've been searching high and low for a decent comparitive analysis of the various e-mail components for IIS (specifically for use with ASP).
Here are a few that are pretty common: ASPMail - I've been using this, but it seems that if the SMTP server is backed up, it slows down ASP page that submits the mail, apparently because this version does NOT provide message queuing
ASPQMail - This component provides the queuing options, which theoretically would avoid ASP slowdown when the SMTP server backs up. Unfortunately my host doesn't offer this component.
CDONTS - Comes with IIS, so widely supported
CDOSYS - Comes with IIS 5 & later
JMail - A free component, also widely used. Documentation is poorly translated into English and difficult to follow.
Putting aside the fact that every web host supports a different set of mail components and "your mileage may vary"...
What is the best-performing solution?
View Replies
View Related
I´m trying VP ASP Shopping cart, but the free version doesn´t allow us to
send an email to our customers and to ourselves with the confirmation of the
order.
I would like to know if there is any code sample or script that can easilly
be included when the invoice appears in the screen, so we can send the
invoice automatically by mail to the costumer to confirm the order and to us
to let us know the order was made!?
I would prefer to work with jmail, but if it´s not possible it can be
another.
View Replies
View Related
I'm reading the items from the db and writing them out as checkboxes.
Mag 1
Mag 2
Mag 3
I have them all checked when the form loads.
I want to send the checkboxes that are checked via jmail, hence i won't be inserting
any responses into the database.
View Replies
View Related
I have problem sending attachment (word document) using JMail. Here is my asp file: Code:
View Replies
View Related
Error shows in browser as
Microsoft VBScript runtime error '800a01f4'
Variable is undefined: 'JMail'
/SendEMail2.asp, line 38 ....
View Replies
View Related
