is anybody know how to capture lan id(localhost id ) address in lan. u can check the same under dos using command ipconfig. but i am not geting the same id using bewlo code
<% Response.Write Request.ServerVariables("REMOTE_ADDR") %>
Installing IIS and getting a strange error.
..Error Type:
Active Server Pages, ASP 0134 (0x80004005)
The object has an invalid ProgID of 'MSWC.MyInfo'.
//global.asa, line 1
This error comes after on Page not Found error after entering http://localhost .I have done all the localhost not found suggestions in the localhost not found thread. I also looked up the error in the knowledge base and the Anonymous login was not checked for the localstart.asp file. I also ping 127.0.0.1 just fine.
I download an application from a 3rd party for a forum that uses Microsoft Access. When I try to log in, I keep getting an error about the database being read only. I go to the hard drive and right click and uncheck "Read Only" but it never works, I've done this on the database file, the directory it is in, the parent directory, the wwwroot directory, the Inetpub directory.
View Replies View RelatedI have just uploaded my asp pages online and set permissions to to read write and execute but i am still having trouble, it displays this message.You are not authorized to view this page
The URL you attempted to reach has an ISAPI or CGI application installed that verifies user credentials before proceeding. This application cannot verify your credentials.
Please try the following:
Contact the Web site administrator if you believe you should be able to view this directory or page.
Click the Refresh button to try again with different credentials.
HTTP Error 401.5 - Unauthorized: Authorization failed by an ISAPI/CGI application.
Internet Information Services (IIS)
I need to grab the full url of the virtual server server of the image
directory
We've had a Fasthosts reseller account for quite a few years now and have been relatively happy until now.Unfortunately they've started to push out MySQL DBs (I think 4.2.x or 5)that don't work very well with classic ASP and basically said you can b*$£*"s if it don't work with your apps.
In which case, we do not wish to pander to the FHosts machine anymore and are looking for a new host.Bearing in mind what the Windows based FHosts reseller account can provide,can anybody suggest a better host?
Please note we were stung badly by 2 'from the attic' ISPs before so wedon't want to go down that route anymore.
I need to get visitors ip address and host name when visitor visit my homepage. Can someone please paste an example of an asp page that handel this ?
View Replies View RelatedDoes anyone know how to add a host header to a web site running IIS 5 using ASP?
View Replies View RelatedIs it possible to host ASP (not .net) to host on Linux,( hopefully yes then whats required extra on Linux). If some one know any issues related to that or any reference site hosting
ASP on linux.
My web host uses CDOSYS to snd mail. right direction to get some code for this please?
View Replies View RelatedI recently moved all my files and db to a new host. I cannot get the site to function properly. The site appears to be pointing to an old test template my programmer set up, and not my index page. I have lost my programmer, and I don't know ASP at all.
View Replies View RelatedI haven't ever used ASP on a web host but will most likely be shortly with a members area and was just wondering if someone could answer these questions. Do I have to have the ASP files in a certain file and with the database?
Do I only need to have the asp files or do I need a file like adojavas.inc like if I am using in on my local computer with a web server?
I'm trying to obtain the IP of the hosts connected to my webserver.
Code:
<%
on error resume next
'trying to obtain host IP
ip = request.servervariables("remote_addr")
response.write "IP addr: " & ip & " --- "
ip = request.servervariables("remote_host")
response.write "IP host: " & ip
%>
If I use the above script, it shows me the IP of my ISP webproxy, not mine.
I am writing a website in asp for a take out restaurant. Customers can place order from their website. What I want to do is, print out the order form from the restaurant's printer when an order is placed, so none is required to manually print out the order list. Is it possible and how??
View Replies View RelatedI'm sending emails to a database of 2000 people (that will be double
that in the future). My web-host provides ASPQmail. I have to send the
emails out in groups of only a few hundred at a time to avoid the page
timing out (I have set the timeout value to a very high value). Once in a
while it seems as if either the SMTP server or the web server is running
slowly and I can't get it to send even a few without timeout problems. I
never get the log file showing anything.
Is there a better web-host situation and email/SMTP I should look for?
Do I need a dedicated server? Any suggestions as to how to go about a bulk
email scenario? At least when I do have problems I would like to know
which clients received their mailing and which ones didn't.
I have been using the ShellApplication object in an ASP script to
retrieve some file characteristics that the FileSystem object does not
access (this is one of my clients' sites on a commercial host, running
IIS 6.0).
The script ran perfectly for about 6 months, then began returning
"Microsoft VBScript runtime error '800a01a8' Object required". The code
had not been changed. The script doesn't produce an error on the
creation of the object, but at the first use of it.
The hosting company rebooted the server and it again worked fine, but
then failed again.
The hosting Co's attitude is "you are the only client using this object
and the only client affected by it failing - find a different way to do
what you want to do"
My contention is that they started/stopped doing something that has
caused this to fail and just don't want to be bothered
researching/fixing it (I use the object with no problems on several
other hosts).
Can anyone shed some light? Is there a known problem with the object or
something known to cause it to fail?
When I use this command in a webpage
Response.Write "<a
href=""javascript:window.open('events/EventDetails.asp?EventID=" &
theEventID & "' )"">" & theLinkText & "</a>"
I get the new window to open but it also affects the "host" window. The "host" window is left with the word "[object]" in it. If I refresh the window that says [object] the new window opens again. Why and how can I make the new window open without affecting the previous one?
When I use a host file entry to point to the host header of the site
that I have created on a Win2k server running IIS5, a cookie is not
created to hold the session id. The result is that Session_OnStart is
run every time a page is requested.
If I set up a DNS entry on the DNS server it all works fine.
I never noticed this problem before we put in Active Directory so it
may have something to do with that.
I have set "allow per session cookies" to promt(under Custom Secrity
settings in IE) to see if this is being attempted and it is not. So
the browser is not even trying to create the session cookie when using
the host file.
does anyone know how to run a .wsf file from an ASP page?
View Replies View RelatedI have two .aspx web pages. The first one has a form with ASP textboxes, validation controls, an a submit button which calls an event handler using VB to insert data into an Access database then redirect to the second page.
Both pages work fine on my local host computer (IIS). But on my remote host, when I click the submit button, it just sits there and does nothing. When I remove the validation controls, the event handler works fine.
How can I get the validation controls to work on the remote server?
I've just been caught out by a host that doesn't support #includes in my
ASPs. What's the best strategy for replacing these calls to files that
include everything from subs and functions, global constants, other
#includes, script directives, etc.??
Is there a way to test if a host supports Collaborative Data Objects like
Server.CreateObject("CDONTS.NewMail")
something like phpinfo to show the servers ASP setup? which components are installed etc? i've got a form mail script im testing that seems to parse ok (no errors),but am not receiving the email at any of the recipient addresses im sending it to.
Is there anyway I can get the information about a file on the local machine of a user that is reading pages from my web site? Scripting.FileSystemObject does not have permission to do this, and I want to check the size of a file before I try to get it uploaded.
View Replies View RelatedAn application runs on server, and is used for Hour-registration. Now I want to run the application local, I use SQL Server 2005, and managed to fix connection changes.
But now, I get this error everytime I run the application:
Microsoft VBScript runtime error
Error Code :0x800A01CA
Error source :
Error Description :Variable uses an Automation type not supported in VBScript
Any solution please?
The webserver I'm using (which I can't make any changes to) has a
Dutch-localsettings. When doing simple calculations the decimal-symbol in
ASP is a , (komma). Is it possible to force IIS to use a . as decimal symbol
by code? (IIS5)
I would like to evaluate some shopping cart software to use on my next project. I am new to asp and as yet my hosting does not support it. Before I go ahead and upgrade my hosting I wanted to see how the various packages work.
I am running XP Pro SP2 and have installed IIS. The folders seem to be where they should be and I have access to the settings through the Administrative Tools.
When I put a htm file in the wwwroot folder it loads fine if I type http://localhost but the asp files are either downloaded or opened in dreamweaver.
Do I need to do something special to enable asp files to open on my local machine??
I'm not a networking/IT guy, but I was put in charge of figuring out how to use ASP to tap into an Oracle db for my office. I am using a windows 2000 laptop, and I want to be able to run ASP code on my local desktop (without being plugged into a network).
I need a lot of help here. I know I have to turn my computer into a webserver, but I'm not certain what I need to do with the IIS. What do I need to do in general to make my computer a webserver? In addition, I will be using a local Oracle database. So I wasn't sure what I would need to do to make that db available for querying with ASP. What is the best way to make that connection?
Anyone who can point me to useful documentation.
I am running this code on my local IIS and everything works fine. The code detects the file I select using the INPUT TYPE=FILE. The problem is that when I move this code up to my host’s web server, it never works as in it never finds the file. It is the exact same code so why is it working on my local IIS but not on the web server? It is ASP code.
Code:
set fso = createobject("Scripting.FileSystemObject")
If fso.FileExists (strValue) then
'File exists continue with code
Else
Response.Redirect("aspError.asp")
End if
I need to setup my home computer to view ASP files like I veiw PHP files through Apache2Triad or some other similar installer package.
I'm using Windows XP Home,is this possible?
I am trying to set up an internet page on our intranet that contains logoff/shutdown and restart buttons.This needs to work in a remote desktop situation which rules out various options.
Next stage is to call this .exe from a webpage...which I'm struggling with. My test code (to test a reboot) is below but doesn't seem to work. Can anyone help remembering this needs .exe needs to run on the local machine and not the server.
I have a computer running Windows XP home edition and i would like to have a local web server for testing my classic asp pages.
View Replies View RelatedHow do I execute a users program from a web page? When a user goes to a webpage - I want a link on that page that will execute a program on the users local hard drive - like say...notepad.exe . Everything I have tried will only execute it on the server.
View Replies View Relatedhave an SQL DB which clients access via asp pages through the internet, in the case of a power outage I need to write that data automatically in the background to a txt file on their local machine, I would imagine it would involve a script of some kind.
View Replies View Related